Fix issues in setting radio access technology

features/cellular/framework/API/CellularNetwork.h

@@ -161,6 +161,13 @@ class CellularNetwork {
         NWModeManualAutomatic   // if manual fails, fallback to automatic
     };
 
+    /// Operator name format
+    enum OperatorNameFormat {
+        OperatorNameAlphaLong = 0,    // alphanumeric long form
+        OperatorNameAlphaShort,       // alphanumeric short form
+        OperatorNameNumeric           // numeric digits
+    };
+
     /// Network registration information
     struct registration_params_t {
         RegistrationType _type;

features/cellular/framework/AT/AT_CellularDevice.h

@@ -42,21 +42,22 @@ class AT_CellularDevice : public CellularDevice {
      *       to the end (just before PROPERTY_MAX). Do not modify any of the existing fields.
      */
     enum CellularProperty {
-        PROPERTY_C_EREG,            // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
-        PROPERTY_C_GREG,            // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
-        PROPERTY_C_REG,             // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
-        PROPERTY_AT_CGSN_WITH_TYPE, // 0 = not supported, 1 = supported. AT+CGSN without type is likely always supported similar to AT+GSN.
-        PROPERTY_AT_CGDATA,         // 0 = not supported, 1 = supported. Alternative is to support only ATD*99***<cid>#
-        PROPERTY_AT_CGAUTH,         // 0 = not supported, 1 = supported. APN authentication AT commands supported
-        PROPERTY_AT_CNMI,           // 0 = not supported, 1 = supported. New message (SMS) indication AT command
-        PROPERTY_AT_CSMP,           // 0 = not supported, 1 = supported. Set text mode AT command
-        PROPERTY_AT_CMGF,           // 0 = not supported, 1 = supported. Set preferred message format AT command
-        PROPERTY_AT_CSDH,           // 0 = not supported, 1 = supported. Show text mode AT command
-        PROPERTY_IPV4_PDP_TYPE,     // 0 = not supported, 1 = supported. Does modem support IPV4?
-        PROPERTY_IPV6_PDP_TYPE,     // 0 = not supported, 1 = supported. Does modem support IPV6?
-        PROPERTY_IPV4V6_PDP_TYPE,   // 0 = not supported, 1 = supported. Does modem support IPV4 and IPV6 simultaneously?
-        PROPERTY_NON_IP_PDP_TYPE,   // 0 = not supported, 1 = supported. Does modem support Non-IP?
-        PROPERTY_AT_CGEREP,         // 0 = not supported, 1 = supported. Does modem support AT command AT+CGEREP.
+        PROPERTY_C_EREG,                // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
+        PROPERTY_C_GREG,                // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
+        PROPERTY_C_REG,                 // AT_CellularNetwork::RegistrationMode. What support modem has for this registration type.
+        PROPERTY_AT_CGSN_WITH_TYPE,     // 0 = not supported, 1 = supported. AT+CGSN without type is likely always supported similar to AT+GSN.
+        PROPERTY_AT_CGDATA,             // 0 = not supported, 1 = supported. Alternative is to support only ATD*99***<cid>#
+        PROPERTY_AT_CGAUTH,             // 0 = not supported, 1 = supported. APN authentication AT commands supported
+        PROPERTY_AT_CNMI,               // 0 = not supported, 1 = supported. New message (SMS) indication AT command
+        PROPERTY_AT_CSMP,               // 0 = not supported, 1 = supported. Set text mode AT command
+        PROPERTY_AT_CMGF,               // 0 = not supported, 1 = supported. Set preferred message format AT command
+        PROPERTY_AT_CSDH,               // 0 = not supported, 1 = supported. Show text mode AT command
+        PROPERTY_IPV4_PDP_TYPE,         // 0 = not supported, 1 = supported. Does modem support IPV4?
+        PROPERTY_IPV6_PDP_TYPE,         // 0 = not supported, 1 = supported. Does modem support IPV6?
+        PROPERTY_IPV4V6_PDP_TYPE,       // 0 = not supported, 1 = supported. Does modem support IPV4 and IPV6 simultaneously?
+        PROPERTY_NON_IP_PDP_TYPE,       // 0 = not supported, 1 = supported. Does modem support Non-IP?
+        PROPERTY_AT_CGEREP,             // 0 = not supported, 1 = supported. Does modem support AT command AT+CGEREP.
+        PROPERTY_AT_COPS_FALLBACK_AUTO, // 0 = not supported, 1 = supported. Does modem support mode 4 of AT+COPS= ?
 
