Extend FPGA-Test-Shield SPI master test

Increase coverage of the SPI master FPGA test:
 - check supported frequencies (based on the device capabilities),
 - add support for manual CS handling and test cases,
 - add test cases for rx/tx buffers with different length (based on the device capabilities),
 - add test case for one symbol transmission,
 - add test cases for different symbol sizes (based on the device capabilities).

Author: mprse

TESTS/mbed_hal_fpga_ci_test_shield/spi/main.cpp

@@ -35,18 +35,31 @@
 
 using namespace utest::v1;
 
-
 typedef enum {
     TRANSFER_SPI_MASTER_WRITE_SYNC,
     TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC,
     TRANSFER_SPI_MASTER_TRANSFER_ASYNC
 } transfer_type_t;
 
-#define FREQ_500_KHZ  500000
-#define FREQ_1_MHZ    1000000
-#define FREQ_2_MHZ    2000000
+typedef enum {
+    BUFFERS_COMMON,     // common case rx/tx buffers are defined and have the same size
+    BUFFERS_TX_GT_RX,   // tx buffer length is greater than rx buffer length
+    BUFFERS_TX_LT_RX,   // tx buffer length is less than rx buffer length
+    BUFFERS_TX_ONE_SYM, // one symbol only is transmitted in both directions
+} test_buffers_t;
+
+#define FREQ_200_KHZ  (200000ull)
+#define FREQ_500_KHZ  (500000)
+#define FREQ_1_MHZ    (1000000)
+#define FREQ_2_MHZ    (2000000)
+#define FREQ_10_MHZ   (10000000ull)
 #define FREQ_MIN      ((uint32_t)0)
 #define FREQ_MAX      ((uint32_t)-1)
+#define FILL_SYM      (0xF5F5F5F5)
+#define DUMMY_SYM     (0xD5D5D5D5)
+
+#define SS_ASSERT     (0)
+#define SS_DEASSERT   (!(SS_ASSERT))
 
 #define TEST_CAPABILITY_BIT(MASK, CAP) ((1 << CAP) & (MASK))
 
@@ -67,75 +80,166 @@ void spi_async_handler()
 }
 #endif
 
+/* Function finds SS pin for manual SS handling. */
+static PinName find_ss_pin(PinName mosi, PinName miso, PinName sclk)
+{
+    const PinList *ff_pins_list = pinmap_ff_default_pins();
+    const PinList *restricted_pins_list = pinmap_restricted_pins();
+    uint32_t cs_pin_idx;
+
+    for (cs_pin_idx = 0; cs_pin_idx < ff_pins_list->count; cs_pin_idx++) {
+        if (ff_pins_list->pins[cs_pin_idx] == mosi ||
+                ff_pins_list->pins[cs_pin_idx] == miso ||
+                ff_pins_list->pins[cs_pin_idx] == sclk) {
+            continue;
+        }
+
+        bool restricted_pin = false;
+        for (uint32_t i = 0; i < restricted_pins_list->count ; i++) {
+            if (ff_pins_list->pins[cs_pin_idx] == restricted_pins_list->pins[i]) {
+                restricted_pin = true;
+            }
+        }
+
+        if (restricted_pin) {
+            continue;
+        } else {
+            break;
+        }
+    }
+
+    PinName ssel = (cs_pin_idx == ff_pins_list->count ? NC : ff_pins_list->pins[cs_pin_idx]);
+
+    TEST_ASSERT_MESSAGE(ssel != NC, "Unable to find pin for Chip Select");
+
+    return ssel;
+}
+
+/* Function handles ss line if ss is specified. */
+static void handle_ss(DigitalOut *ss, bool select)
+{
+    if (ss) {
+        if (select) {
+            *ss = SS_ASSERT;
+        } else {
+            *ss = SS_DEASSERT;
+        }
+    }
+}
+
 /* Auxiliary function to check platform capabilities against test case. */
-static bool check_capabilities(const spi_capabilities_t *capabilities, SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency)
+static bool check_capabilities(const spi_capabilities_t *capabilities, SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency, test_buffers_t test_buffers)
 {
     // Symbol size
     if (!TEST_CAPABILITY_BIT(capabilities->word_length, (sym_size - 1))) {
-        utest_printf("\n<Specified symbol size is not supported on this platform> skipped ");
+        utest_printf("\n<Specified symbol size is not supported on this platform> skipped. ");
         return false;
     }
 
