Template Outputs

A hairstyle and a way of maintaining and upgrading Haskell projects.

Make projects from packages, versions¹ and commits².

What is a Project?

Updo is good for project packages, constraints¹, source repository packages² and stackage resolver³. More than this can be added into a project template snippet for free-form content.

Goals

Map a single set of packages, constraints and source repository packages to projects for cabal and stack.
Minimize the effort of upgrading constraints, source repository packages and GHC versions.

We do this with configuration in .dhall files, makefiles and dhall text templates. We also have some simple Haskell scripts for operations not possible in Dhall like sorting a List Text⁴.

Template Outputs

We generate projects from the configured inputs using templates. With the dhall text command we're able to mirror to both stack and cabal projects using text templates. See templates for more.

We provide one stack template dhall2stack. The dhall2cabal template for cabal is so similar that the generated outputs can be compared using file diff tooling. However, we prefer the dhall2config template because it retains package groups that can bring order to an upgrade if the cabal solving order is roughly captured by package group ordering.

We provide one level of nesting for grouping packages together as inputs. Groups are preserved or flattened depending on the template.

dhall2stack - Stack projects cannot import so necessarily must lose the grouping and contain the list of packages.
dhall2cabal - This template lists packages within the cabal project.
dhall2config - When generating the cabal project we keep package groups, generating the same tree structure but replacing the leaves. From each group-name.dhall we generate a group-name.config file.

It is nice to be able to look at packages both grouped and as one sorted list. Find the flat sorted lists of packages used by some templates in the .updo folder.

.updo
├── pkgs-sorted.dhall        ▨ List Text
└── pkgs-upgrade-done.dhall  ▨ List Text

If you don't want groups then please put all packages in the one group.

Maintaining a Project

Maintaining a project involves configuring or reconfiguring inputs and then using make to generate the projects. What do we want to configure? We don't need much:

A stackage resolver³.
A list of constraints¹.
A list of source repository packages, for unpublished² packages or for unpublished versions of packages.
A list of packages.

All configuration goes into ./project-dhall (where . is the root folder for your Haskell project) except for the cabal.config that we'll likely need to download from stackage and modify. Save this file as project-stackage/lts-m.n.config using the exact resolver name.

project-stackage
└── lts-m.n.config

Any == constraint that gives the cabal solver impossible constraints can then be commented out by prepending with --. If there are no impossible constraints then the stackage resolver can be imported directly from https://stackage.org.

< StackageWeb | StackageLocal >

The dhall2cabal and dhall2config text templates import stackage constraints from one of the following locations by invoking updo/text-templates/import-stackage.dhall:

StackageWeb: "import: https://stackage.org/resolver/cabal.config"
StackageLocal: "import: ./project-stackage/resolver.config"

For each ghc-x.y.z compiler version, create this set of inputs and templates:

project-dhall
└── ghc-x.y.z
    ├── constraints.dhall      ▨ List { dep : Text, ver : Text }
    ├── deps-external.dhall    ▨ List { loc : Text, tag : Text, sub : List Text }
    ├── deps-internal.dhall    ▨ List { loc : Text, tag : Text, sub : List Text }
    ├── forks-external.dhall   ▨ List { loc : Text, tag : Text, sub : List Text }
    ├── forks-internal.dhall   ▨ List { loc : Text, tag : Text, sub : List Text }
    └── text-templates
        ├── dhall2cabal.dhall  ▨ template for ghc-x.y.z.dhall2cabal.project
        ├── dhall2config.dhall ▨ template for ghc-x.y.z.dhall2config.project
        ├── dhall2stack.dhall  ▨ template for ghc-x.y.z.dhall2stack.yaml
        └── stacksnippet.dhall ▨ anything for ghc-x.y.z.dhall2stack.yaml

All of the inputs can be omitted, any of:

project-dhall
└── ghc-x.y.z
    ├── constraints.dhall
    ├── deps-external.dhall
    ├── deps-internal.dhall
    ├── forks-external.dhall
    └── forks-internal.dhall

Anything in stacksnippet.dhall gets added to the top of the generated stack project⁵. The rest of the files are inputs.

1. Stackage Resolver and Constraints

The stackage resolver is able to provide us with a list of packages that work together for both stack and cabal. Any other dependencies as constraints or source packages are either not found on stackage or are different versions.

