Update README #4

IdanKoblik · 2021-12-26T15:36:31Z

No description provided.

Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } Fixes: d3316c8 ("btrfs: Properly handle backref_in_log retval") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Jianglei Nie <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae0389 ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Exynos850 SoC has two CPU clusters: - cluster 0: contains CPUs #0, #1, #2, #3 - cluster 1: contains CPUs #4, #5, #6, #7 Each cluster has its own dedicated watchdog timer. Those WDT instances are controlled using different bits in PMU registers, new "samsung,index" property is added to tell the driver which bits to use for defined watchdog node. Also on Exynos850 the peripheral clock and the source clock are two different clocks. Provide a way to specify two clocks in watchdog device tree node. Signed-off-by: Sam Protsenko <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>

If the key is already present then free the key used for lookup. Found with: $ perf stat -M IO_Read_BW /bin/true ==1749112==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 4 object(s) allocated from: #0 0x7f6f6fa7d7cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55acecd9d7a6 in check_per_pkg util/stat.c:343 #2 0x55acecd9d9c5 in process_counter_values util/stat.c:365 #3 0x55acecd9e0ab in process_counter_maps util/stat.c:421 #4 0x55acecd9e292 in perf_stat_process_counter util/stat.c:443 #5 0x55aceca8553e in read_counters ./tools/perf/builtin-stat.c:470 #6 0x55aceca88fe3 in __run_perf_stat ./tools/perf/builtin-stat.c:1023 #7 0x55aceca89146 in run_perf_stat ./tools/perf/builtin-stat.c:1048 #8 0x55aceca90858 in cmd_stat ./tools/perf/builtin-stat.c:2555 #9 0x55acecc05fa5 in run_builtin ./tools/perf/perf.c:313 torvalds#10 0x55acecc064fe in handle_internal_command ./tools/perf/perf.c:365 torvalds#11 0x55acecc068bb in run_argv ./tools/perf/perf.c:409 torvalds#12 0x55acecc070aa in main ./tools/perf/perf.c:539 Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Vineet Singh <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, torvalds#108 ; 0x6c e1a0400 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, torvalds#144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, torvalds#108] ; 0x6c e2859014 add r9, r5, torvalds#20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, torvalds#60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, torvalds#16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, torvalds#15 e7e36655 ubfx r6, r5, torvalds#12, #4 e205a00f and sl, r5, torvalds#15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, torvalds#16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, torvalds#16] e12fff30 blx r0 e356000f cm r6, torvalds#15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, torvalds#64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support") Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]>