     // SPI clock mode
     if (!TEST_CAPABILITY_BIT(capabilities->clk_modes, spi_mode)) {
-        utest_printf("\n<Specified spi clock mode is not supported on this platform> skipped");
+        utest_printf("\n<Specified spi clock mode is not supported on this platform> skipped. ");
         return false;
     }
 
     // Frequency
     if (frequency != FREQ_MAX && frequency != FREQ_MIN && frequency < capabilities->minimum_frequency && frequency > capabilities->maximum_frequency) {
-        utest_printf("\n<Specified frequency is not supported on this platform> skipped ");
+        utest_printf("\n<Specified frequency is not supported on this platform> skipped. ");
         return false;
     }
 
     // Async mode
     if (transfer_type == TRANSFER_SPI_MASTER_TRANSFER_ASYNC && capabilities->async_mode == false) {
-        utest_printf("\n<Async mode is not supported on this platform> skipped ");
+        utest_printf("\n<Async mode is not supported on this platform> skipped. ");
+        return false;
+    }
+
+    if ((test_buffers == BUFFERS_TX_GT_RX || test_buffers == BUFFERS_TX_LT_RX) && capabilities->tx_rx_buffers_equal_length == true) {
+        utest_printf("\n<RX length != TX length is not supported on this platform> skipped. ");
         return false;
     }
 
     return true;
 }
 
-void fpga_spi_test_init_free(PinName mosi, PinName miso, PinName sclk, PinName ssel)
+void fpga_spi_test_init_free(PinName mosi, PinName miso, PinName sclk)
 {
-    spi_init(&spi, mosi, miso, sclk, ssel);
-    spi_format(&spi, 8, SPITester::Mode0, 0);
+    spi_init(&spi, mosi, miso, sclk, NC);
+    spi_format(&spi, 8, 0, 0);
     spi_frequency(&spi, 1000000);
     spi_free(&spi);
 }
 
-void fpga_spi_test_common(PinName mosi, PinName miso, PinName sclk, PinName ssel, SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency, bool init_direct)
+void fpga_spi_test_common(PinName mosi, PinName miso, PinName sclk, PinName ssel, SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency, test_buffers_t test_buffers, bool auto_ss, bool init_direct)
 {
     spi_capabilities_t capabilities;
-
+    uint32_t freq = frequency;
+    uint32_t tx_cnt = TRANSFER_COUNT;
+    uint32_t rx_cnt = TRANSFER_COUNT;
+    uint8_t fill_symbol = (uint8_t)FILL_SYM;
+    PinName ss_pin = (auto_ss ? ssel : NC);
+    DigitalOut *ss = NULL;
 
     spi_get_capabilities(ssel, false, &capabilities);
 
-    if (check_capabilities(&capabilities, spi_mode, sym_size, transfer_type, frequency) == false) {
+    if (check_capabilities(&capabilities, spi_mode, sym_size, transfer_type, frequency, test_buffers) == false) {
         return;
     }
 
     uint32_t sym_mask = ((1 << sym_size) - 1);
 
+    switch (frequency) {
+        case (FREQ_MIN):
+            freq = capabilities.minimum_frequency;
+            break;
+        case (FREQ_MAX):
+            freq = capabilities.maximum_frequency;
+            break;
+        default:
+            break;
+    }
+
+    switch (test_buffers) {
+        case (BUFFERS_COMMON):
+            // nothing to change
+            break;
+        case (BUFFERS_TX_GT_RX):
+            rx_cnt /= 2;
+            break;
+        case (BUFFERS_TX_LT_RX):
+            tx_cnt /= 2;
+            break;
+        case (BUFFERS_TX_ONE_SYM):
+            tx_cnt = 1;
+            rx_cnt = 1;
+            break;
+
+        default:
+            break;
+    }
+
     // Remap pins for test
     tester.reset();
     tester.pin_map_set(mosi, MbedTester::LogicalPinSPIMosi);
     tester.pin_map_set(miso, MbedTester::LogicalPinSPIMiso);
     tester.pin_map_set(sclk, MbedTester::LogicalPinSPISclk);
     tester.pin_map_set(ssel, MbedTester::LogicalPinSPISsel);
 
-    // Initialize mbed SPI pins
+    // Manually handle SS pin
+    if (!auto_ss) {
+        ss = new DigitalOut(ssel);
+        *ss = SS_DEASSERT;
+    }
 
     if (init_direct) {
-        const spi_pinmap_t pinmap = get_spi_pinmap(mosi, miso, sclk, ssel);
+        const spi_pinmap_t pinmap = get_spi_pinmap(mosi, miso, sclk, ss_pin);
         spi_init_direct(&spi, &pinmap);
     } else {
-        spi_init(&spi, mosi, miso, sclk, ssel);
+        spi_init(&spi, mosi, miso, sclk, ss_pin);
     }
 
     spi_format(&spi, sym_size, spi_mode, 0);
-    spi_frequency(&spi, frequency);
+    spi_frequency(&spi, freq);
 
     // Configure spi_slave module
     tester.set_mode(spi_mode);
@@ -147,34 +251,63 @@ void fpga_spi_test_common(PinName mosi, PinName miso, PinName sclk, PinName ssel
     tester.select_peripheral(SPITester::PeripheralSPI);
 
     uint32_t checksum = 0;
+    uint32_t sym_count = TRANSFER_COUNT;
     int result = 0;
     uint8_t tx_buf[TRANSFER_COUNT] = {0};
     uint8_t rx_buf[TRANSFER_COUNT] = {0};
 
     // Send and receive test data
     switch (transfer_type) {
         case TRANSFER_SPI_MASTER_WRITE_SYNC:
+            handle_ss(ss, true);
             for (int i = 0; i < TRANSFER_COUNT; i++) {
                 uint32_t data = spi_master_write(&spi, (0 - i) & sym_mask);
                 TEST_ASSERT_EQUAL(i & sym_mask, data);
-
                 checksum += (0 - i) & sym_mask;
             }
+            handle_ss(ss, false);
             break;
 
         case TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC:
             for (int i = 0; i < TRANSFER_COUNT; i++) {
                 tx_buf[i] = (0 - i) & sym_mask;
-                checksum += (0 - i) & sym_mask;
-                rx_buf[i] = 0xAA;
+                rx_buf[i] = 0xFF;
+
+                switch (test_buffers) {
+                    case (BUFFERS_COMMON):
+                    case (BUFFERS_TX_GT_RX):
+                        checksum += ((0 - i) & sym_mask);
+                        break;
+                    case (BUFFERS_TX_LT_RX):
+                        if (i < tx_cnt) {
+                            checksum += ((0 - i) & sym_mask);
+                        } else {
+                            checksum += (fill_symbol & sym_mask);
+                        }
+                        break;
+                    case (BUFFERS_TX_ONE_SYM):
+                        tx_buf[0] = 0xAA;
+                        checksum = 0xAA;
+                        sym_count = 1;
+                        break;
+                    default:
+                        break;
+                }
             }
 
-            result = spi_master_block_write(&spi, (const char *)tx_buf, TRANSFER_COUNT, (char *)rx_buf, TRANSFER_COUNT, 0xF5);
+            handle_ss(ss, true);
+            result = spi_master_block_write(&spi, (const char *)tx_buf, tx_cnt, (char *)rx_buf, rx_cnt, 0xF5);
+            handle_ss(ss, false);
 
-            for (int i = 0; i < TRANSFER_COUNT; i++) {
+            for (int i = 0; i < rx_cnt; i++) {
                 TEST_ASSERT_EQUAL(i & sym_mask, rx_buf[i]);
             }
-            TEST_ASSERT_EQUAL(TRANSFER_COUNT, result);
+
+            for (int i = rx_cnt; i < TRANSFER_COUNT; i++) {
+                TEST_ASSERT_EQUAL(0xFF, rx_buf[i]);
+            }
+
+            TEST_ASSERT_EQUAL(sym_count, result);
             break;
 
 #if DEVICE_SPI_ASYNCH
@@ -187,58 +320,76 @@ void fpga_spi_test_common(PinName mosi, PinName miso, PinName sclk, PinName ssel
 
             async_trasfer_done = false;
 
+            handle_ss(ss, true);
             spi_master_transfer(&spi, tx_buf, TRANSFER_COUNT, rx_buf, TRANSFER_COUNT, 8, (uint32_t)spi_async_handler, SPI_EVENT_COMPLETE, DMA_USAGE_NEVER);
+
             while (!async_trasfer_done);
+            handle_ss(ss, false);
 
             for (int i = 0; i < TRANSFER_COUNT; i++) {
                 TEST_ASSERT_EQUAL(i & sym_mask, rx_buf[i]);
             }
 
             break;
 #endif
-
         default:
             TEST_ASSERT_MESSAGE(0, "Unsupported transfer type.");
             break;
 
