Add improved support for packaging CloudStack for CentOS 7 #46
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Member
|
Looks good, but I see most of the scripts in the new centos7 packaging is the same including systemd init scripts, why not use ifs and elses? I'm interested because now ShapeBlue hosts the packages repository and with this change we'll have to maintain 4 different rpm repos. |
Contributor
Author
|
@bhaisaab some of the files still need to be replaced, like the init scripts for the other services. They are copied for now and will be replaced by cents 7 counter parts later. Most of the other files have had changes and a lot of files were actually removed or replaced by files without parameters (as most of the files were generated using replace.properties). I actually started working with the if and else, but it turned out there is too many of them to keep the logic readable for others. Also note that in the spec file a lot of the upgrade code has been removed. As this will be the first packages made for CentOS 7 so we don't need a lot of the scripting to upgrade from really old versions of cloudstack to a new version (packaging wise, upgrade inside cloudstack is a different matter) All in all i hope that you'll find the centos7 packaging a lot cleaner when compared to the centos63 one. |
Contributor
|
Already a commit is pushed to support RHEL7 build/install at "7ea7deded031b43042c68db0f7c5c6c8b21c18c2" on mater. Any problems with that commit? |
Contributor
Author
|
@damodarreddy That commit is good, but incomplete. I used that as the basis for this commit, but there are so many small changes between centos 6 and centos 7, that a simple if-then-else would not work. It would become unreadable. Another thing is that the old rpms have a lot of legacy code to deal with upgrades of older packages. For CentOS 7 we don't need that and would only cause more problems. So in short, yes that commit was good and hopefully i have improved on that commit with this extension. |
Contributor
Author
|
@bhaisaab @damodarreddy @wilderrodrigues To be clear, any objections to merging this? The jenkins build is here, as travis does not do packaging: http://jenkins.buildacloud.org/job/package-centos7-test/ |
hubot
force-pushed
the
feature/centos7-rpm
branch
from
b249c91 to
870ede5
Compare
Contributor
|
on no word the coming 24h I'll do the honours. |
Contributor
|
No objections... |
Contributor
|
No Objections |
rohityadavcloud
pushed a commit
that referenced
this pull request
Jan 20, 2021
Fixes #46 Signed-off-by: Rohit Yadav <[email protected]>
Pearl1594
added a commit
that referenced
this pull request
Feb 24, 2025
* Support updating VPC Source NAT IP * Optimize code * Update source NAT IP
Pearl1594
added a commit
that referenced
this pull request
Feb 28, 2025
* Support updating VPC Source NAT IP * Optimize code * Update source NAT IP
Pearl1594
added a commit
that referenced
this pull request
Mar 5, 2025
* Support updating VPC Source NAT IP * Optimize code * Update source NAT IP
Pearl1594
added a commit
that referenced
this pull request
Jun 24, 2025
* Add Netris module and Add netris provider * Fix * Add Netris Provider to the zone creation wizard * add steps to zone wizard for adding netris controller and public traffic * cleanup * Add missing config key * Add routed mode offerings for Netris VPC (#3) * Add routed mode offerings for Netris VPC * update vpc offering name * generalize the offering creation method for network providers * log * remove debug log * fix failing build * Add dependency and Netris API client (#4) * Add dependency and first approach to Netris API client * Fix authentication and create Netris API client, in progress sites listing * Fix get sites * Support for listing VPCs (#5) * List tenants * Delegate API classes creation to the SDK and simply invoke the desired API class through CloudStack (#7) * Delegate API classes creation to the SDK and simply invoke the desired API class through CloudStack * Pass default auth scheme for now * Support adding netris provider to CloudStack and Netris VPC Creation (#6) * Support adding netris provider to CloudStack * revert marvin change * add license and perform session check when provider is added * add license and remove unused import * fix build failure - uunused imports * address comments * fix provider name * add Netris network element * add license * Add netris management APIs and netris service provider * add license * revert