Change the cifs filesystem to take account of the changes to fscache's indexing rewrite and reenable caching in cifs. The following changes have been made: (1) The fscache_netfs struct is no more, and there's no need to register the filesystem as a whole. (2) The session cookie is now an fscache_volume cookie, allocated with fscache_acquire_volume(). That takes three parameters: a string representing the "volume" in the index, a string naming the cache to use (or NULL) and a u64 that conveys coherency metadata for the volume. For cifs, I've made it render the volume name string as: "cifs,<ipaddress>,<sharename>" where the sharename has '/' characters replaced with ';'. This probably needs rethinking a bit as the total name could exceed the maximum filename component length. Further, the coherency data is currently just set to 0. It needs something else doing with it - I wonder if it would suffice simply to sum the resource_id, vol_create_time and vol_serial_number or maybe hash them. (3) The fscache_cookie_def is no more and needed information is passed directly to fscache_acquire_cookie(). The cache no longer calls back into the filesystem, but rather metadata changes are indicated at other times. fscache_acquire_cookie() is passed the same keying and coherency information as before. (4) The functions to set/reset cookies are removed and fscache_use_cookie() and fscache_unuse_cookie() are used instead. fscache_use_cookie() is passed a flag to indicate if the cookie is opened for writing. fscache_unuse_cookie() is passed updates for the metadata if we changed it (ie. if the file was opened for writing). These are called when the file is opened or closed. (5) cifs_setattr_*() are made to call fscache_resize() to change the size of the cache object. (6) The functions to read and write data are stubbed out pending a conversion to use netfslib. Changes ======= ver #8: - Abstract cache invalidation into a helper function. - Fix some checkpatch warnings[3]. ver #7: - Removed the accidentally added-back call to get the super cookie in cifs_root_iget(). - Fixed the right call to cifs_fscache_get_super_cookie() to take account of the "-o fsc" mount flag. ver #6: - Moved the change of gfpflags_allow_blocking() to current_is_kswapd() for cifs here. - Fixed one of the error paths in cifs_atomic_open() to jump around the call to use the cookie. - Fixed an additional successful return in the middle of cifs_open() to use the cookie on the way out. - Only get a volume cookie (and thus inode cookies) when "-o fsc" is supplied to mount. ver #5: - Fixed a couple of bits of cookie handling[2]: - The cookie should be released in cifs_evict_inode(), not cifsFileInfo_put_final(). The cookie needs to persist beyond file closure so that writepages will be able to write to it. - fscache_use_cookie() needs to be called in cifs_atomic_open() as it is for cifs_open(). ver #4: - Fixed the use of sizeof with memset. - tcon->vol_create_time is __le64 so doesn't need cpu_to_le64(). ver #3: - Canonicalise the cifs coherency data to make the cache portable. - Set volume coherency data. ver #2: - Use gfpflags_allow_blocking() rather than using flag directly. - Upgraded to -rc4 to allow for upstream changes[1]. - fscache_acquire_volume() now returns errors. Signed-off-by: David Howells <[email protected]> Acked-by: Jeff Layton <[email protected]> cc: Steve French <[email protected]> cc: Shyam Prasad N <[email protected]> cc: [email protected] cc: [email protected] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=23b55d673d7527b093cd97b7c217c82e70cd1af0 [1] Link: https://lore.kernel.org/r/[email protected]/ [2] Link: https://lore.kernel.org/r/CAH2r5muTanw9pJqzAHd01d9A8keeChkzGsCEH6=0rHutVLAF-A@mail.gmail.com/ [3] Link: https://lore.kernel.org/r/163819671009.215744.11230627184193298714.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906982979.143852.10672081929614953210.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967187187.1823006.247415138444991444.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021579335.640689.2681324337038770579.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/[email protected]/ # v5 Link: https://lore.kernel.org/r/[email protected]/ # v6 Signed-off-by: Steve French <[email protected]>

Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer <[email protected]> Signed-off-by: John David Anglin <[email protected]> Cc: [email protected] Signed-off-by: Helge Deller <[email protected]>

When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Shyam Prasad N <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>

I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: <TASK> syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #4 - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available

Put NVMe/TCP sockets in their own class to avoid some lockdep warnings. Sockets created by nvme-tcp are not exposed to user-space, and will not trigger certain code paths that the general socket API exposes. Lockdep complains about a circular dependency between the socket and filesystem locks, because setsockopt can trigger a page fault with a socket lock held, but nvme-tcp sends requests on the socket while file system locks are held. ====================================================== WARNING: possible circular locking dependency detected 5.15.0-rc3 #1 Not tainted ------------------------------------------------------ fio/1496 is trying to acquire lock: (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80 but task is already holding lock: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs] which lock already depends on the new lock. other info that might help us debug this: chain exists of: sk_lock-AF_INET --> sb_internal --> &xfs_dir_ilock_class/5 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xfs_dir_ilock_class/5); lock(sb_internal); lock(&xfs_dir_ilock_class/5); lock(sk_lock-AF_INET); *** DEADLOCK *** 6 locks held by fio/1496: #0: (sb_writers#13){.+.+}-{0:0}, at: path_openat+0x9fc/0xa20 #1: (&inode->i_sb->s_type->i_mutex_dir_key){++++}-{3:3}, at: path_openat+0x296/0xa20 #2: (sb_internal){.+.+}-{0:0}, at: xfs_trans_alloc_icreate+0x41/0xd0 [xfs] #3: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs] #4: (hctx->srcu){....}-{0:0}, at: hctx_lock+0x51/0xd0 #5: (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0x33e/0x380 [nvme_tcp] This annotation lets lockdep analyze nvme-tcp controlled sockets independently of what the user-space sockets API does. Link: https://lore.kernel.org/linux-nvme/CAHj4cs9MDYLJ+q+2_GXUK9HxFizv2pxUryUR0toX974M040z7g@mail.gmail.com/ Signed-off-by: Chris Leech <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>

