deps: [email protected]

Author: wraithgar

node_modules/node-gyp/.release-please-manifest.json

@@ -1,3 +1,3 @@
 {
-    ".": "11.0.0"
+    ".": "11.1.0"
 }

node_modules/node-gyp/gyp/.release-please-manifest.json

@@ -1,3 +1,3 @@
 {
-    ".": "0.18.1"
+    ".": "0.19.1"
 }

node_modules/node-gyp/gyp/docs/Hacking.md

@@ -34,7 +34,7 @@ See [Testing](Testing.md) for more details on the test framework.
 Note that it can be handy to look at the project files output by the tests
 to diagnose problems. The easiest way to do that is by kindly asking the
 test driver to leave the temporary directories it creates in-place.
-This is done by setting the enviroment variable "PRESERVE", e.g.
+This is done by setting the environment variable "PRESERVE", e.g.
 
 ```
 set PRESERVE=all     # On Windows

node_modules/node-gyp/gyp/docs/LanguageSpecification.md

@@ -157,7 +157,7 @@ have structural meaning for target definitions:
 | `all_dependent_settings`     | A dictionary of settings to be applied to all dependents of the target, transitively.  This includes direct dependents and the entire set of their dependents, and so on.  This section may contain anything found within a `target` dictionary, except `configurations`, `target_name`, and `type` sections.  Compare `direct_dependent_settings` and `link_settings`. |
 | `configurations`             | A list of dictionaries defining build configurations for the target.  See the "Configurations" section below.  |
 | `copies`                     | A list of copy actions to perform. See the "Copies" section below. |
-| `defines`                    | A list of preprocesor definitions to be passed on the command line to the C/C++ compiler (via `-D` or `/D` options). |
+| `defines`                    | A list of preprocessor definitions to be passed on the command line to the C/C++ compiler (via `-D` or `/D` options). |
 | `dependencies`               | A list of targets on which this target depends.  Targets in other `.gyp` files are specified as `../path/to/other.gyp:target_we_want`. |
 | `direct_dependent_settings`  | A dictionary of settings to be applied to other targets that depend on this target.  These settings will only be applied to direct dependents.  This section may contain anything found within a `target` dictionary, except `configurations`, `target_name`, and `type` sections.  Compare with `all_dependent_settings` and `link_settings`. |
 | `include_dirs`               | A list of include directories to be passed on the command line to the C/C++ compiler (via `-I` or `/I` options). |
@@ -208,8 +208,8 @@ Configuration dictionaries may also contain these elements:
 
 Conditionals may appear within any dictionary in a `.gyp` file.  There
 are two tpes of conditionals, which differ only in the timing of their
-processing.  `conditons` sections are processed shortly after loading
-`.gyp` files, and `target_conditons` sections are processed after all
+processing.  `conditions` sections are processed shortly after loading
+`.gyp` files, and `target_conditions` sections are processed after all
 dependencies have been computed.
 
 A conditional section is introduced with a `conditions` or

node_modules/node-gyp/gyp/docs/Testing.md

@@ -392,15 +392,15 @@ fails the test if it does.
 
 Verifies that the output string contains all of the "lines" in the specified
 list of lines.  In practice, the lines can be any substring and need not be
-`\n`-terminaed lines per se.  If any line is missing, the test fails.
+`\n`-terminated lines per se.  If any line is missing, the test fails.
 
 ```
   test.must_not_contain_any_lines(output, lines)
 ```
 
 Verifies that the output string does _not_ contain any of the "lines" in the
 specified list of lines.  In practice, the lines can be any substring and need
-not be `\n`-terminaed lines per se.  If any line exists in the output string,
+not be `\n`-terminated lines per se.  If any line exists in the output string,
 the test fails.
 
 ```
@@ -409,7 +409,7 @@ the test fails.
 
 Verifies that the output string contains at least one of the "lines" in the
 specified list of lines.  In practice, the lines can be any substring and need
-not be `\n`-terminaed lines per se.  If none of the specified lines is present,
+not be `\n`-terminated lines per se.  If none of the specified lines is present,
 the test fails.
 
 ### Reading file contents

node_modules/node-gyp/gyp/docs/UserDocumentation.md

@@ -104,7 +104,7 @@ describing all the information necessary to build the target.
 
 `'conditions'`:  A list of condition specifications that can modify the
 contents of the items in the global dictionary defined by this `.gyp`
-file based on the values of different variablwes.  As implied by the
+file based on the values of different variables.  As implied by the
 above example, the most common use of a `conditions` section in the
 top-level dictionary is to add platform-specific targets to the
 `targets` list.
@@ -375,7 +375,7 @@ If your platform-specific file does not contain a
 already in the `conditions` for the target), and you can't change the
 file name, there are two patterns that can be used.
 