change * remove other network elements from Netris element * fix api name in doc generator * remove logs * move session alive check to CheckHealthCommand exec * Fix zone creation wizard to configure netris provider * Upgrade GSON version - from PR 8756 * Add additional parametes to the add Netris provider API * add netris as a host * add additional params to the resoponse and update UI * Rename site to site_name * Create Netris VPC (#8) * Delegate API classes creation to the SDK and simply invoke the desired API class through CloudStack (#7) * Delegate API classes creation to the SDK and simply invoke the desired API class through CloudStack * Pass default auth scheme for now * Drop for_nsx and for_tungten columns in favour of checking the provider on the ntwserviceprovider map table * Remove missing setForTungsten occurrence * Remove forNsx from VPC offerings * Create Netris VPC * Fix VPC offerings listing and remove unused dao * Create VPC fixes * Upgrade GSON version - from PR 8756 * Fix VPC creation response by using the latest SDK code * Fix unit test * Remove unused import * Fix NSX unit tests after refactoring * Add Netris key to the VLAN Details table (#10) * Add Netris key to the VLAN Details table * update for_<provider> column to be generic * Fix VPC and add IPAM allocation for the VPC CIDR (#9) * Fix VPC and add IPAM allocation for the VPC CIDR * Remove VPC logic * Use zoneId accountId and domainId on resources creation * Fix naming * Fix VR public nic issue * Fix Netris Public IP for VPC source NAT allocation * Add Netris VPC Subnets and vNets (#11) * Add Netris VPC Subnets and vNets * fix compilation errors * Add netris subnet * refactor naming convention to differentiate between VPC tiers and Isolated networks * revert marvin change * fix constructor - build failure * Add support to filter netris offerings, delete netris provider when zone is being deleted * Fix build * Fix VPC creation * Fix vnet creation * unnecesary log --------- Co-authored-by: nvazquez <[email protected]> --------- Co-authored-by: Pearl Dsilva <[email protected]> --------- Co-authored-by: nvazquez <[email protected]> * Fix unit tests * Add support to delete VNets and Subnets (#13) * Add support to delete VNets and Subnets * Add support to delete vnet resources * Add support to delete vnet resources * extract code to method --------- Co-authored-by: nvazquez <[email protected]> * Add missing suffix return (#14) * Set up Netris Public range on new zone addition (#15) * Set up Netris Public range on new zone addition * Add dependency to calculate subnet containing a start and end IP * Remove unused import * Move dependency to the netris module * Rename Netris IP range * Refactor logic * Revert "Refactor logic" This reverts commit 7ec36a81320444c37e7bb914dd895060b663411b. * Fix setup range after adding Netris Provider * Fix VXLAN range adding on zone creation * Pass VXLAN ID during creation of Netris vNets (#16) * add zone params to accepts management vnet * Release vxlan associated to the netris broadcast domain type * handle update network broadcast uri * Update Subnet purpose for Netris Public Traffic (#17) * Update Subnet purpose for Netris Public Traffic * search for existing subnet of common purpose type * Fix VR Public IP address (#20) * Fix VR Public IP address * Do not set the Public IP range on Netris side that is not part of the Netris IP Public Pool * Leave only systemvms tag for the first element * Fix NSX compatibility * Pass network gateway instead of network CIDR for Netris vNet creation (#21) * Run moodifyvxlan script if broadcast domain type is Netris (#18) * Add support to create Netris VPC / Network offerings (#22) * Add support to create Netris VPC / Network offerings * fix support services for netris provider type * Phase4 - Add support for Source NAT, Static NAT and Port Forwarding (#19) * Run moodifyvxlan script if broadcast domain type is Netris * Add Netris NAT offerings * Add support to add Source nat rules for Natted offering * fix api params while creating Netris source NAT rule * Add support to add and delete source nat rule on netris * Add support to create /32 NAT subnet * Add support to add and delete Static NAT rules in Netris (#23) * Add support to add and delete Static NAT rules in Netris * fix static nat creation on netris & removal of subnet on deletion of static nat rule * remove nat subnet after deltion of the static nat rule * add check to see if subnet already