By specifying a resolver with stack we get a list of exact == versions for packages published to stackage. Stackage also publishes a cabal.config file that has these package versions as cabal constraints. As cabal constraints are additive, in practice importing directly from stackage often leads to conflicts between stackage's constraints and the project's own constraints and for that reason we'll usually have to download the cabal.config from stackage⁶ and comment out lines that are conflicted.

We don't expect any packages to impose constraints on their dependencies at the package level, in their .cabal files, but if they do then these constraints must fit with constraints at the project level.

2. Constraints

In constraints¹ put published packages that you want to use that are not on stackage or if they are on stackage where you want to use a different version.

[ { dep = "diagrams-postscript", ver = "1.5" }
, { dep = "diagrams-svg", ver = "1.4.3" }
]

The type of constraints is a list of records with dependency and version fields:

List { dep : Text, ver : Text }

The version can include a @rev:... or @sha256:... revision suffix⁷.

3. Source Repository Packages

There are various reasons to depend on source packages and forks of source packages; to keep a mirror within your organization, to add fixes that haven't been upstreamed yet, or to pick up a fix someone else has made but hasn't yet been merged upstream, released and published.

project-dhall
└── ghc-x.y.z
    ├── deps-external.dhall    ▨ List { loc : Text, tag : Text, sub : List Text }
    ├── deps-internal.dhall    ▨ List { loc : Text, tag : Text, sub : List Text }
    ├── forks-external.dhall   ▨ List { loc : Text, tag : Text, sub : List Text }
    └── forks-internal.dhall   ▨ List { loc : Text, tag : Text, sub : List Text }

The type of these files are all the same. They contain a list of records with fields for location, tag (commit SHA) and subdirectories:

List { loc : Text, tag : Text, sub : List Text }

Any empty sub field must be type annotated like this [] : List Text. Each source repository package record will bring in one dependency or as many as there are sub fields.

These source repository *.dhall files are for original work from your organisation (internal) and from third parties (external) and for internal and external forks. If using the empty list in any one of these files then use an explicit type annotation:

[] : List { loc : Text, tag : Text, sub : List Text }

4. Package Groups

In the pkgs folder, create one or more groups for related packages.

project-dhall
├── ghc-x.y.z
├── pkgs
│   ├── db.dhall      ▨ List Text
│   ├── server.dhall  ▨ List Text
│   └── tools.dhall   ▨ List Text
└── pkg-groups.dhall  ▨ List Text

The contents of each group is a List Text of relative paths to folders containing package .cabal files.

-- ./project-dhall/pkgs/tools.dhall
[ "tool/linter/"
, "tool/formatter/"
]

List the package groups in pkg-groups.dhall⁸. A good order to use is the order of cabal constraint solving that you may witness when upgrading a project and seeing solving failures.

-- ./project-dhall/pkg-groups.dhall
[ "tools"
, "db"
, "server"
]

This gives you control of the imports in the generated ./project-cabal/pkgs.config, itself imported into ghc-x.y.z.dhall2config.project:

Use CABAL_RELATIVITY=ImportRelative to be import-compatible with cabal-3.10.

-- ./project-cabal/pkgs.config
import: ./pkgs/tools.config
import: ./pkgs/db.config
import: ./pkgs/server.config

The default of CABAL_RELATIVITY=ProjectRelative is import-compatible with cabal-3.8.

-- ./project-cabal/pkgs.config
import: ./project-cabal/pkgs/tools.config
import: ./project-cabal/pkgs/db.config
import: ./project-cabal/pkgs/server.config

-- ./ghc-x.y.z.dhall2config.project
import: ./project-stackage/lts-m.n.config

import: ./project-cabal/pkgs.config

import: ./project-cabal/ghc-x.y.z/constraints.config
import: ./project-cabal/ghc-x.y.z/deps-external.config
import: ./project-cabal/ghc-x.y.z/deps-internal.config
import: ./project-cabal/ghc-x.y.z/forks-external.config
import: ./project-cabal/ghc-x.y.z/forks-internal.config

Upgrading a Project

GHC Upgrade

For a GHC compiler upgrade, add another folder to project-dhall for the upgrade from ghc-u.v.w to ghc-x.y.z:

project-dhall
├── ghc-u.v.w
├── ghc-x.y.z
├── pkgs
├── pkg-groups.dhall        ▨ List Text
└── pkgs-upgrade-todo.dhall ▨ List Text

At the start of a GHC upgrade put all packages into project-dhall/pkgs-upgrade-todo.dhall. As the upgrade progresses remove packages from this list as you work on them.