         PROPERTY_MAX
     };

features/cellular/framework/AT/AT_CellularNetwork.cpp

@@ -209,9 +209,10 @@ nsapi_error_t AT_CellularNetwork::get_network_registering_mode(NWRegisteringMode
 nsapi_error_t AT_CellularNetwork::set_registration(const char *plmn)
 {
 
+    NWRegisteringMode mode = NWModeAutomatic;
+
     if (!plmn) {
         tr_debug("Automatic network registration");
-        NWRegisteringMode mode;
         if (get_network_registering_mode(mode) != NSAPI_ERROR_OK) {
             return NSAPI_ERROR_DEVICE_ERROR;
         }
@@ -221,10 +222,17 @@ nsapi_error_t AT_CellularNetwork::set_registration(const char *plmn)
         return NSAPI_ERROR_OK;
     } else {
         tr_debug("Manual network registration to %s", plmn);
+        mode = NWModeManual;
+        OperatorNameFormat format = OperatorNameNumeric;
+#ifdef MBED_CONF_CELLULAR_PLMN_FALLBACK_AUTO
+        if (_device.get_property(AT_CellularDevice::PROPERTY_AT_COPS_FALLBACK_AUTO)) {
+            mode = NWModeManualAutomatic;
+        }
+#endif
         if (_op_act != RAT_UNKNOWN) {
-            return _at.at_cmd_discard("+COPS", "=1,2,", "%s%d", plmn, _op_act);
+            return _at.at_cmd_discard("+COPS", "=", "%d%d%s%d", mode, format, plmn, _op_act);
         } else {
-            return _at.at_cmd_discard("+COPS", "=1,2,", "%s", plmn);
+            return _at.at_cmd_discard("+COPS", "=", "%d%d%s", mode, format, plmn);
         }
     }
 }

features/cellular/framework/targets/GENERIC/GENERIC_AT3GPP/GENERIC_AT3GPP.cpp

@@ -37,6 +37,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 GENERIC_AT3GPP::GENERIC_AT3GPP(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/MultiTech/DragonflyNano/PPP/SARA4_PPP.cpp

@@ -37,6 +37,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 SARA4_PPP::SARA4_PPP(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/QUECTEL/BC95/QUECTEL_BC95.cpp

@@ -43,7 +43,8 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV6_STACK
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
-    0,  // PROPERTY_AT_CGEREP
+    0,  // PROPERTY_AT_CGEREP,
+    0,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 QUECTEL_BC95::QUECTEL_BC95(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/QUECTEL/BG96/QUECTEL_BG96.cpp

@@ -60,7 +60,8 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV6_STACK
     0,  // PROPERTY_IPV4V6_STACK
     1,  // PROPERTY_NON_IP_PDP_TYPE
-    1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_CGEREP,
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 QUECTEL_BG96::QUECTEL_BG96(FileHandle *fh, PinName pwr, bool active_high, PinName rst)

features/cellular/framework/targets/QUECTEL/EC2X/QUECTEL_EC2X.cpp

@@ -61,7 +61,8 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV6_STACK
     1,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
-    1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_CGEREP,
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 QUECTEL_EC2X::QUECTEL_EC2X(FileHandle *fh, PinName pwr, bool active_high, PinName rst)

features/cellular/framework/targets/QUECTEL/M26/QUECTEL_M26.cpp

@@ -40,6 +40,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 QUECTEL_M26::QUECTEL_M26(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/QUECTEL/UG96/QUECTEL_UG96.cpp

@@ -42,7 +42,8 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     0,  // PROPERTY_IPV6_STACK
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
-    1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_CGEREP,
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 QUECTEL_UG96::QUECTEL_UG96(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/RiotMicro/AT/RM1000_AT.cpp

@@ -44,6 +44,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     0,  // PROPERTY_AT_CGEREP
+    0,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 RM1000_AT::RM1000_AT(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/TELIT/HE910/TELIT_HE910.cpp

