cryogenics/Oxford-Instruments-IPS.md: Corrected table formatting.

Author: iangillingham-stfc

doc/specific_iocs/cryogenics/Oxford-Instruments-IPS.md

@@ -110,11 +110,11 @@ stateDiagram-v2
 
 There are various IPS units here is a list of the ones we know the settings for (Lab view settings are in `...LabVIEW Modules\Oxford Software\TESLTRON.INI`):
 
-Setting | Description | IN LabVIEW                                  | 7T Magnet | 9T Chopper Magnet (LET)
-------- | ----------- |---------------------------------------------|------------ | ---------------
-`STABILITY_VOLTAGE` | 5 voltages are compared and they must differ by less than this to be declared stable | hard coded                                  | 0.1 | 0.1
-`MAX_FIELD` | Maximum field | `PS0MaxField(2.2K)` and `PS0MaxField(4.2K)` | 7.0 [1] | 8.8 [2]
-`MAX_SWEEP_RATE` | Maximum rate of change of the field in B/min | `PS0MaxSweep(4.2K)` and `PS0MaxSweep(2.2K)` | 0.399 | 0.3990
+| Setting             | Description | IN LabVIEW                                  | 7T Magnet | 9T Chopper Magnet (LET)|
+|---------------------| ----------- |---------------------------------------------|------------ | ---------------|
+| `STABILITY_VOLTAGE` | 5 voltages are compared and they must differ by less than this to be declared stable | hard coded                                  | 0.1 | 0.1|
+| `MAX_FIELD`         | Maximum field | `PS0MaxField(2.2K)` and `PS0MaxField(4.2K)` | 7.0 [1] | 8.8 [2]|
+| `MAX_SWEEP_RATE`   | Maximum rate of change of the field in B/min | `PS0MaxSweep(4.2K)` and `PS0MaxSweep(2.2K)` | 0.399 | 0.3990|
 
 [1] - The limit may be lower on some beamlines due to the construction of their sample area. Below are known cases: