Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf.

  Relatively calm week, likely due to public holiday in most places. No
  known outstanding regressions.

  Current release - regressions:

   - rxrpc: fix wrong alignmask in __page_frag_alloc_align()

   - eth: e1000e: change usleep_range to udelay in PHY mdic access

  Previous releases - regressions:

   - gro: fix udp bad offset in socket lookup

   - bpf: fix incorrect runtime stat for arm64

   - tipc: fix UAF in error path

   - netfs: fix a potential infinite loop in extract_user_to_sg()

   - eth: ice: ensure the copied buf is NUL terminated

   - eth: qeth: fix kernel panic after setting hsuid

  Previous releases - always broken:

   - bpf:
       - verifier: prevent userspace memory access
       - xdp: use flags field to disambiguate broadcast redirect

   - bridge: fix multicast-to-unicast with fraglist GSO

   - mptcp: ensure snd_nxt is properly initialized on connect

   - nsh: fix outer header access in nsh_gso_segment().

   - eth: bcmgenet: fix racing registers access

   - eth: vxlan: fix stats counters.

  Misc:

   - a bunch of MAINTAINERS file updates"

* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
  MAINTAINERS: remove Ariel Elior
  net: gro: add flush check in udp_gro_receive_segment
  net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
  ipv4: Fix uninit-value access in __ip_make_skb()
  s390/qeth: Fix kernel panic after setting hsuid
  vxlan: Pull inner IP header in vxlan_rcv().
  tipc: fix a possible memleak in tipc_buf_append
  tipc: fix UAF in error path
  rxrpc: Clients must accept conn from any address
  net: core: reject skb_copy(_expand) for fraglist GSO skbs
  net: bridge: fix multicast-to-unicast with fraglist GSO
  mptcp: ensure snd_nxt is properly initialized on connect
  e1000e: change usleep_range to udelay in PHY mdic access
  net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
  cxgb4: Properly lock TX queue for the selftest.
  rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
  vxlan: Add missing VNI filter counter update in arp_reduce().
  vxlan: Fix racy device stats updates.
  net: qede: use return from qede_parse_actions()
  ...

Author: torvalds

.mailmap

@@ -512,6 +512,7 @@ Praveen BP <[email protected]>
 Pradeep Kumar Chitrapu <[email protected]> <[email protected]>
 Prasad Sodagudi <[email protected]> <[email protected]>
 Punit Agrawal <[email protected]> <[email protected]>
+Puranjay Mohan <[email protected]> <[email protected]>
 Qais Yousef <[email protected]> <[email protected]>
 Qais Yousef <[email protected]> <[email protected]>
 Quentin Monnet <[email protected]> <[email protected]>

MAINTAINERS

@@ -553,7 +553,7 @@ F:	Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
 F:	drivers/input/misc/adxl34x.c
 
 ADXL355 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
-M:	Puranjay Mohan <[email protected]>
+M:	Puranjay Mohan <[email protected]>
 L:	[email protected]
 S:	Supported
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -3714,7 +3714,7 @@ F:	drivers/iio/imu/bmi323/
 
 BPF JIT for ARM
 M:	Russell King <[email protected]>
-M:	Puranjay Mohan <[email protected]>
+M:	Puranjay Mohan <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	arch/arm/net/
@@ -3764,6 +3764,8 @@ X:	arch/riscv/net/bpf_jit_comp64.c
 
 BPF JIT for RISC-V (64-bit)
 M:	Björn Töpel <[email protected]>
+R:	Pu Lehui <[email protected]>
+R:	Puranjay Mohan <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	arch/riscv/net/
@@ -4191,7 +4193,6 @@ S:	Supported
 F:	drivers/scsi/bnx2i/
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Ariel Elior <[email protected]>
 M:	Sudarsana Kalluru <[email protected]>
 M:	Manish Chopra <[email protected]>
 L:	[email protected]
@@ -15160,9 +15161,8 @@ F:	drivers/scsi/myrb.*
 F:	drivers/scsi/myrs.*
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-M:	Chris Lee <[email protected]>
 L:	[email protected]
-S:	Supported
+S:	Orphan
 W:	https://www.cspi.com/ethernet-products/support/downloads/
 F:	drivers/net/ethernet/myricom/myri10ge/
 
