KVM: arm/arm64: vgic: Update documentation of the GIC devices wrt IIDR

Update the documentation to reflect the ordering requirements of
restoring the GICD_IIDR register before any other registers and the
effects this has on restoring the interrupt groups for an emulated GICv2
instance.

Also remove some outdated limitations in the documentation while we're
at it.

Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Christoffer Dall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>

Author: christofferdall-arm

Documentation/virtual/kvm/devices/arm-vgic-v3.txt

@@ -100,6 +100,14 @@ Groups:
     Note that distributor fields are not banked, but return the same value
     regardless of the mpidr used to access the register.
 
+    GICD_IIDR.Revision is updated when the KVM implementation is changed in a
+    way directly observable by the guest or userspace.  Userspace should read
+    GICD_IIDR from KVM and write back the read value to confirm its expected
+    behavior is aligned with the KVM implementation.  Userspace should set
+    GICD_IIDR before setting any other registers to ensure the expected
+    behavior.
+
+
     The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such
     that a write of a clear bit has no effect, whereas a write with a set bit
     clears that value.  To allow userspace to freely set the values of these two

Documentation/virtual/kvm/devices/arm-vgic.txt

@@ -49,9 +49,15 @@ Groups:
     index is specified with the vcpu_index field.  Note that most distributor
     fields are not banked, but return the same value regardless of the
     vcpu_index used to access the register.
-  Limitations:
-    - Priorities are not implemented, and registers are RAZ/WI
-    - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
+
+    GICD_IIDR.Revision is updated when the KVM implementation of an emulated
+    GICv2 is changed in a way directly observable by the guest or userspace.
+    Userspace should read GICD_IIDR from KVM and write back the read value to
+    confirm its expected behavior is aligned with the KVM implementation.
+    Userspace should set GICD_IIDR before setting any other registers (both
+    KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS) to ensure
+    the expected behavior. Unless GICD_IIDR has been set from userspace, writes
+    to the interrupt group registers (GICD_IGROUPR) are ignored.
   Errors:
     -ENXIO: Getting or setting this register is not yet supported
     -EBUSY: One or more VCPUs are running
@@ -94,9 +100,6 @@ Groups:
     use the lower 5 bits to communicate with the KVM device and must shift the
     value left by 3 places to obtain the actual priority mask level.
 
-  Limitations:
-    - Priorities are not implemented, and registers are RAZ/WI
-    - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
   Errors:
     -ENXIO: Getting or setting this register is not yet supported
     -EBUSY: One or more VCPUs are running