exists and add license header * Add port forwarding rules as DNAT rules in Netris (#24) * Add port forwarding rules as DNAT rules in Netris * Fixes * Allow removing DNAT rules * Fixes * Fix subnet search * Fix update SNAT only for SNAT rules * Address comments * Fix * Fix netris pom xml * Fix SNAT rule creation * Fix IP and port placements (#27) * Fix IP and port placements * fix dnat to IP for PF rules * change dnatport --------- Co-authored-by: Nicolas Vazquez <[email protected]> * List only Netris Public IPs for NAT operations (#26) * List only Netris Public IPs for NAT operations * rename getter and change type * fix failing unit tests * list all IPs if forProvider is not passed * fix list public IPs for external providers with additional IP range * filter provider Ips in a zone with external provider setup * Prevent acquiring IP that is not from the external provider range * formating --------- Co-authored-by: nvazquez <[email protected]> * Support to pass provider when creating public ip range and create IPAM on Netris (#28) * UI: support to pass provider when creating public ip range * prevent adding public ip range for a provider that isnt supported in zone * Create public range on Netris when created on CloudStack --------- Co-authored-by: nvazquez <[email protected]> * Revert UI filtration for public IPs (#29) * Fix issue with pagination of public addresses listed after filtering for external providers * Revert UI filteration for public IPs for external network provider enabled zones * Fix unit tests (#30) * Add Netris Tag parameter to the Network provider and fix zone creation wizard (#33) * Add Netris Tag parameter to the Network provider * remove unused import * Fix public IP ranges creation on zone creation (#34) * use single quotes --------- Co-authored-by: Nicolas Vazquez <[email protected]> * Fix SourceAddress for SNAt to VPC cidr (#35) * Fix VPC/network offering service list for external network providers in Routed mode (#32) * Fix network offering service list for external network providers in Routed mode * filter out unsupported services based on network mode * fix supported services list for vpc offering for external providers in Routed mode * Add support to add and delete and update static routes on Netris (#37) * Add support to add static routes in Netris * support to delete static routes on netris * add defensive check for nextHop * Add support to update static routes * add state * pass empty list for switched to avoid timeout * Netris: search static route by name and next hop if exists --------- Co-authored-by: Wei Zhou <[email protected]> * Netris FR1b: Support Remote Access VPN and Site-to-Site VPN in VPC VR (#41) * Static Routes: support nexthop * Update api/src/main/java/org/apache/cloudstack/api/command/user/vpc/CreateStaticRouteCmd.java Co-authored-by: Pearl Dsilva <[email protected]> * PR#10064 VR: apply iptables rules when add/remove static routes * PR#10065 UI: fix cannot open 'Edit tags' modal for static routes * PR#10066 Static Routes: fix check on wrong global configuration * PR#10067 VR: fix site-2-site VPN if split connections is enabled * PR#10081 server: do not allocate nic on public network for NSX VPC VR * PR#10082 UI: create VPC network offering with conserve mode * PR#10083 VR: allow outgoing traffic from RAS/VPN clients * PR#10086 server: fix typo removeaccessvpn in VirtualRouterElement * server: Add check on Public IP for remote access VPN * Revert "PR#10083 VR: allow outgoing traffic from RAS/VPN clients" This reverts commit 2f9b9f428947cac91de322fbdf4a980902a1c0a0. * VPC: fetch same used IP for domain router if VR is not Source NAT * VR: pass has_public_network to VR and configure RA/S2S VPN left peers * Revert "PR#10081 server: do not allocate nic on public network for NSX VPC VR" This reverts commit 809e269ed6b361d9df1fcef6537762c5612863e0. * VPC: fetch same used IP for domain router if VR is not Source NAT (v2) * VR: fix /etc/hosts and nameservers in dnsmasq.conf if VPC VR is not guest gateway prior to this PR ``` root@r-1167-VM:~# cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 r-1167-VM ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters 172.21.1.33 dummy-vpc-vpn-001 172.21.1.1 r-1167-VM data-server root@r-1167-VM:~# cat /etc/dnsmasq.d/cloud.conf dhcp-hostsfile=/etc/dhcphosts.txt listen-address=127.0.0.1,172.21.1.234 dhcp-range=set:interface-eth1-0,172.21.1.234,static dhcp-option=tag:interface-eth1-0,15,cs2cloud.internal