Move the caps check from ceph_readahead() to ceph_init_request(), conditional on the origin being NETFS_READAHEAD so that in a future patch, ceph can point its ->readahead() vector directly at netfs_readahead(). Changes ======= ver #4) - Move the check for NETFS_READAHEAD up in ceph_init_request()[2]. ver #3) - Split from the patch to add a netfs inode context[1]. - Need to store the caps got in rreq->netfs_priv for later freeing. Signed-off-by: David Howells <[email protected]> cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected]/ [2] Link: https://lore.kernel.org/r/164692907694.2099075.10081819855690054094.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/[email protected]/ # v4

Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <[email protected]> Acked-by: Jeff Layton <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected]/ [2] Link: https://lore.kernel.org/r/[email protected]/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/[email protected]/ # v4

…e_zone btrfs_can_activate_zone() can be called with the device_list_mutex already held, which will lead to a deadlock: insert_dev_extents() // Takes device_list_mutex `-> insert_dev_extent() `-> btrfs_insert_empty_item() `-> btrfs_insert_empty_items() `-> btrfs_search_slot() `-> btrfs_cow_block() `-> __btrfs_cow_block() `-> btrfs_alloc_tree_block() `-> btrfs_reserve_extent() `-> find_free_extent() `-> find_free_extent_update_loop() `-> can_allocate_chunk() `-> btrfs_can_activate_zone() // Takes device_list_mutex again Instead of using the RCU on fs_devices->device_list we can use fs_devices->alloc_list, protected by the chunk_mutex to traverse the list of active devices. We are in the chunk allocation thread. The newer chunk allocation happens from the devices in the fs_device->alloc_list protected by the chunk_mutex. btrfs_create_chunk() lockdep_assert_held(&info->chunk_mutex); gather_device_info list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) Also, a device that reappears after the mount won't join the alloc_list yet and, it will be in the dev_list, which we don't want to consider in the context of the chunk alloc. [15.166572] WARNING: possible recursive locking detected [15.167117] 5.17.0-rc6-dennis torvalds#79 Not tainted [15.167487] -------------------------------------------- [15.167733] kworker/u8:3/146 is trying to acquire lock: [15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: find_free_extent+0x15a/0x14f0 [btrfs] [15.167733] [15.167733] but task is already holding lock: [15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs] [15.167733] [15.167733] other info that might help us debug this: [15.167733] Possible unsafe locking scenario: [15.167733] [15.171834] CPU0 [15.171834] ---- [15.171834] lock(&fs_devs->device_list_mutex); [15.171834] lock(&fs_devs->device_list_mutex); [15.171834] [15.171834] *** DEADLOCK *** [15.171834] [15.171834] May be due to missing lock nesting notation [15.171834] [15.171834] 5 locks held by kworker/u8:3/146: [15.171834] #0: ffff888100050938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0 [15.171834] #1: ffffc9000067be80 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0 [15.176244] #2: ffff88810521e620 (sb_internal){.+.+}-{0:0}, at: flush_space+0x335/0x600 [btrfs] [15.176244] #3: ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs] [15.176244] #4: ffff8881152e4b78 (btrfs-dev-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x130 [btrfs] [15.179641] [15.179641] stack backtrace: [15.179641] CPU: 1 PID: 146 Comm: kworker/u8:3 Not tainted 5.17.0-rc6-dennis torvalds#79 [15.179641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [15.179641] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [15.179641] Call Trace: [15.179641] <TASK> [15.179641] dump_stack_lvl+0x45/0x59 [15.179641] __lock_acquire.cold+0x217/0x2b2 [15.179641] lock_acquire+0xbf/0x2b0 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] __mutex_lock+0x8e/0x970 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? lock_is_held_type+0xd7/0x130 [15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] find_free_extent+0x15a/0x14f0 [btrfs] [15.183838] ? _raw_spin_unlock+0x24/0x40 [15.183838] ? btrfs_get_alloc_profile+0x106/0x230 [btrfs] [15.187601] btrfs_reserve_extent+0x131/0x260 [btrfs] [15.187601] btrfs_alloc_tree_block+0xb5/0x3b0 [btrfs] [15.187601] __btrfs_cow_block+0x138/0x600 [btrfs] [15.187601] btrfs_cow_block+0x10f/0x230 [btrfs] [15.187601] btrfs_search_slot+0x55f/0xbc0 [btrfs] [15.187601] ? lock_is_held_type+0xd7/0x130 [15.187601] btrfs_insert_empty_items+0x2d/0x60 [btrfs] [15.187601] btrfs_create_pending_block_groups+0x2b3/0x560 [btrfs] [15.187601] __btrfs_end_transaction+0x36/0x2a0 [btrfs] [15.192037] flush_space+0x374/0x600 [btrfs] [15.192037] ? find_held_lock+0x2b/0x80 [15.192037] ? btrfs_async_reclaim_data_space+0x49/0x180 [btrfs] [15.192037] ? lock_release+0x131/0x2b0 [15.192037] btrfs_async_reclaim_data_space+0x70/0x180 [btrfs] [15.192037] process_one_work+0x24c/0x5a0 [15.192037] worker_thread+0x4a/0x3d0 Fixes: a85f05e ("btrfs: zoned: avoid chunk allocation if active block group has enough space") CC: [email protected] # 5.16+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

