diff --git a/docs/installing-boot9strap-(mset9-cli).md b/docs/installing-boot9strap-(mset9-cli).md index a79d8c5ed91ef..62237bbb3e97a 100644 --- a/docs/installing-boot9strap-(mset9-cli).md +++ b/docs/installing-boot9strap-(mset9-cli).md @@ -130,7 +130,7 @@ In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-mset9#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) - + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter key combo blindly. Press the following buttons on your console in this order: + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A 1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console diff --git a/docs/installing-boot9strap-(mset9-cli-ios).md b/docs/installing-boot9strap-(mset9-cli-ios).md index 028fe850ac74b..7eeb74e4831d3 100644 --- a/docs/installing-boot9strap-(mset9-cli-ios).md +++ b/docs/installing-boot9strap-(mset9-cli-ios).md @@ -119,7 +119,7 @@ In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-mset9#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) - + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter key combo blindly. Press the following buttons on your console in this order: + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A 1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console diff --git a/docs/installing-boot9strap-(mset9-play-store).md b/docs/installing-boot9strap-(mset9-play-store).md index 48f4757cce48b..23e295b05ace3 100644 --- a/docs/installing-boot9strap-(mset9-play-store).md +++ b/docs/installing-boot9strap-(mset9-play-store).md @@ -107,7 +107,7 @@ In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-mset9#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) - + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter key combo blindly. Press the following buttons on your console in this order: + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A 1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console diff --git a/docs/installing-boot9strap-(ntrboot).md b/docs/installing-boot9strap-(ntrboot).md index 2af886d227a88..e2e2d5fd6794e 100644 --- a/docs/installing-boot9strap-(ntrboot).md +++ b/docs/installing-boot9strap-(ntrboot).md @@ -52,8 +52,10 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap - + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ntrboot) -1. Once it is completed, force your console to power off by holding down the power button + + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ntrboot#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A +1. Once it is complete (all seven steps on the bottom screen are green), force your console to power off by holding down the power button + Your console will only boot to the SafeB9SInstaller screen until the next section is completed ### Section IV - Configuring Luma3DS diff --git a/docs/installing-boot9strap-(safecerthax).md b/docs/installing-boot9strap-(safecerthax).md index addf850451b5a..7d4c059a46e86 100644 --- a/docs/installing-boot9strap-(safecerthax).md +++ b/docs/installing-boot9strap-(safecerthax).md @@ -95,8 +95,10 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap - + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-safecerthax) -1. Once it is complete, press (A) to reboot your console + + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-safecerthax#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A +1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console diff --git a/docs/installing-boot9strap-(soundhax).md b/docs/installing-boot9strap-(soundhax).md index 0fb2a6048072f..12225a081b636 100644 --- a/docs/installing-boot9strap-(soundhax).md +++ b/docs/installing-boot9strap-(soundhax).md @@ -89,8 +89,10 @@ In this section, you will launch Soundhax through the Nintendo 3DS Sound app, wh In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap - + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-soundhax) -1. Once it is complete, press (A) to reboot your console + + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-soundhax#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A +1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console diff --git a/docs/installing-boot9strap-(ssloth-browser).md b/docs/installing-boot9strap-(ssloth-browser).md index 50516a9018063..2d70498d1163a 100644 --- a/docs/installing-boot9strap-(ssloth-browser).md +++ b/docs/installing-boot9strap-(ssloth-browser).md @@ -84,8 +84,10 @@ In this section, you will visit the browser exploit webpage, which will use univ In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap - + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ssloth-browser) -1. Once it is complete, press (A) to reboot your console + + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-ssloth-browser#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A +1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console ### Section V - Restoring default proxy diff --git a/docs/installing-boot9strap-(super-skaterhax).md b/docs/installing-boot9strap-(super-skaterhax).md index 2789c7d96dba8..1d209472f57a1 100644 --- a/docs/installing-boot9strap-(super-skaterhax).md +++ b/docs/installing-boot9strap-(super-skaterhax).md @@ -105,8 +105,10 @@ A video detailing these steps is available [here](https://www.youtube.com/watch? In this section, you will install custom firmware onto your console. 1. When prompted, input the key combo given on the top screen to install boot9strap - + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-super-skaterhax) -1. Once it is complete, press (A) to reboot your console + + If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troubleshooting-super-skaterhax#sighaxed-firm-was-not-installed-check-lower-screen-for-more-info) + + If the top screen is blank **and** you see "Crypto Status - all checks passed" on the bottom screen, you will have to enter the key combo blindly. Press the following buttons on your console in this order: + + D-Pad Left, D-Pad Down, D-Pad Right, D-Pad Up, A +1. Once it is complete (all seven steps on the bottom screen are green), press (A) to reboot your console