dhcp-option=tag:interface-eth1-0,6,172.21.1.1,10.0.32.1,8.8.8.8 dhcp-option=tag:interface-eth1-0,3,172.21.1.1 dhcp-option=eth1,26,1500 dhcp-option=tag:interface-eth1-0,1,255.255.255.0 ``` the lines should be ``` 172.21.1.234 r-1167-VM data-server dhcp-option=tag:interface-eth1-0,6,10.0.32.1,8.8.8.8 ``` * server: Enable static NAT for Domain router if it is not Source NAT * server: Enable static NAT for Domain router on UI * server: assign Public IP to VPC VR and enable static nat if VR is not Source NAT * server: configure dns1 if VR is not Source NAT * server: remove check on Firewall service when list network service providers * UI: remove dot from message.enabled.vpn * systemvm: add default route via first guest gateway if VR does not have public IP/interface * VR: add fw_dhcpserver for shared network * VR: pass has_public_network to VR and configure RA/S2S VPN left peers (v2) * UI: fix request error when create a VPC tier in a non-Netris/NSX env * systemvm: add default route via first guest gateway (v2) * VR: configure iptables rules for S2S vpn on first guest interface * VR: allow FORWARD to guest interfaces if VR is not Public * VR: configure remote access vpn on first guest interface if not public * VR: fix error 789 in RA VPN client when both RA and S2S are configured * server: Apply Static Route for RA/S2S VPN in VPC VR * VR: do not set mark for Public interface when VR is not really public * VPN: do not disable static nat if it is used by a RA/S2S VPN * server: skip check on network conserve mode if disable/enable RA VPN on Router IP * server: set forRouter to false when release a IP * VR: diable IP spoofing protection on default guest network * VR: fix iptables rules only when only S2S vpn is enabled * UI: show 'VPN Connections' section * VPC: new methods to configure/reconfigure Static NAT for VPC VR * API: set Type in ip address response to DomainRouter if it is used by VR * server: do not allow IP release if it is used by RA or S2S VPN gateway * VR: check if interface is added * VR: add default route only when ip is associated to first guest interface * VR: fix ipsec conf for l2tp and s2s vpn * server: save placeholder IP for VPC VR to fix the new VR IP when vpc tier is auto-shutdown * server: get non-placeholder NIC for VPC VR * VR: wait 15 seconds after starting password server * server: fix unable to configure static nat due to 'invalid virtual machine id' * UI: fix link of router in info card * VPC: apply static route for VPC VPN if needed (refactoring) * server: fix VR IP of first VPC tier is the VM gateway * server: update or remove all existing static routes when shutdown a network * server: update ipaddress after disabling static nat to fix vpc deletion issue * servr: disable remote access VPN as part of VPC dstroy * server: apply static routes when implement a vpc tier * server: apply static routes even if next hop is null * server: fix Cannot invoke "com.cloud.vm.NicProfile.getRequestedIPv4()" because "requested" is null * Netris: Update Vpn provider to VpcVirtualRouter * Netris: Add Vpn service to network offerings and networks * server: fix CIDR of VPN ip range * server: set isVrGuestGateway by SoureNat/Gateway service with Provider.VPCVirtualRouter * VR: password server takes 10-15 seconds to start if VR IP is not configured in /etc/hosts * Netris: add back routesPutBody.setStateStatus * engine/schema: remove SQL changes in schema-41910to42000.sql --------- Co-authored-by: Pearl Dsilva <[email protected]> * Add support for Gateway service for Netris VPC and network offerings (#39) * Add support for Gateway service for Netris VPC and network offerings * Restore UserData service * add gateway only to vpc service * Add support for gateway service for external network providers for networks in routed mode * add support for gateway svc * Revert "add support for gateway svc" This reverts commit 06645cd1c6d08a81ede5d1431497ea3f2efdc5dc. * Fix VPC offering creation * Fix VR public NIC after Gateway service is set to Netris --------- Co-authored-by: nvazquez <[email protected]> * Netris VPN: Fix s2s vpn status update and isolated network implementation (#42) * server: fix NPE when deploy vm on isolated network * vpn: fix s2s vpn status is not updated Prior to this fix ``` java.lang.IllegalArgumentException: Class com.cloud.agent.api.CheckS2SVpnConnectionsAnswer declares multiple JSON fields named 'details'; conflict is caused by fields com.cloud.agent.api.CheckS2SVpnConnectionsAnswer#details