Skip to content

Bluetooth transport notes

Jump to bottom Edit New page
Rodion Malinovsky edited this page Mar 16, 2016 · 2 revisions

Bluetooth transport setup

Install device drivers ("Windows Mobile Device Center" current version is 6.1). Download Link

After all drivers were installed, plug the bluetooth adapter into PC. Windows should install all required drivers. If drivers were not installed automatically then install them manually.

  • Right click on "bluetooth system tray" icon. Click "Add Device".

  • Pick the correct device

  • Approve the pin code on the device.

  • Install the device (mobile) drivers to the PC. Double check: right click "bluetooth tray icon" -> "Show bluetooth devices" -> "Right click device" -> "Properties" -> "Hardware" tab. All items in the list should be "ok" (no red and yellow icons). If there are problems with drivers then install them next way.

  • Go to "Device Manager" from "Control Panel" or just right-click on Computer Icon and choose "Properties" and then click on "Device Manager".

  • You'll see an "Unknown Device" named something like "Bluetooth Peripheral Device".

  • Right-Click it and click on "Update Driver Software" or anyway you find it easy to bring up the Update driver window.

  • Click "Browse My Computer for Driver Software" button.

  • Click "Let Me Pick from a List of Device Drivers on my computer".

  • Select "Bluetooth Radio" from the list if it asked you to select and then in the next window, it will show a list of drivers with Company Names in one list and Drivers in another. In the Company List choose "Microsoft Corporation", not only Microsoft.

  • From the drivers list there may be one or more drivers with the name "Windows Mobile-Based Device Support" with different driver versions. Select one or the latest.

  • Ignore any warnings and keep pressing next and then Finish at last. If all goes well, the last screen will show the message that device driver is successfully installed.

After all drivers has been installed allow SyncProxy service:

  • On the device try to add bluetooth session in the SPT. It will not succeed. It will just wait.
  • Configure access on the PC: "Bluetooth tray icon" -> "Show bluetooth devices" -> "Right click device" -> "Properties" -> "Services" -> check "SyncProxy" -> "Apply"
  • After "SyncProxy" was added there will appear new device without driver. Add driver for this device as was described above.

After all drivers were installed and "SyncProxy" service was allowed the SPT will be able to connect to the SDL.

There should be one paired device.

##Tested and expected to work on next devices:

  • Alcatel OneTouch
  • Acer S500
  • Nexus 4
Add a custom footer
Add a custom sidebar
Clone this wiki locally