Support WHERE, ORDER BY, LIMIT, SELECT, EXTEND pipe operators

datafusion/sql/src/query.rs

@@ -21,14 +21,15 @@ use crate::planner::{ContextProvider, PlannerContext, SqlToRel};
 
 use crate::stack::StackGuard;
 use datafusion_common::{not_impl_err, Constraints, DFSchema, Result};
-use datafusion_expr::expr::Sort;
+use datafusion_expr::expr::{Sort, WildcardOptions};
 
+use datafusion_expr::select_expr::SelectExpr;
 use datafusion_expr::{
     CreateMemoryTable, DdlStatement, Distinct, Expr, LogicalPlan, LogicalPlanBuilder,
 };
 use sqlparser::ast::{
-    Expr as SQLExpr, Ident, LimitClause, OrderBy, OrderByExpr, OrderByKind, Query,
-    SelectInto, SetExpr,
+    Expr as SQLExpr, Ident, LimitClause, Offset, OffsetRows, OrderBy, OrderByExpr,
+    OrderByKind, PipeOperator, Query, SelectInto, SetExpr,
 };
 use sqlparser::tokenizer::Span;
 
@@ -49,7 +50,7 @@ impl<S: ContextProvider> SqlToRel<'_, S> {
         }
 
         let set_expr = *query.body;
-        match set_expr {
+        let plan = match set_expr {
             SetExpr::Select(mut select) => {
                 let select_into = select.into.take();
                 let plan =
@@ -78,6 +79,75 @@ impl<S: ContextProvider> SqlToRel<'_, S> {
                 let plan = self.order_by(plan, order_by_rex)?;
                 self.limit(plan, query.limit_clause, planner_context)
             }
+        }?;
+
+        self.pipe_operators(plan, query.pipe_operators, planner_context)
+    }
+
+    /// Apply pipe operators to a plan
+    fn pipe_operators(
+        &self,
+        mut plan: LogicalPlan,
+        pipe_operators: Vec<PipeOperator>,
+        planner_context: &mut PlannerContext,
+    ) -> Result<LogicalPlan> {
+        for pipe_operator in pipe_operators {
+            plan = self.pipe_operator(plan, pipe_operator, planner_context)?;
+        }
+        Ok(plan)
+    }
+
+    /// Apply a pipe operator to a plan
+    fn pipe_operator(
+        &self,
+        plan: LogicalPlan,
+        pipe_operator: PipeOperator,
+        planner_context: &mut PlannerContext,
+    ) -> Result<LogicalPlan> {
+        match pipe_operator {
+            PipeOperator::Where { expr } => {
+                self.plan_selection(Some(expr), plan, planner_context)
+            }
+            PipeOperator::OrderBy { exprs } => {
+                let sort_exprs = self.order_by_to_sort_expr(
+                    exprs,
+                    plan.schema(),
+                    planner_context,
+                    true,
+                    None,
+                )?;
+                self.order_by(plan, sort_exprs)
+            }
+            PipeOperator::Limit { expr, offset } => self.limit(
+                plan,
+                Some(LimitClause::LimitOffset {
+                    limit: Some(expr),
+                    offset: offset.map(|offset| Offset {
+                        value: offset,
+                        rows: OffsetRows::None,
+                    }),
+                    limit_by: vec![],
+                }),
+                planner_context,
+            ),
+            PipeOperator::Select { exprs } => {
+                let empty_from = matches!(plan, LogicalPlan::EmptyRelation(_));
+                let select_exprs =
+                    self.prepare_select_exprs(&plan, exprs, empty_from, planner_context)?;
+                self.project(plan, select_exprs)
+            }
+            PipeOperator::Extend { exprs } => {
+                let empty_from = matches!(plan, LogicalPlan::EmptyRelation(_));
+                let extend_exprs =
+                    self.prepare_select_exprs(&plan, exprs, empty_from, planner_context)?;
+                let all_exprs =
+                    std::iter::once(SelectExpr::Wildcard(WildcardOptions::default()))
+                        .chain(extend_exprs)
+                        .collect();
+                self.project(plan, all_exprs)
+            }
+
+            x => not_impl_err!("`{x}` pipe operator is not supported yet"),
         }
     }
 

datafusion/sql/src/select.rs

@@ -585,7 +585,7 @@ impl<S: ContextProvider> SqlToRel<'_, S> {
         Ok((intermediate_plan, intermediate_select_exprs))
     }
 
-    fn plan_selection(
+    pub(crate) fn plan_selection(
         &self,
         selection: Option<SQLExpr>,
         plan: LogicalPlan,
@@ -666,7 +666,7 @@ impl<S: ContextProvider> SqlToRel<'_, S> {
     }
 