and com.cloud.agent.api.Answer#details at com.cloud.agent.transport.ResponseTest.testCheckS2SVpnConnectionsAnswer(ResponseTest.java:42) ``` * test: fix test_01_vpn_usage as now it is only possible to create VPN on Source NAT if it uses VR * VR: fix unable to create remote access VPN on regular isolated network the error is ``` File "/opt/cloud/bin/configure.py", line 1242, in process self.remoteaccessvpn_iptables(self.dbag['public_interface'], public_ip, self.dbag[public_ip]) ~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ KeyError: 'public_interface' ``` * Release NAT IP subnet when VPC is removed or IP is released (#44) * Release NAT IP subnet when VPC is removed or IP is released * add license * Add support to add IPv6 Public IP range as IPAM Allocation / Subnet on Netris (#36) * Add support to add IPv6 Public IP range as IPAM Allocation / Subnet on Netris * Add ipam alloc and subnet for the ipv6 subnet associated to the vpc tier network * remove commented code * Phase5 - Support for ACLs in Netris (#31) * Add support for Netris ACLs * acl support * Make acl api call to netris to create the rule * refactor add acl rule to populate the right fields * support icmp type acl rule * acl rule creation - move netrisnetworkRule * Update ACL naming on Netris * Add support for Deletion of netris acls * Add support to delete and re-order ACL rules * support creation of default acl rules and replacing acl rules * fix NSXNetworkRule * Add global routing flag on subnet creation (#45) * Support change snat ip (#46) * Support updating VPC Source NAT IP * Optimize code * Update source NAT IP * Fix naming convention for NAT subnets to follow other resources (#47) * Fix naming convention for NAT subnets to follow other resources * Use vpc ID for nat subnets * Use new nat subnet name for deletion of static nat rule * fix naming convevntion for nat subnet * Keep Vpn service to default VPC offering with Natted mode only (#50) * Add Vpn service to default VPC offering with Routed mode * Revert change on VPC offering and fix VPN service only for Netris NAT mode * Validate if given CIDR belongs to a bigger allocation in Netris before creating the zone-level allocation (#48) * Validate if given CIDR belongs to a bigger allocation in Netris before creating * rename method * Phase5 - Support for LB - create, delete and Update operations (#49) * Add support for Netris ACLs * acl support * Make acl api call to netris to create the rule * refactor add acl rule to populate the right fields * support icmp type acl rule * acl rule creation - move netrisnetworkRule * Update ACL naming on Netris * Add support for Deletion of netris acls * Add support to delete and re-order ACL rules * support creation of default acl rules and replacing acl rules * fix NSXNetworkRule * Fix naming convention for NAT subnets to follow other resources * Use vpc ID for nat subnets * Phase5 - Support for LB - create, delete and Update operations * Use new nat subnet name for deletion of static nat rule * add support to add netris lb rule * support deletion of LB rule on Netris * add checks when editing unsupported fields of LB rule for Netris and hide columns on the UI * fix test failure * fix imports * add license * address comments * Enable Autoscaling on Netris for CPU and memory (#51) * Enable Autoscaling on Netris for CPU and memory * Fix monitor autoscale group and cleanup * Rename autoscaling group method * Integrate Autoscaling by allowing to update LB rules * Refactor according to the SDK changes * Fix the test failures noticed on #44 (#52) * Increase code coverage (#54) * Increase code coverage * More unit tests * Remove credentials and mock api client * NetrisResource tests * Fix unit test * Add support to add and remove ACL rules when CIDR list is passed when creating LB rules (#53) * Add support to add and remove ACL rules when CIDR list is passed when creating LB rules * add deny all rule * delete the deny rule as well * Fix build (#57) * Prevent Index Out of Bounds exception when naming IPAM subnets (#58) * Prevent Index Out of Bounds exception when naming IPAM subnets * fix linter * Delete netris IPv6 subnet (#59) * Netris VPN: add static route when update a non-existent static route (#60) * Fix VPC tier creation failure - prevent creating IPv6 IPAM allocation if it already exists (#61) * Update netris VPC and tier name (#56) * Update netris VPC and tier name * add support to update vpc tier name * add license * support editing names of dual stack VPCs * VR/server: configure default gateway and RA/S2S VPN on the IP/interface with minimum network_id (#43) * server: fix NPE when deploy vm on isolated network * vpn: fix s2s vpn status is not updated Prior to this fix ``` java.lang.IllegalArgumentException: Class com.cloud.agent.api.CheckS2SVpnConnectionsAnswer declares multiple JSON fields named 'details'; conflict is caused by fields com.cloud.agent.api.CheckS2SVpnConnectionsAnswer#details and com.cloud.agent.api.Answer#details at com.cloud.agent.transport.ResponseTest.testCheckS2SVpnConnectionsAnswer(ResponseTest.java:42) ``` * test: fix test_01_vpn_usage as now it is only possible to create VPN on Source NAT if it uses VR * VR: fix unable to create remote access VPN on regular isolated network the error is ``` File "/opt/cloud/bin/configure.py", line 1242, in process self.remoteaccessvpn_iptables(self.dbag['public_interface'], public_ip, self.dbag[public_ip]) ~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ KeyError: 'public_interface' ``` * VR/server: configure default gateway and RA/S2S VPN on the IP/interface with minimum network_id * Don't add deny rule if no CIDR list is passed (#62) * Hide the Stickiness Configure button for Netris Load Balancers (#72) * Update IPAM subnet purpose to nat before NAT operations if its different (#71) * Netris VPN: create vpc gateway with specified IP (#63) * Netris: fix UnsupportedOperationException when create VPC offering with NATTED mode (#75) fixes ``` 2025-03-21T10:42:55,039 ERROR [c.c.a.ApiServer] (qtp1513608173-21:[ctx-f9c7f002, ctx-bcfe846d]) (logid:e12e798f) unhandled exception executing api command: [Ljava.lang.String;@3a1416cd java.lang.UnsupportedOperationException at java.base/java.util.AbstractList.add(AbstractList.java:153) at java.base/java.util.AbstractList.add(AbstractList.java:111) at org.apache.cloudstack.api.command.admin.vpc.CreateVPCOfferingCmd.getServiceProviderMapForExternalProvider(CreateVPCOfferingCmd.java:248) ``` * [UI] Zone wizard creation improvements - rename hostname to url and remove port for Netris Provider (#77) * [UI] Zone wizard creation improvements - rename hostname to url and remove port for Netris Provider * Fix schema column for url instead of hostname * Fix Static NAT rules naming (#83) * Netris: create VPN gateway with specified public IP on UI (#82) * Netris vpn: apply static routes when start or delete a VPN connection (#85) * Netris VPN: apply static routes when start S2S VPN * Netris: list static routes and revoke the routes which are not needed * Netris: use route name (x.x.x.0/x) instead of prefix (x.x.x.0) and get clean cidr list * Netris VPN: fix NPE when list static routes * Update plugins/network-elements/netris/src/main/java/org/apache/cloudstack/service/NetrisApiClientImpl.java * Delete IPv6 allocation after tier removal on VPC with dual stack offering (#86) * Netris pass v6 gateway (#87) * pass v6 gateway to netris * pass v6 gateway to netris * refactor to address comments * remove imports * [VR] Fix IPv6 NIC IP on the VR (#89) * Add support to edit ACL rules (#74) * Add support to edit ACL rules * add support to update acl rules * remove test file * VR: advertise SLAAC prefix only if VR is gateway (#91) * Make reorder ACL items invoke Netris controller (#90) * VR: fix radvd misconfiguration for non-netris env (#92) * [VR] Fix object comparisson to string comparisson on python (#93) * Fix unit tests for ACL (#94) * Use the previously assigned vNet for Netris Network when it transitions to Implemented state after gc (#88) * Use the previously assigned vNet for Netris Network when it transitions to Implemented state after gc * Fix unit tests --------- Co-authored-by: nvazquez <[email protected]> --------- Co-authored-by: Pearl Dsilva <[email protected]> Co-authored-by: Wei Zhou <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
6 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This feature splits the packaging for CentOS 6 and CentOS 7 again. With the introduction of tomcat7 and systemd to much changes to keep it in the same spec.
Move the package command to a higher level directory and added an option to specify for which platform to build (-d centos7|centos63).
Tested by creating a management server using the RPMs and configuring cloudstack to run with Xenserver (6.4.99). This pretty much checks startup and the ability to do database upgrades and find hypervisor scripts.