We've got a mess on our hands. 1. xfs_trans_commit() cannot cancel transactions because the mount is shut down - that causes dirty, aborted, unlogged log items to sit unpinned in memory and potentially get written to disk before the log is shut down. Hence xfs_trans_commit() can only abort transactions when xlog_is_shutdown() is true. 2. xfs_force_shutdown() is used in places to cause the current modification to be aborted via xfs_trans_commit() because it may be impractical or impossible to cancel the transaction directly, and hence xfs_trans_commit() must cancel transactions when xfs_is_shutdown() is true in this situation. But we can't do that because of #1. 3. Log IO errors cause log shutdowns by calling xfs_force_shutdown() to shut down the mount and then the log from log IO completion. 4. xfs_force_shutdown() can result in a log force being issued, which has to wait for log IO completion before it will mark the log as shut down. If #3 races with some other shutdown trigger that runs a log force, we rely on xfs_force_shutdown() silently ignoring #3 and avoiding shutting down the log until the failed log force completes. 5. To ensure #2 always works, we have to ensure that xfs_force_shutdown() does not return until the the log is shut down. But in the case of #4, this will result in a deadlock because the log Io completion will block waiting for a log force to complete which is blocked waiting for log IO to complete.... So the very first thing we have to do here to untangle this mess is dissociate log shutdown triggers from mount shutdowns. We already have xlog_forced_shutdown, which will atomically transistion to the log a shutdown state. Due to internal asserts it cannot be called multiple times, but was done simply because the only place that could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!) and that could only call it once and once only. So the first thing we do is remove the asserts. We then convert all the internal log shutdown triggers to call xlog_force_shutdown() directly instead of xfs_force_shutdown(). This allows the log shutdown triggers to shut down the log without needing to care about mount based shutdown constraints. This means we shut down the log independently of the mount and the mount may not notice this until it's next attempt to read or modify metadata. At that point (e.g. xfs_trans_commit()) it will see that the log is shutdown, error out and shutdown the mount. To ensure that all the unmount behaviours and asserts track correctly as a result of a log shutdown, propagate the shutdown up to the mount if it is not already set. This keeps the mount and log state in sync, and saves a huge amount of hassle where code fails because of a log shutdown but only checks for mount shutdowns and hence ends up doing the wrong thing. Cleaning up that mess is an exercise for another day. This enables us to address the other problems noted above in followup patches. Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>