@@ -17990,7 +17990,6 @@ S:	Supported
 F:	drivers/scsi/qedi/
 
 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Ariel Elior <[email protected]>
 M:	Manish Chopra <[email protected]>
 L:	[email protected]
 S:	Supported
@@ -18000,7 +17999,6 @@ F:	include/linux/qed/
 
 QLOGIC QL4xxx RDMA DRIVER
 M:	Michal Kalderon <[email protected]>
-M:	Ariel Elior <[email protected]>
 L:	[email protected]
 S:	Supported
 F:	drivers/infiniband/hw/qedr/
@@ -21918,7 +21916,7 @@ F:	include/linux/soc/ti/ti_sci_inta_msi.h
 F:	include/linux/soc/ti/ti_sci_protocol.h
 
 TEXAS INSTRUMENTS' TMP117 TEMPERATURE SENSOR DRIVER
-M:	Puranjay Mohan <[email protected]>
+M:	Puranjay Mohan <[email protected]>
 L:	[email protected]
 S:	Supported
 F:	Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -24459,6 +24457,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/har
 F:	Documentation/admin-guide/LSM/Yama.rst
 F:	security/yama/
 
+YAML NETLINK (YNL)
+M:	Donald Hunter <[email protected]>
+M:	Jakub Kicinski <[email protected]>
+F:	Documentation/netlink/
+F:	Documentation/userspace-api/netlink/intro-specs.rst
+F:	Documentation/userspace-api/netlink/specs.rst
+F:	tools/net/ynl/
+
 YEALINK PHONE DRIVER
 M:	Henk Vergonet <[email protected]>
 L:	[email protected]

arch/arm/net/bpf_jit_32.c

@@ -871,16 +871,11 @@ static inline void emit_a32_alu_r64(const bool is64, const s8 dst[],
 }
 
 /* dst = src (4 bytes)*/
-static inline void emit_a32_mov_r(const s8 dst, const s8 src, const u8 off,
-				  struct jit_ctx *ctx) {
+static inline void emit_a32_mov_r(const s8 dst, const s8 src, struct jit_ctx *ctx) {
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	s8 rt;
 
 	rt = arm_bpf_get_reg32(src, tmp[0], ctx);
-	if (off && off != 32) {
-		emit(ARM_LSL_I(rt, rt, 32 - off), ctx);
-		emit(ARM_ASR_I(rt, rt, 32 - off), ctx);
-	}
 	arm_bpf_put_reg32(dst, rt, ctx);
 }
 
@@ -889,15 +884,15 @@ static inline void emit_a32_mov_r64(const bool is64, const s8 dst[],
 				  const s8 src[],
 				  struct jit_ctx *ctx) {
 	if (!is64) {
-		emit_a32_mov_r(dst_lo, src_lo, 0, ctx);
+		emit_a32_mov_r(dst_lo, src_lo, ctx);
 		if (!ctx->prog->aux->verifier_zext)
 			/* Zero out high 4 bytes */
 			emit_a32_mov_i(dst_hi, 0, ctx);
 	} else if (__LINUX_ARM_ARCH__ < 6 &&
 		   ctx->cpu_architecture < CPU_ARCH_ARMv5TE) {
 		/* complete 8 byte move */
-		emit_a32_mov_r(dst_lo, src_lo, 0, ctx);
-		emit_a32_mov_r(dst_hi, src_hi, 0, ctx);
+		emit_a32_mov_r(dst_lo, src_lo, ctx);
+		emit_a32_mov_r(dst_hi, src_hi, ctx);
 	} else if (is_stacked(src_lo) && is_stacked(dst_lo)) {
 		const u8 *tmp = bpf2a32[TMP_REG_1];
 
@@ -917,17 +912,52 @@ static inline void emit_a32_mov_r64(const bool is64, const s8 dst[],
 static inline void emit_a32_movsx_r64(const bool is64, const u8 off, const s8 dst[], const s8 src[],
 				      struct jit_ctx *ctx) {
 	const s8 *tmp = bpf2a32[TMP_REG_1];
-	const s8 *rt;
+	s8 rs;
+	s8 rd;
 
