Fix astyle

Author: shreyask21

variants/STM32F7xx/F723I(C-E)(K-T)_F730I8K_F733IE(K-T)/generic_clock.c

@@ -10,31 +10,31 @@
  *
  *******************************************************************************
  */
-#if defined(ARDUINO_GENERIC_F723ICKX) || defined(ARDUINO_GENERIC_F723ICTX) ||\
-    defined(ARDUINO_GENERIC_F723IEKX) || defined(ARDUINO_GENERIC_F723IETX) ||\
-    defined(ARDUINO_GENERIC_F730I8KX) || defined(ARDUINO_GENERIC_F733IEKX) ||\
+#if defined(ARDUINO_GENERIC_F723ICKX) || defined(ARDUINO_GENERIC_F723ICTX) || \
+    defined(ARDUINO_GENERIC_F723IEKX) || defined(ARDUINO_GENERIC_F723IETX) || \
+    defined(ARDUINO_GENERIC_F730I8KX) || defined(ARDUINO_GENERIC_F733IEKX) || \
     defined(ARDUINO_GENERIC_F733IETX)
 #include "pins_arduino.h"
 
 /**
-  * @brief  System Clock Configuration
-  * @param  None
-  * @retval None
-  */
+ * @brief  System Clock Configuration
+ * @param  None
+ * @retval None
+ */
 WEAK void SystemClock_Config(void)
 {
   /* SystemClock_Config can be generated by STM32CubeMX */
-    RCC_OscInitTypeDef RCC_OscInitStruct = {};
+  RCC_OscInitTypeDef RCC_OscInitStruct = {};
   RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
 
   /** Configure the main internal regulator output voltage
-  */
+   */
   __HAL_RCC_PWR_CLK_ENABLE();
   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
 
   /** Initializes the RCC Oscillators according to the specified parameters
-  * in the RCC_OscInitTypeDef structure.
-  */
+   * in the RCC_OscInitTypeDef structure.
+   */
   RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
   RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
@@ -44,29 +44,25 @@ WEAK void SystemClock_Config(void)
   RCC_OscInitStruct.PLL.PLLN = 432;
   RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
   RCC_OscInitStruct.PLL.PLLQ = 9;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
     Error_Handler();
   }
 
   /** Activate the Over-Drive mode
-  */
-  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
-  {
+   */
+  if (HAL_PWREx_EnableOverDrive() != HAL_OK) {
     Error_Handler();
   }
 
   /** Initializes the CPU, AHB and APB buses clocks
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+   */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
   RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
   RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
   RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
   RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
 
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
-  {
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) {
     Error_Handler();
   }
 }