@@ -36,7 +36,8 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     0,  // PROPERTY_IPV6_STACK
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
-    1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_CGEREP,
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 TELIT_HE910::TELIT_HE910(FileHandle *fh) : AT_CellularDevice(fh)

features/cellular/framework/targets/TELIT/ME910/TELIT_ME910.cpp

@@ -17,6 +17,7 @@
 
 #include "TELIT_ME910.h"
 #include "TELIT_ME910_CellularContext.h"
+#include "TELIT_ME910_CellularNetwork.h"
 #include "AT_CellularNetwork.h"
 #include "PinNames.h"
 #include "rtos/ThisThread.h"
@@ -57,6 +58,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 //the delay between sending AT commands
@@ -187,3 +189,8 @@ nsapi_error_t TELIT_ME910::soft_power_off()
 {
     return AT_CellularDevice::soft_power_off();
 }
+
+AT_CellularNetwork *TELIT_ME910::open_network_impl(ATHandler &at)
+{
+    return new TELIT_ME910_CellularNetwork(at, *this);
+}

features/cellular/framework/targets/TELIT/ME910/TELIT_ME910.h

@@ -48,6 +48,8 @@ class TELIT_ME910 : public AT_CellularDevice {
     virtual nsapi_error_t hard_power_off();
     virtual nsapi_error_t soft_power_on();
     virtual nsapi_error_t soft_power_off();
+    virtual AT_CellularNetwork *open_network_impl(ATHandler &at);
+
 private:
     bool _active_high;
     DigitalOut _pwr_key;

features/cellular/framework/targets/TELIT/ME910/TELIT_ME910_CellularNetwork.cpp

@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2019, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "TELIT_ME910_CellularNetwork.h"
+
+using namespace mbed;
+
+TELIT_ME910_CellularNetwork::TELIT_ME910_CellularNetwork(ATHandler &atHandler, AT_CellularDevice &device) : AT_CellularNetwork(atHandler, device)
+{
+}
+
+TELIT_ME910_CellularNetwork::~TELIT_ME910_CellularNetwork()
+{
+}
+
+nsapi_error_t TELIT_ME910_CellularNetwork::set_access_technology_impl(RadioAccessTechnology opsAct)
+{
+    switch (opsAct) {
+        case RAT_GSM:
+        case RAT_CATM1:
+        case RAT_NB1:
+            _op_act = opsAct;
+            return NSAPI_ERROR_OK;
+
+        default:
+            _op_act = RAT_UNKNOWN;
+            return NSAPI_ERROR_UNSUPPORTED;
+    }
+}
+
+

features/cellular/framework/targets/TELIT/ME910/TELIT_ME910_CellularNetwork.h

@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2019, Arm Limited and affiliates.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef TELIT_ME910_CELLULAR_NETWORK_H_
+#define TELIT_ME910_CELLULAR_NETWORK_H_
+
+#include "AT_CellularNetwork.h"
+
+namespace mbed {
+
+class TELIT_ME910_CellularNetwork : public AT_CellularNetwork {
+public:
+    TELIT_ME910_CellularNetwork(ATHandler &atHandler, AT_CellularDevice &device);
+    virtual ~ TELIT_ME910_CellularNetwork();
+
+protected:
+    virtual nsapi_error_t set_access_technology_impl(RadioAccessTechnology opRat);
+
+};
+
+} // namespace mbed
+
+#endif // TELIT_ME910_CELLULAR_NETWORK_H_

features/cellular/framework/targets/UBLOX/AT/UBLOX_AT.cpp

@@ -37,6 +37,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 #elif defined(UBX_MDM_SARA_U2XX) || defined(UBX_MDM_SARA_G3XX)
 static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {

features/cellular/framework/targets/UBLOX/N2XX/UBLOX_N2XX.cpp

@@ -34,6 +34,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     1,  // PROPERTY_IPV4_STACK
     0,  // PROPERTY_IPV6_STACK
     0,  // PROPERTY_IPV4V6_STACK
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 
 UBLOX_N2XX::UBLOX_N2XX(FileHandle *fh): AT_CellularDevice(fh)

features/cellular/framework/targets/UBLOX/PPP/UBLOX_PPP.cpp

@@ -38,6 +38,7 @@ static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {
     0,  // PROPERTY_IPV4V6_STACK
     0,  // PROPERTY_NON_IP_PDP_TYPE
     1,  // PROPERTY_AT_CGEREP
+    1,  // PROPERTY_AT_COPS_FALLBACK_AUTO
 };
 #elif defined(UBX_MDM_SARA_U2XX) || defined(UBX_MDM_SARA_G3XX)
 static const intptr_t cellular_properties[AT_CellularDevice::PROPERTY_MAX] = {

features/cellular/mbed_lib.json

@@ -36,6 +36,10 @@
         "max-cp-data-recv-len" : {
             "help": "Max length of the buffer storing data received over control plane",
             "value": 1358
+        },
+        "plmn-fallback-auto" : {
+            "help": "If manual PLMN is selected, use mode 4 manual/automatic in AT+COPS to try automatic mode if manual selection fails. Set to null to disable",
+            "value": null
         }
     }
 }