Gerber_PCB1

This folder contains the full set of Gerber files, drill data, and schematic required for manufacturing and testing the PCB design.

---

📁 Directory Contents

File Name	Description
Drill_NPTH_Through.DRL	Non-plated through-hole drill data
Drill_PTH_Through.DRL	Plated through-hole drill data
Drill_PTH_Through_Via.DRL	Via drill data (plated through vias)
FlyingProbeTesting.json	Configuration for flying probe test systems
Gerber_BoardOutlineLayer.GKO	Board mechanical outline
Gerber_BottomLayer.GBL	Bottom copper layer
Gerber_BottomSilkscreenLayer.GBO	Bottom silkscreen layer
Gerber_BottomSolderMaskLayer.GBS	Bottom solder mask layer
Gerber_DocumentLayer.GDL	Documentation / assembly notes layer
Gerber_DrillDrawingLayer.GDD	Drill drawing for reference
Gerber_TopLayer.GTL	Top copper layer
Gerber_TopSilkscreenLayer.GTO	Top silkscreen layer
Gerber_TopSolderMaskLayer.GTS	Top solder mask layer
Schematic.pdf	Full schematic diagram in PDF format

---

🛠️ Usage Instructions

• This directory can be directly used for PCB fabrication and testing.
• Gerber and drill files conform to standard RS-274X format, suitable for most PCB manufacturers.
• Use FlyingProbeTesting.json if your manufacturer supports automated electrical test (AET).

---

🧾 Notes

• Ensure drill layers are interpreted correctly — especially NPTH vs PTH separation.
• The outline file .GKO defines the finished board shape and cutouts.
• Schematic included for BOM verification and component placement.