     /// Returns the `Expr`'s corresponding to a SQL query's SELECT expressions.
-    fn prepare_select_exprs(
+    pub(crate) fn prepare_select_exprs(
         &self,
         plan: &LogicalPlan,
         projection: Vec<SelectItem>,
@@ -826,7 +826,11 @@ impl<S: ContextProvider> SqlToRel<'_, S> {
     }
 
     /// Wrap a plan in a projection
-    fn project(&self, input: LogicalPlan, expr: Vec<SelectExpr>) -> Result<LogicalPlan> {
+    pub(crate) fn project(
+        &self,
+        input: LogicalPlan,
+        expr: Vec<SelectExpr>,
+    ) -> Result<LogicalPlan> {
         // convert to Expr for validate_schema_satisfies_exprs
         let exprs = expr
             .iter()

datafusion/sqllogictest/test_files/pipe_operator.slt

@@ -0,0 +1,91 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+# BigQuery supports the pipe operator syntax
+# TODO: Make the Generic dialect support the pipe operator syntax
+statement ok
+set datafusion.sql_parser.dialect = 'BigQuery';
+
+statement ok
+CREATE TABLE test(
+    a INT,
+    b FLOAT,
+    c VARCHAR,
+    n VARCHAR
+) AS VALUES
+  (1, 1.1, 'a', NULL),
+  (2, 2.2, 'b', NULL),
+  (3, 3.3, 'c', NULL)
+;
+
+# WHERE pipe
+query IRTT
+SELECT *
+FROM test
+|> WHERE a > 1
+----
+2 2.2 b NULL
+3 3.3 c NULL
+
+# ORDER BY pipe
+query IRTT
+SELECT *
+FROM test
+|> ORDER BY a DESC
+----
+3 3.3 c NULL
+2 2.2 b NULL
+1 1.1 a NULL
+
+# ORDER BY pipe, limit
+query IRTT
+SELECT *
+FROM test
+|> ORDER BY a DESC
+|> LIMIT 1
+----
+3 3.3 c NULL
+
+# SELECT pipe
+query I
+SELECT *
+FROM test
+|> SELECT a
+----
+1
+2
+3
+
+# EXTEND pipe
+query IRR
+SELECT *
+FROM test
+|> SELECT a, b
+|> EXTEND a + b AS a_plus_b
+----
+1 1.1 2.1
+2 2.2 4.2
+3 3.3 6.3
+
+query IRR
+SELECT *
+FROM test
+|> SELECT a, b
+|> where a = 1
+|> EXTEND a + b AS a_plus_b
+----
+1 1.1 2.1

docs/source/user-guide/sql/select.md

@@ -40,6 +40,7 @@ DataFusion supports the following syntax for queries:
 [ [ORDER BY](#order-by-clause) expression [ ASC | DESC ][, ...] ] <br/>
 [ [LIMIT](#limit-clause) count ] <br/>
 [ [EXCLUDE | EXCEPT](#exclude-and-except-clause) ] <br/>
+[Pipe operators](#pipe-operators) <br/>
 
 </code>
 
@@ -327,3 +328,98 @@ FROM table;
 SELECT * EXCLUDE(age, person)
 FROM table;
 ```
+
+## Pipe operators
+
+Some SQL dialects (e.g. BigQuery) support the pipe operator `|>`.
+The SQL dialect can be set like this:
+
+```sql
+set datafusion.sql_parser.dialect = 'BigQuery';
+```
+
+DataFusion currently supports the following pipe operators:
+
+- [WHERE](#pipe_where)
+- [ORDER BY](#pipe_order_by)
+- [LIMIT](#pipe_limit)
+- [SELECT](#pipe_select)
+- [EXTEND](#pipe_extend)
+
+(pipe_where)=
+
+### WHERE
+
+```sql
+select * from range(0,10)
+|> where value < 2;
++-------+
+| value |
++-------+
+| 0     |
+| 1     |
++-------+
+```
+
+(pipe_order_by)=
+
+### ORDER BY
+
+```sql
+select * from range(0,3)
+|> order by value desc;
++-------+
+| value |
++-------+
+| 2     |
+| 1     |
+| 0     |
++-------+
+```
+
+(pipe_limit)=
+
+### LIMIT
+
+```sql
+select * from range(0,3)
+|> order by value desc
+|> limit 1;
++-------+
+| value |
++-------+
+| 2     |
++-------+
+```
+
+(pipe_select)=
+
+### SELECT
+
+```sql
+select * from range(0,3)
+|> select value + 10;
++---------------------------+
+| range().value + Int64(10) |
++---------------------------+
+| 10                        |
+| 11                        |
+| 12                        |
++---------------------------+
+```
+
+(pipe_extend)=
+
+### EXTEND
+
+```sql
+select * from range(0,3)
+|> extend -value AS minus_value;
++-------+-------------+
+| value | minus_value |
++-------+-------------+
+| 0     | 0           |
+| 1     | -1          |
+| 2     | -2          |
++-------+-------------+
+```