After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ torvalds#55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] Fixes: 3990a8f ("sfc: allocate channels for XDP tx queues") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>

As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <[email protected]> Signed-off-by: Yi Liu <[email protected]> Signed-off-by: Yi Wang <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>

…tion During a scrub, or device replace, we can race with block group removal and allocation and trigger the following assertion failure: [7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817 [7526.387351] ------------[ cut here ]------------ [7526.387373] kernel BUG at fs/btrfs/ctree.h:3599! [7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4 [7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs] [7526.393520] Code: f3 48 c7 c7 20 (...) [7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246 [7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000 [7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff [7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001 [7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800 [7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000 [7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000 [7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0 [7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7526.408169] Call Trace: [7526.408529] <TASK> [7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs] [7526.409690] ? do_wait_intr_irq+0xb0/0xb0 [7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs] [7526.410995] ? preempt_count_add+0x49/0xa0 [7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs] [7526.412278] ? __fget_files+0xc9/0x1b0 [7526.412825] ? kvm_sched_clock_read+0x14/0x40 [7526.413459] ? lock_release+0x155/0x4a0 [7526.414022] ? __x64_sys_ioctl+0x83/0xb0 [7526.414601] __x64_sys_ioctl+0x83/0xb0 [7526.415150] do_syscall_64+0x3b/0xc0 [7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae [7526.416408] RIP: 0033:0x7f6c99d34397 [7526.416931] Code: 3c 1c e8 1c ff (...) [7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397 [7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003 [7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000 [7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de [7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640 [7526.425950] </TASK> That assertion is relatively new, introduced with commit d04fbe1 ("btrfs: scrub: cleanup the argument list of scrub_chunk()"). The block group we get at scrub_enumerate_chunks() can actually have a start address that is smaller then the chunk offset we extracted from a device extent item we got from the commit root of the device tree. This is very rare, but it can happen due to a race with block group removal and allocation. For example, the following steps show how this can happen: 1) We are at transaction T, and we have the following blocks groups, sorted by their logical start address: [ bg A, start address A, length 1G (data) ] [ bg B, start address B, length 1G (data) ] (...) [ bg W, start address W, length 1G (data) ] --> logical address space hole of 256M, there used to be a 256M metadata block group here [ bg Y, start address Y, length 256M (metadata) ] --> Y matches W's end offset + 256M Block group Y is the block group with the highest logical address in the whole filesystem; 2) Block group Y is deleted and its extent mapping is removed by the call to remove_extent_mapping() made from btrfs_remove_block_group(). So after this point, the last element of the mapping red black tree, its rightmost node, is the mapping for block group W; 3) While still at transaction T, a new data block group is allocated, with a length of 1G. When creating the block group we do a call to find_next_chunk(), which returns the logical start address for the new block group. This calls returns X, which corresponds to the end offset of the last block group, the rightmost node in the mapping red black tree (fs_info->mapping_tree), plus one. So we get a new block group that starts at logical address X and with a length of 1G. It spans over the whole logical range of the old block group Y, that was previously removed in the same transaction. However the device extent allocated to block group X is not the same device extent that was used by block group Y, and it also does not overlap that extent, which must be always the case because we allocate extents by searching through the commit root of the device tree (otherwise it could corrupt a filesystem after a power failure or an unclean shutdown in general), so the extent allocator is behaving as expected; 4) We have a task running scrub, currently at scrub_enumerate_chunks(). There it searches for device extent items in the device tree, using its commit root. It finds a device extent item that was used by block group Y, and it extracts the value Y from that item into the local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset(); It then calls btrfs_lookup_block_group() to find block group for the logical address Y - since there's currently no block group that starts at that logical address, it returns block group X, because its range contains Y. This results in triggering the assertion: ASSERT(cache->start == chunk_offset); right before calling scrub_chunk(), as cache->start is X and chunk_offset is Y. This is more likely to happen of filesystems not larger than 50G, because for these filesystems we use a 256M size for metadata block groups and a 1G size for data block groups, while for filesystems larger than 50G, we use a 1G size for both data and metadata block groups (except for zoned filesystems). It could also happen on any filesystem size due to the fact that system block groups are always smaller (32M) than both data and metadata block groups, but these are not frequently deleted, so much less likely to trigger the race. So make scrub skip any block group with a start offset that is less than the value we expect, as that means it's a new block group that was created in the current transaction. It's pointless to continue and try to scrub its extents, because scrub searches for extents using the commit root, so it won't find any. For a device replace, skip it as well for the same reasons, and we don't need to worry about the possibility of extents of the new block group not being to the new device, because we have the write duplication setup done through btrfs_map_block(). Fixes: d04fbe1 ("btrfs: scrub: cleanup the argument list of scrub_chunk()") CC: [email protected] # 5.17 Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>

