updates for mbed os 6

Author: farrenv

targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/TARGET_EP_ATLAS/ONBOARD_TELIT_ME310.cpp

@@ -24,7 +24,7 @@
 #include "PinNames.h"
 //#include "mbed.h"
 
-#include "UARTSerial.h"
+#include "BufferedSerial.h"
 #include "ONBOARD_TELIT_ME310.h"
 #include "ThisThread.h"
 #include "CellularLog.h"
@@ -68,11 +68,11 @@ nsapi_error_t ONBOARD_TELIT_ME310::init()
     if (err != NSAPI_ERROR_OK) {
         return err;
     }
-    _at->lock();
+    _at.lock();
 #if DEVICE_SERIAL_FC
-    _at->at_cmd_discard("&K3;&C1;&D0", "");
+    _at.at_cmd_discard("&K3;&C1;&D0", "");
 #else
-    _at->at_cmd_discard("&K0;&C1;&D0", "");
+    _at.at_cmd_discard("&K0;&C1;&D0", "");
 #endif
 
     // AT#QSS=1
@@ -84,7 +84,7 @@ nsapi_error_t ONBOARD_TELIT_ME310::init()
     // <status> values:
     // - 0: SIM not inserted
     // - 1: SIM inserted
-    _at->at_cmd_discard("#QSS", "=1");
+    _at.at_cmd_discard("#QSS", "=1");
 
     // AT#PSNT=1
     // Set command enables unsolicited result code for packet service network type (PSNT)
@@ -94,37 +94,37 @@ nsapi_error_t ONBOARD_TELIT_ME310::init()
     // - 0: GPRS network
     // - 4: LTE network
     // - 5: unknown or not registered
-    _at->at_cmd_discard("#PSNT", "=1");
+    _at.at_cmd_discard("#PSNT", "=1");
 
     // AT+CMER=2
     // Set command enables sending of unsolicited result codes from TA to TE in the case of
     // indicator state changes.
     // Current setting: buffer +CIEV Unsolicited Result Codes in the TA when TA-TE link is
     // reserved (e.g. on-line data mode) and flush them to the TE after
     // reservation; otherwise forward them directly to the TE
-    _at->at_cmd_discard("+CMER", "=2");
+    _at.at_cmd_discard("+CMER", "=2");
 
     // AT+CMEE=2
     // Set command disables the use of result code +CME ERROR: <err> as an indication of an
     // error relating to the +Cxxx command issued. When enabled, device related errors cause the +CME
     // ERROR: <err> final result code instead of the default ERROR final result code. ERROR is returned
     // normally when the error message is related to syntax, invalid parameters or DTE functionality.
     // Current setting: enable and use verbose <err> values
-    _at->at_cmd_discard("+CMEE", "=2");
+    _at.at_cmd_discard("+CMEE", "=2");
 
     // AT#PORTCFG=0
     // Set command allows to connect Service Access Points to the external physical ports giving a great
     // flexibility. Examples of Service Access Points: AT Parser Instance #1, #2, #3, etc..
-    _at->at_cmd_discard("#PORTCFG", "=", "%d", EP_ATLAS_PORT_CONFIGURATION_VARIANT);
+    _at.at_cmd_discard("#PORTCFG", "=", "%d", EP_ATLAS_PORT_CONFIGURATION_VARIANT);
 
     // AT&W&P
     // - AT&W: Execution command stores on profile <n> the complete configuration of the device. If
     //         parameter is omitted, the command has the same behavior of AT&W0.
     // - AT&P: Execution command defines which full profile will be loaded at startup. If parameter
     //         is omitted, the command has the same behavior as AT&P0
-    _at->at_cmd_discard("&W&P", "");
+    _at.at_cmd_discard("&W&P", "");
 
-    return _at->unlock_return_error();
+    return _at.unlock_return_error();
 }
 
 void ONBOARD_TELIT_ME310::press_power_button(int time_ms)
@@ -200,7 +200,7 @@ void ONBOARD_TELIT_ME310::onboard_modem_power_down()
 
 CellularDevice *CellularDevice::get_target_default_instance()
 {
-    static UARTSerial serial(P1_2, P1_1, 115200);
+    static BufferedSerial serial(P1_2, P1_1, 115200);
 #if DEVICE_SERIAL_FC
     if (P0_11 != NC && P1_8 != NC) {
         tr_debug("Modem flow control: RTS %d CTS %d", P0_11, P1_8);