     }
 
     // Verify that the transfer was successful
-    TEST_ASSERT_EQUAL(TRANSFER_COUNT, tester.get_transfer_count());
+    TEST_ASSERT_EQUAL(sym_count, tester.get_transfer_count());
     TEST_ASSERT_EQUAL(checksum, tester.get_receive_checksum());
 
     spi_free(&spi);
     tester.reset();
 }
 
-template<SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency, bool init_direct>
+template<SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency, test_buffers_t test_buffers, bool auto_ss, bool init_direct>
 void fpga_spi_test_common(PinName mosi, PinName miso, PinName sclk, PinName ssel)
 {
-    fpga_spi_test_common(mosi, miso, sclk, ssel, spi_mode, sym_size, transfer_type, frequency, init_direct);
+    fpga_spi_test_common(mosi, miso, sclk, ssel, spi_mode, sym_size, transfer_type, frequency, test_buffers, auto_ss, init_direct);
+}
+
+template<SPITester::SpiMode spi_mode, uint32_t sym_size, transfer_type_t transfer_type, uint32_t frequency, test_buffers_t test_buffers, bool auto_ss, bool init_direct>
+void fpga_spi_test_common_no_ss(PinName mosi, PinName miso, PinName sclk)
+{
+    PinName ssel = find_ss_pin(mosi, miso, sclk);
+
+    fpga_spi_test_common(mosi, miso, sclk, ssel, spi_mode, sym_size, transfer_type, frequency, test_buffers, auto_ss, init_direct);
 }
 
 Case cases[] = {
     // This will be run for all pins
-    Case("SPI - init/free test all pins", all_ports<SPIPort, DefaultFormFactor, fpga_spi_test_init_free>),
+    Case("SPI - init/free test all pins", all_ports<SPINoCSPort, DefaultFormFactor, fpga_spi_test_init_free>),
 
     // This will be run for all peripherals
-    Case("SPI - basic test", all_peripherals<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, false> >),
-    Case("SPI - basic test (direct init)", all_peripherals<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, true> >),
+    Case("SPI - basic test", all_peripherals<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - basic test (direct init)", all_peripherals<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, true> >),
 
     // This will be run for single pin configuration
-    Case("SPI - mode testing (MODE_1)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode1, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, false> >),
-    Case("SPI - mode testing (MODE_2)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode2, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, false> >),
-    Case("SPI - mode testing (MODE_3)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode3, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, false> >),
-
-    Case("SPI - symbol size testing (16)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 16, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, false> >),
-
-    Case("SPI - frequency testing (500 kHz)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_500_KHZ, false> >),
-    Case("SPI - frequency testing (2 MHz)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_2_MHZ, false> >),
-
-    Case("SPI - block write", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC, FREQ_1_MHZ, false> >),
-
+    Case("SPI - mode testing (MODE_1)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode1, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - mode testing (MODE_2)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode2, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - mode testing (MODE_3)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode3, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - symbol size testing (4)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 4, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - symbol size testing (12)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 12, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - symbol size testing (16)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 16, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - symbol size testing (24)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 24, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - symbol size testing (32)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 32, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - buffers tx > rx", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_TX_GT_RX, false, false> >),
+    Case("SPI - buffers tx < rx", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_TX_LT_RX, false, false> >),
+    Case("SPI - frequency testing (500 kHz)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_500_KHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - frequency testing (2 MHz)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_2_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - frequency testing (capabilities min)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_MIN, BUFFERS_COMMON, false, false> >),
+    Case("SPI - frequency testing (capabilities max)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_MAX, BUFFERS_COMMON, false, false> >),
+    Case("SPI - block write", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - block write(one sym)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_TX_ONE_SYM, false, false> >),
+    Case("SPI - hardware ss handling", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, true, false> >),
+    Case("SPI - hardware ss handling(block)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_BLOCK_WRITE_SYNC, FREQ_1_MHZ, BUFFERS_COMMON, true, false> >),
 #if DEVICE_SPI_ASYNCH
-    Case("SPI - async mode", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_TRANSFER_ASYNC, FREQ_1_MHZ, false> >)
+    Case("SPI - async mode (sw ss)", one_peripheral<SPINoCSPort, DefaultFormFactor, fpga_spi_test_common_no_ss<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_TRANSFER_ASYNC, FREQ_1_MHZ, BUFFERS_COMMON, false, false> >),
+    Case("SPI - async mode (hw ss)", one_peripheral<SPIPort, DefaultFormFactor, fpga_spi_test_common<SPITester::Mode0, 8, TRANSFER_SPI_MASTER_TRANSFER_ASYNC, FREQ_1_MHZ, BUFFERS_COMMON, true, false> >)
 #endif
 };