While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <[email protected]> Tested-by: David Christensen <[email protected]> Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

As reported by Alan, the CFI (Call Frame Information) in the VDSO time routines is incorrect since commit ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation."). DWARF has a concept called the CFA (Canonical Frame Address), which on powerpc is calculated as an offset from the stack pointer (r1). That means when the stack pointer is changed there must be a corresponding CFI directive to update the calculation of the CFA. The current code is missing those directives for the changes to r1, which prevents gdb from being able to generate a backtrace from inside VDSO functions, eg: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x00007fffffffd960 in ?? () #3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 Backtrace stopped: frame did not save the PC Alan helpfully describes some rules for correctly maintaining the CFI information: 1) Every adjustment to the current frame address reg (ie. r1) must be described, and exactly at the instruction where r1 changes. Why? Because stack unwinding might want to access previous frames. 2) If a function changes LR or any non-volatile register, the save location for those regs must be given. The CFI can be at any instruction after the saves up to the point that the reg is changed. (Exception: LR save should be described before a bl. not after) 3) If asychronous unwind info is needed then restores of LR and non-volatile regs must also be described. The CFI can be at any instruction after the reg is restored up to the point where the save location is (potentially) trashed. Fix the inability to backtrace by adding CFI directives describing the changes to r1, ie. satisfying rule 1. Also change the information for LR to point to the copy saved on the stack, not the value in r0 that will be overwritten by the function call. Finally, add CFI directives describing the save/restore of r2. With the fix gdb can correctly back trace and navigate up and down the stack: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000000100015b60 in gettime () #3 0x000000010000c8bc in print_long_format () #4 0x000000010000d180 in print_current_files () #5 0x00000001000054ac in main () (gdb) up #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #2 0x0000000100015b60 in gettime () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #4 0x000000010000d180 in print_current_files () (gdb) #5 0x00000001000054ac in main () (gdb) Initial frame selected; you cannot go up. (gdb) down #4 0x000000010000d180 in print_current_files () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #2 0x0000000100015b60 in gettime () (gdb) #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #0 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) Fixes: ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.") Cc: [email protected] # v5.11+ Reported-by: Alan Modra <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Segher Boessenkool <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b torvalds#10 [ff1966a94a713f10] kthread at ffffffff9d101b4d torvalds#11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a7811 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Reviewed-by: Michal Schmidt <[email protected]> Tested-by: Dave Cain <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>