Constraint Upgrade

For a dependency version upgrade, add or change an entry in constraints.dhall and if that dependency is on stackage for the resolver we're using and if the version there differs then comment out that entry in the downloaded project-stackage/resolver-name.config file to avoid impossible constraint solving conflicts with cabal.

Source Repository Upgrade

For a source repository upgrade, bump the tag field if picking up a newer version.

If the tag you were on has been superseded by a published version then delete the entry and add a constraint unless the published version is already a match in the downloaded cabal.config file from stackage.

Adding a Fork

If you are forking then you'll want to add a record to fork-internal.dhall and then:

If forking a stackage package: comment out the entry in the downloaded cabal.config
If forking a hackage package: delete the matching entry in constraints.dhall

Using someone else's fork is the same except add the record to fork-external.dhall.

Unforking goes the other way, remove the fork-*.dhall entry and either fallback to the stackage version or another version for which you'll add an entry in constraints.dhall.

Getting Started

Dhall is a prerequisite. Updo can bootstrap itself as a makefile recipe in project-files.mk.

Bootstrap from Hackage

UPDO_VERSION ?= 1.0.0
HACKAGE := http://hackage.haskell.org/package
UPDO_URL := ${HACKAGE}/updo-${UPDO_VERSION}/updo-${UPDO_VERSION}.tar.gz

When opting for the scripts:

updo/Makefile:
⇥ rm -rf updo
⇥ curl -sSL ${UPDO_URL} | tar -xz
⇥ mv updo-* updo
⇥ chmod +x $$(grep -RIl '^#!' updo)

When opting to install the included executables:

updo/Makefile:
⇥ rm -rf updo
⇥ curl -sSL ${UPDO_URL} | tar -xz
⇥ cd updo-${UPDO_VERSION}
⇥ stack install
⇥ cd -
⇥ mv updo-* updo

Both cabal get and stack unpack can also unpack package sources from Hackage.

Bootstrap from Source

Updo can bootstrap itself from a revision or branch too.

From a revision:

UPDO_VERSION ?= 4a8359f4e5d8cad61f35bea9d0a8f04477829ca1
UPDO_URL := https://github.com/cabalism/updo/archive/${UPDO_VERSION}.tar.gz

updo/Makefile:
⇥ rm -rf updo
⇥ curl -sSL ${UPDO_URL} | tar -xz
⇥ mv updo-* updo
⇥ chmod +x $$(grep -RIl '^#!' updo)

From a branch:

updo/Makefile:
⇥ rm -rf updo
⇥ git clone --depth=1 --branch main [email protected]:cabalism/updo
⇥ chmod +x $$(grep -RIl '^#!' updo)

Make Targets

In the root of your project, add two files.

.
├── project-files.mk
└── project-versions.mk

In project-versions.mk set variables for GHC and STACKAGE.

GHC_VERSION := u.v.w
GHC_UPGRADE := x.y.z
STACKAGE_VERSION := lts-j.k
STACKAGE_UPGRADE := lts-m.n

Here is a basic set up for project-files.mk:

include project-versions.mk
include updo/Makefile

Canonical Targets

We consider the following as canonical project names and no target is required to build them (they're built by the default all target):

$ make -f project-files.mk

stack.yaml
cabal.project
stack.upgrade.yaml
cabal.upgrade.project

We use CABAL_VIA and STACK_VIA makefile variables to decide which ghc-x.y.z prefixed projects will be copied to the default project names (cabal.project and stack.yaml). This way, Updo will create a single pair of projects for one version of GHC.

GHC-Prefixed Targets

We can build ghc-x.y.z projects explicitly:

$ make -f project-files.mk ghc-x.y.z.dhall2config.project
$ make -f project-files.mk ghc-x.y.z.dhall2cabal.project
$ make -f project-files.mk ghc-x.y.z.dhall2stack.yaml

Modified Time Travel

Be careful with modified time that make relies on. If you hand-modify a target so that it is newer than a prerequisite then make will not use its recipe to build the target. This is easy to do inadvertently with a git GUI tool when discarding changes or by doing a git restore <project-name>. As git advances the modified time, this is effectively the same as touch <project-name>. To recover from this situation, either;

Remove the target with rm <project-name>.
Run make with its --always-make flag but be careful with this if bootstrapping updo itself within the makefile.

Lock Files

For stack, the project and its lock are separate targets (.yaml and .yaml.lock).