-	rt = arm_bpf_get_reg64(dst, tmp, ctx);
+	if (is_stacked(dst_lo))
+		rd = tmp[1];
+	else
+		rd = dst_lo;
+	rs = arm_bpf_get_reg32(src_lo, rd, ctx);
+	/* rs may be one of src[1], dst[1], or tmp[1] */
+
+	/* Sign extend rs if needed. If off == 32, lower 32-bits of src are moved to dst and sign
+	 * extension only happens in the upper 64 bits.
+	 */
+	if (off != 32) {
+		/* Sign extend rs into rd */
+		emit(ARM_LSL_I(rd, rs, 32 - off), ctx);
+		emit(ARM_ASR_I(rd, rd, 32 - off), ctx);
+	} else {
+		rd = rs;
+	}
+
+	/* Write rd to dst_lo
+	 *
+	 * Optimization:
+	 * Assume:
+	 * 1. dst == src and stacked.
+	 * 2. off == 32
+	 *
+	 * In this case src_lo was loaded into rd(tmp[1]) but rd was not sign extended as off==32.
+	 * So, we don't need to write rd back to dst_lo as they have the same value.
+	 * This saves us one str instruction.
+	 */
+	if (dst_lo != src_lo || off != 32)
+		arm_bpf_put_reg32(dst_lo, rd, ctx);
 
-	emit_a32_mov_r(dst_lo, src_lo, off, ctx);
 	if (!is64) {
 		if (!ctx->prog->aux->verifier_zext)
 			/* Zero out high 4 bytes */
 			emit_a32_mov_i(dst_hi, 0, ctx);
 	} else {
-		emit(ARM_ASR_I(rt[0], rt[1], 31), ctx);
+		if (is_stacked(dst_hi)) {
+			emit(ARM_ASR_I(tmp[0], rd, 31), ctx);
+			arm_bpf_put_reg32(dst_hi, tmp[0], ctx);
+		} else {
+			emit(ARM_ASR_I(dst_hi, rd, 31), ctx);
+		}
 	}
 }
 

arch/arm64/net/bpf_jit_comp.c

@@ -1844,15 +1844,15 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 
 	emit_call(enter_prog, ctx);
 
+	/* save return value to callee saved register x20 */
+	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
+
 	/* if (__bpf_prog_enter(prog) == 0)
 	 *         goto skip_exec_of_prog;
 	 */
 	branch = ctx->image + ctx->idx;
 	emit(A64_NOP, ctx);
 
-	/* save return value to callee saved register x20 */
-	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
-
 	emit(A64_ADD_I(1, A64_R(0), A64_SP, args_off), ctx);
 	if (!p->jited)
 		emit_addr_mov_i64(A64_R(1), (const u64)p->insnsi, ctx);

arch/riscv/net/bpf_jit_comp64.c

@@ -722,16 +722,16 @@ static int invoke_bpf_prog(struct bpf_tramp_link *l, int args_off, int retval_of
 	if (ret)
 		return ret;
 
+	/* store prog start time */
+	emit_mv(RV_REG_S1, RV_REG_A0, ctx);
+
 	/* if (__bpf_prog_enter(prog) == 0)
 	 *	goto skip_exec_of_prog;
 	 */
 	branch_off = ctx->ninsns;
 	/* nop reserved for conditional jump */
 	emit(rv_nop(), ctx);
 
-	/* store prog start time */
-	emit_mv(RV_REG_S1, RV_REG_A0, ctx);
-
 	/* arg1: &args_off */
 	emit_addi(RV_REG_A0, RV_REG_FP, -args_off, ctx);
 	if (!p->jited)

arch/x86/net/bpf_jit_comp.c

@@ -1807,36 +1807,41 @@ st:			if (is_imm8(insn->off))
 			if (BPF_MODE(insn->code) == BPF_PROBE_MEM ||
 			    BPF_MODE(insn->code) == BPF_PROBE_MEMSX) {
 				/* Conservatively check that src_reg + insn->off is a kernel address:
-				 *   src_reg + insn->off >= TASK_SIZE_MAX + PAGE_SIZE
-				 * src_reg is used as scratch for src_reg += insn->off and restored
-				 * after emit_ldx if necessary
+				 *   src_reg + insn->off > TASK_SIZE_MAX + PAGE_SIZE
+				 *   and
+				 *   src_reg + insn->off < VSYSCALL_ADDR
 				 */
 