-**Prefererred**:  Add the file to the `sources` list of the appropriate
+**Preferred**:  Add the file to the `sources` list of the appropriate
 dictionary within the `targets` list.  Add an appropriate `conditions`
 section to exclude the specific files name:
 
@@ -807,7 +807,7 @@ directory:
 ```
 
 Adding a library often involves updating multiple `.gyp` files, adding
-the target to the approprate `.gyp` file (possibly a newly-added `.gyp`
+the target to the appropriate `.gyp` file (possibly a newly-added `.gyp`
 file), and updating targets in the other `.gyp` files that depend on
 (link with) the new library.
 
@@ -858,7 +858,7 @@ because of those settings' being listed in the
 `direct_dependent_settings` block.
 
 Note that these settings will likely need to be replicated in the
-settings for the library target itsef, so that the library will build
+settings for the library target itself, so that the library will build
 with the same options.  This does not prevent the target from defining
 additional options for its "internal" use when compiling its own source
 files.  (In the above example, these are the `LOCAL_DEFINE_FOR_LIBBAR`

node_modules/node-gyp/gyp/pylib/gyp/MSVSSettings.py

@@ -171,7 +171,7 @@ def ValidateMSBuild(self, value):
         int(value, self._msbuild_base)
 
     def ConvertToMSBuild(self, value):
-        msbuild_format = (self._msbuild_base == 10) and "%d" or "0x%04x"
+        msbuild_format = ((self._msbuild_base == 10) and "%d") or "0x%04x"
         return msbuild_format % int(value)
 
 

node_modules/node-gyp/gyp/pylib/gyp/MSVSVersion.py

@@ -69,7 +69,7 @@ def UsesVcxproj(self):
 
     def ProjectExtension(self):
         """Returns the file extension for the project."""
-        return self.uses_vcxproj and ".vcxproj" or ".vcproj"
+        return (self.uses_vcxproj and ".vcxproj") or ".vcproj"
 
     def Path(self):
         """Returns the path to Visual Studio installation."""

node_modules/node-gyp/gyp/pylib/gyp/__init__.py

@@ -4,7 +4,7 @@
 # Use of this source code is governed by a BSD-style license that can be
 # found in the LICENSE file.
 
-
+from __future__ import annotations
 import copy
 import gyp.input
 import argparse
@@ -24,6 +24,18 @@
 DEBUG_VARIABLES = "variables"
 DEBUG_INCLUDES = "includes"
 
+def EscapeForCString(string: bytes | str) -> str:
+    if isinstance(string, str):
+        string = string.encode(encoding='utf8')
+
+    backslash_or_double_quote = {ord('\\'), ord('"')}
+    result = ''
+    for char in string:
+        if char in backslash_or_double_quote or not 32 <= char < 127:
+            result += '\\%03o' % char
+        else:
+            result += chr(char)
+    return result
 
 def DebugOutput(mode, message, *args):
     if "all" in gyp.debug or mode in gyp.debug:
@@ -106,18 +118,19 @@ def Load(
 
     output_dir = params["options"].generator_output or params["options"].toplevel_dir
     if default_variables["GENERATOR"] == "ninja":
-        default_variables.setdefault(
-            "PRODUCT_DIR_ABS",
-            os.path.join(
-                output_dir, "out", default_variables.get("build_type", "default")
-            ),
+        product_dir_abs = os.path.join(
+            output_dir, "out", default_variables.get("build_type", "default")
         )
     else:
-        default_variables.setdefault(
-            "PRODUCT_DIR_ABS",
-            os.path.join(output_dir, default_variables["CONFIGURATION_NAME"]),
+        product_dir_abs = os.path.join(
+            output_dir, default_variables["CONFIGURATION_NAME"]
         )
 
+    default_variables.setdefault("PRODUCT_DIR_ABS", product_dir_abs)
+    default_variables.setdefault(
+        "PRODUCT_DIR_ABS_CSTR", EscapeForCString(product_dir_abs)
+    )
+
     # Give the generator the opportunity to set additional variables based on
     # the params it will receive in the output phase.
     if getattr(generator, "CalculateVariables", None):
@@ -253,7 +266,7 @@ def Noop(value):
     for name, metadata in options._regeneration_metadata.items():
         opt = metadata["opt"]
         value = getattr(options, name)
-        value_predicate = metadata["type"] == "path" and FixPath or Noop
+        value_predicate = (metadata["type"] == "path" and FixPath) or Noop
         action = metadata["action"]
         env_name = metadata["env_name"]
         if action == "append":

node_modules/node-gyp/gyp/pylib/gyp/generator/analyzer.py

@@ -699,7 +699,7 @@ def find_matching_test_target_names(self):
         ) & set(self._root_targets)
         if matching_test_targets_contains_all:
             # Remove any of the targets for all that were not explicitly supplied,
-            # 'all' is subsequentely added to the matching names below.
+            # 'all' is subsequently added to the matching names below.
             matching_test_targets = list(
                 set(matching_test_targets) & set(test_targets_no_all)
             )