$ make -f project-files.mk ghc-x.y.z.dhall2stack.yaml
dhall text --file project-dhall/ghc-x.y.z/project-stack.dhall > ghc-x.y.z.dhall2stack.yaml

$ make -f project-files.mk ghc-x.y.z.dhall2stack.yaml.lock
stack build --dry-run --stack-yaml ghc-x.y.z.dhall2stack.yaml

We don't provide a make target for cabal .project.freeze files, relying instead on a combination of constraints, those in the cabal.config downloaded from stackage and those we add ourselves to constraints.dhall. If you do want to freeze anyway there's a cabal command to generate a freeze file.

$ make -f project-files.mk ghc-x.y.z.dhall2cabal.project
dhall text --file project-dhall/ghc-x.y.z/project-cabal.dhall > ghc-x.y.z.dhall2cabal.project

Clean GHC-Prefixed Projects

There's a make target to remove all ghc-x.y.z prefixed projects:

$ make -f project-files.mk clean
rm -f ghc-*.stack.* ghc-*.dhall2config.* ghc-*.dhall2cabal.* ghc-*.dhall2stack.*
ghc-*.stack2cabal.* ghc-*.cabal2stack.* ghc-*.dhall2yaml2stack.* ghc-*.sha256map.nix

GHC-Prefixed Projects as Temporary

To treat ghc-x.y.z prefixed files as temporary, add lines like these to project-files.mk:

.INTERMEDIATE: ghc-$(GHC_VERSION).dhall2config.project
.INTERMEDIATE: ghc-$(GHC_VERSION).dhall2cabal.project
.INTERMEDIATE: ghc-$(GHC_VERSION).dhall2stack.yaml
.INTERMEDIATE: ghc-$(GHC_VERSION).sha256map.nix

SHA256 Map Generation Method

With this snippet from project-files.mk, we can switch between two methods of generating ghc-x.y.z.sha256map.nix.

# How to generate project-nix/ghc-$(GHC_VERSION)/sha256map.nix?
# This is copied from ghc-$(GHC_VERSION).sha256map.nix.
#  - false to generate from *.dhall inputs via sha256map.hs.
#  - true to generate from stack.yaml via sha256map.py.
SHA256MAP_VIA_PYTHON ?= false

# If true, generate the sha256map from the stack.yaml with python,
# overriding the recipe for this target.
ifeq ($(SHA256MAP_VIA_PYTHON), true)
ghc-$(GHC_VERSION).sha256map.nix: stack.yaml
⇥ updo/project-nix/sha256map.py <$^ >$@
endif

The default is to use the sha256map.hs script to generate it⁹:

$ make -f project-files.mk ghc-x.y.z.sha256map.nix
echo \
  '[./project-dhall/ghc-x.y.z/deps-external.dhall
  , ./project-dhall/ghc-x.y.z/deps-internal.dhall
  , ./project-dhall/ghc-x.y.z/forks-external.dhall
  , ./project-dhall/ghc-x.y.z/forks-internal.dhall
  , ([] : List {loc : Text, tag : Text, sub : List Text})
  ]' \
  | ./updo/project-nix/sha256map.hs > ghc-x.y.z.sha256map.nix

To use the sha256map.py script instead that is much slower:

$ SHA256MAP_VIA_PYTHON=true \
  make -f project-files.mk project-nix/ghc-x.y.z/sha256map.nix
updo/project-nix/sha256map.py <stack.yaml >ghc-x.y.z.sha256map.nix
mkdir -p project-nix/ghc-x.y.z && cp ghc-x.y.z.sha256map.nix project-nix/ghc-x.y.z/sha256map.nix
rm ghc-x.y.z.sha256map.nix

You can read more about Updo Nix and its use with haskell.nix.

Installed Exes or Scripts

To use the executables of Updo's own package, by default, instead of its scripts, add these lines to project-files.mk:

SHA256MAP_HS_EXE ?= true
PKG_GROUPS_HS_EXE ?= true
PKGS_SORTED_HS_EXE ?= true
PKGS_UPGRADE_DONE_HS_EXE ?= true

Why Dhall for Configuration?

Dhall has excellent imports and is an intentionally limited typed programming language. We use dhall's text command to write cabal and stack projects using dhall text templating.

The dhall executable comes with a format command¹⁰. This helps in the maintenance of the various .dhall files.

An example of the limits of the language we encountered in Updo is not being able to compare anything but Natural values. Sorting something like List Text is not possible but there is great interop with Haskell so this can be done over there as we do with scripts.