-				u64 limit = TASK_SIZE_MAX + PAGE_SIZE;
+				u64 limit = TASK_SIZE_MAX + PAGE_SIZE - VSYSCALL_ADDR;
 				u8 *end_of_jmp;
 
-				/* At end of these emitted checks, insn->off will have been added
-				 * to src_reg, so no need to do relative load with insn->off offset
-				 */
-				insn_off = 0;
+				/* movabsq r10, VSYSCALL_ADDR */
+				emit_mov_imm64(&prog, BPF_REG_AX, (long)VSYSCALL_ADDR >> 32,
+					       (u32)(long)VSYSCALL_ADDR);
 
-				/* movabsq r11, limit */
-				EMIT2(add_1mod(0x48, AUX_REG), add_1reg(0xB8, AUX_REG));
-				EMIT((u32)limit, 4);
-				EMIT(limit >> 32, 4);
+				/* mov src_reg, r11 */
+				EMIT_mov(AUX_REG, src_reg);
 
 				if (insn->off) {
-					/* add src_reg, insn->off */
-					maybe_emit_1mod(&prog, src_reg, true);
-					EMIT2_off32(0x81, add_1reg(0xC0, src_reg), insn->off);
+					/* add r11, insn->off */
+					maybe_emit_1mod(&prog, AUX_REG, true);
+					EMIT2_off32(0x81, add_1reg(0xC0, AUX_REG), insn->off);
 				}
 
-				/* cmp src_reg, r11 */
-				maybe_emit_mod(&prog, src_reg, AUX_REG, true);
-				EMIT2(0x39, add_2reg(0xC0, src_reg, AUX_REG));
+				/* sub r11, r10 */
+				maybe_emit_mod(&prog, AUX_REG, BPF_REG_AX, true);
+				EMIT2(0x29, add_2reg(0xC0, AUX_REG, BPF_REG_AX));
+
+				/* movabsq r10, limit */
+				emit_mov_imm64(&prog, BPF_REG_AX, (long)limit >> 32,
+					       (u32)(long)limit);
+
+				/* cmp r10, r11 */
+				maybe_emit_mod(&prog, AUX_REG, BPF_REG_AX, true);
+				EMIT2(0x39, add_2reg(0xC0, AUX_REG, BPF_REG_AX));
 
-				/* if unsigned '>=', goto load */
-				EMIT2(X86_JAE, 0);
+				/* if unsigned '>', goto load */
+				EMIT2(X86_JA, 0);
 				end_of_jmp = prog;
 
 				/* xor dst_reg, dst_reg */
@@ -1862,18 +1867,6 @@ st:			if (is_imm8(insn->off))
 				/* populate jmp_offset for JMP above */
 				start_of_ldx[-1] = prog - start_of_ldx;
 
-				if (insn->off && src_reg != dst_reg) {
-					/* sub src_reg, insn->off
-					 * Restore src_reg after "add src_reg, insn->off" in prev
-					 * if statement. But if src_reg == dst_reg, emit_ldx
-					 * above already clobbered src_reg, so no need to restore.
-					 * If add src_reg, insn->off was unnecessary, no need to
-					 * restore either.
-					 */
-					maybe_emit_1mod(&prog, src_reg, true);
-					EMIT2_off32(0x81, add_1reg(0xE8, src_reg), insn->off);
-				}
-
 				if (!bpf_prog->aux->extable)
 					break;
 
@@ -3473,3 +3466,9 @@ bool bpf_jit_supports_ptr_xchg(void)
 {
 	return true;
 }
+
+/* x86-64 JIT emits its own code to filter user addresses so return 0 here */
+u64 bpf_arch_uaddress_limit(void)
+{
+	return 0;
+}

drivers/net/dsa/mv88e6xxx/chip.c

@@ -5705,7 +5705,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6141,
 		.family = MV88E6XXX_FAMILY_6341,
 		.name = "Marvell 88E6141",
-		.num_databases = 4096,
+		.num_databases = 256,
 		.num_macs = 2048,
 		.num_ports = 6,
 		.num_internal_phys = 5,
@@ -6164,7 +6164,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
 		.family = MV88E6XXX_FAMILY_6341,
 		.name = "Marvell 88E6341",
-		.num_databases = 4096,
+		.num_databases = 256,
 		.num_macs = 2048,
 		.num_internal_phys = 5,
 		.num_ports = 6,