Update to v2.1.0

- Migrate ThreadX project to freertos project
- Upgrade to STEdgeAI 2.2.0

Author: GHORTESSTM

Binaries/aed_bm.bin

@@ -1,21 +1,24 @@
-#!\bin\bash
-
-pathCubeIde="<Path_to_cube ide>"
-pathProg="<Path_to_cube_programmer_plug_in>/tools/bin"
-el=$pathCubeIde$pathProg"/ExternalLoader/MX66UW1G45G_STM32N6570-DK.stldr"
-prog=$pathCubeIde$pathProg"/STM32_Programmer_CLI.exe"
+#!/bin/bash
 
 bin=$1"_"$2".bin"
 fsbl="fsbl_fw_lrun_v1.2.0.bin"
 weight=$1"_weights.bin"
+external_loader="$(dirname "$(which STM32_Programmer_CLI)")/ExternalLoader/MX66UW1G45G_STM32N6570-DK.stldr"
 
-echo "please connect the board and switch BOOT1 to Rigth position" 
+echo "please connect the board and switch BOOT1 to Rigth position"
 echo "when done,  press a key to continue ..."
 read -n 1 -s
 echo "flashing the application "$bin" with weigth "$weight
 
-$prog -c port=swd mode=HOTPLUG ap=1 --extload $el -w $fsbl 0x70000000
-$prog -c port=swd mode=HOTPLUG ap=1 --extload $el -w $bin 0x70100000
-$prog -c port=swd mode=HOTPLUG ap=1 --extload $el -w $weight 0x70180000
+set -x
+
+STM32_Programmer_CLI -c port=swd mode=HOTPLUG ap=1 --extload $external_loader -w $fsbl 0x70000000
+STM32_Programmer_CLI -c port=swd mode=HOTPLUG ap=1 --extload $external_loader -w $bin 0x70100000
+STM32_Programmer_CLI -c port=swd mode=HOTPLUG ap=1 --extload $external_loader -w $weight 0x70180000
 
-echo "please power cycle the board after switching BOOT1 to Left position" 
+set +x
+
+echo "please switch BOOT1 to Left position and then power cycle the board"
+echo "when done, press a key to continue ..."
+read -n 1 -s
+echo "Flashing done"