Acknowledgements

I already knew Dhall well from maintaining hpack-dhall. Thanks Simon Hengel for suggesting I take over its maintenance.

FP Complete is the corporate sponsor of this tooling. Thanks to my collegues; Daniel Herrera Rendón for first seeing this could work, Neil Mayhew for makefile tips and tricks, Abel Sen for careful reviews and thoughtful suggestions and Eduardo Lemos Rocha for advocacy and enthusiasm.

Please contact me for any questions, problems, suggestions or the like. Maintenance of Updo will be coming from me and not FP Complete.

Updo grew to fill a need after every other way I could find to maintain projects was unsatisfactory for the specific problem I had, herding hundreds of packages and their dependencies into buildable projects over two compiler versions for both cabal and stack. The more I use it, the more I love it as a fast, simple and appropriate solution for maintaining Haskell projects.

Thanks FP Complete.

A dependency version equality constraint. ↩ ↩² ↩³ ↩⁴
A package not published to hackage or stackage. ↩ ↩² ↩³
For cabal, the cabal.config will have to be downloaded to project-stackage/resolver.config and then edited to comment out constraints that would otherwise lead to impossible to solve conflicting constraints because cabal constraints are additive and cannot be overridden. ↩ ↩²
Dhall can only sort List Natural. ↩
Anything in stacksnippet.dhall will be used by dhall2yaml2stack too and is put into a base.yaml, the topmost fragment when stitching together fragments. ↩
The URL path to download this file from is /resolver/cabal.config. The latest nightly is always at https://www.stackage.org/nightly/cabal.config. ↩
Cabal's revision feature is not yet implemented so these suffixes are stripped for Cabal projects. ↩
Dhall can't do arbitrary IO like reading files from a folder. ↩
Using ghc-x.y.z and lts-m.n in the example output, not the actual GHC version or resolver. ↩
Formatting is also available with the Dhall LSP Server. ↩

Name		Name	Last commit message	Last commit date
Latest commit History 208 Commits
.github/workflows		.github/workflows
alternatives		alternatives
empty		empty
project-dhall		project-dhall
project-dhall2config		project-dhall2config
project-nix		project-nix
project-skeleton		project-skeleton
temp		temp
text-templates		text-templates
types		types
.gitignore		.gitignore
ALTERNATIVES.md		ALTERNATIVES.md
CHANGELOG.md		CHANGELOG.md
HACKING.md		HACKING.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
TEMPLATES.md		TEMPLATES.md
TESTING.md		TESTING.md
fix-whitespace.yaml		fix-whitespace.yaml
fourmolu.yaml		fourmolu.yaml
package.dhall		package.dhall
types.dhall		types.dhall
updo-offset.svg		updo-offset.svg
updo.cabal		updo.cabal
updo.png		updo.png
updo.svg		updo.svg

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

What is a Project?

Goals

Template Outputs

Maintaining a Project

1. Stackage Resolver and Constraints

2. Constraints

3. Source Repository Packages

4. Package Groups

Upgrading a Project

GHC Upgrade

Constraint Upgrade

Source Repository Upgrade

Adding a Fork

Getting Started

Bootstrap from Hackage

Bootstrap from Source

Make Targets

Canonical Targets

GHC-Prefixed Targets

Modified Time Travel

Lock Files

Clean GHC-Prefixed Projects

GHC-Prefixed Projects as Temporary

SHA256 Map Generation Method

Installed Exes or Scripts

Why Dhall for Configuration?

Acknowledgements

About

Uh oh!

Releases

Packages

Uh oh!

Contributors 2

Uh oh!

Languages

License

cabalism/updo

Folders and files

Latest commit

History

Repository files navigation

What is a Project?

Goals

Template Outputs

Maintaining a Project

1. Stackage Resolver and Constraints

2. Constraints

3. Source Repository Packages

4. Package Groups

Upgrading a Project

GHC Upgrade

Constraint Upgrade

Source Repository Upgrade

Adding a Fork

Getting Started

Bootstrap from Hackage

Bootstrap from Source

Make Targets

Canonical Targets

GHC-Prefixed Targets

Modified Time Travel

Lock Files

Clean GHC-Prefixed Projects

GHC-Prefixed Projects as Temporary

SHA256 Map Generation Method

Installed Exes or Scripts

Why Dhall for Configuration?

Acknowledgements

Footnotes

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Contributors 2

Uh oh!

Languages

Packages