This was missed in c3ed222 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.") and causes a panic when mounting with '-o trunkdiscovery': PID: 1604 TASK: ffff93dac3520000 CPU: 3 COMMAND: "mount.nfs" #0 [ffffb79140f738f8] machine_kexec at ffffffffaec64bee #1 [ffffb79140f73950] __crash_kexec at ffffffffaeda67fd #2 [ffffb79140f73a18] crash_kexec at ffffffffaeda76ed #3 [ffffb79140f73a30] oops_end at ffffffffaec2658d #4 [ffffb79140f73a50] general_protection at ffffffffaf60111e [exception RIP: nfs_fattr_init+0x5] RIP: ffffffffc0c18265 RSP: ffffb79140f73b08 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff93dac304a800 RCX: 0000000000000000 RDX: ffffb79140f73bb0 RSI: ffff93dadc8cbb40 RDI: d03ee11cfaf6bd50 RBP: ffffb79140f73be8 R8: ffffffffc0691560 R9: 0000000000000006 R10: ffff93db3ffd3df8 R11: 0000000000000000 R12: ffff93dac4040000 R13: ffff93dac2848e00 R14: ffffb79140f73b60 R15: ffffb79140f73b30 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffb79140f73b08] _nfs41_proc_get_locations at ffffffffc0c73d53 [nfsv4] #6 [ffffb79140f73bf0] nfs4_proc_get_locations at ffffffffc0c83e90 [nfsv4] #7 [ffffb79140f73c60] nfs4_discover_trunking at ffffffffc0c83fb7 [nfsv4] #8 [ffffb79140f73cd8] nfs_probe_fsinfo at ffffffffc0c0f95f [nfs] #9 [ffffb79140f73da0] nfs_probe_server at ffffffffc0c1026a [nfs] RIP: 00007f6254fce26e RSP: 00007ffc69496ac8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6254fce26e RDX: 00005600220a82a0 RSI: 00005600220a64d0 RDI: 00005600220a6520 RBP: 00007ffc69496c50 R8: 00005600220a8710 R9: 003035322e323231 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc69496c50 R13: 00005600220a8440 R14: 0000000000000010 R15: 0000560020650ef9 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b Fixes: c3ed222 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.") Signed-off-by: Scott Mayhew <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

…tion Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Mukesh Ojha <[email protected]> Reported-by: shisiyuan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de9 ("cgroup: prepare migration path for unified hierarchy") Cc: [email protected] # v3.16+

…abled It was brought up that on ARMv7, that because the FUNCTION_TRACER does not use nops to keep function tracing disabled because of the use of a link register, it does have some performance impact. The start of functions when -pg is used to compile the kernel is: push {lr} bl 8010e7c0 <__gnu_mcount_nc> When function tracing is tuned off, it becomes: push {lr} add sp, sp, #4 Which just puts the stack back to its normal location. But these two instructions at the start of every function does incur some overhead. Be more honest in the Kconfig FUNCTION_TRACER description and specify that the overhead being in the noise was x86 specific, but other architectures may vary. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Reported-by: Sascha Hauer <[email protected]> Acked-by: Sascha Hauer <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

On powerpc, 'perf trace' is crashing with a SIGSEGV when trying to process a perf.data file created with 'perf trace record -p': #0 0x00000001225b8988 in syscall_arg__scnprintf_augmented_string <snip> at builtin-trace.c:1492 #1 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1492 #2 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1486 #3 0x00000001225bdd9c in syscall_arg_fmt__scnprintf_val <snip> at builtin-trace.c:1973 #4 syscall__scnprintf_args <snip> at builtin-trace.c:2041 #5 0x00000001225bff04 in trace__sys_enter <snip> at builtin-trace.c:2319 That points to the below code in tools/perf/builtin-trace.c: /* * If this is raw_syscalls.sys_enter, then it always comes with the 6 possible * arguments, even if the syscall being handled, say "openat", uses only 4 arguments * this breaks syscall__augmented_args() check for augmented args, as we calculate * syscall->args_size using each syscalls:sys_enter_NAME tracefs format file, * so when handling, say the openat syscall, we end up getting 6 args for the * raw_syscalls:sys_enter event, when we expected just 4, we end up mistakenly * thinking that the extra 2 u64 args are the augmented filename, so just check * here and avoid using augmented syscalls when the evsel is the raw_syscalls one. */ if (evsel != trace->syscalls.events.sys_enter) augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls_args_size); As the comment points out, we should not be trying to augment the args for raw_syscalls. However, when processing a perf.data file, we are not initializing those properly. Fix the same. Reported-by: Claudio Carvalho <[email protected]> Signed-off-by: Naveen N. Rao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address. Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack. [ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 torvalds#45 [ 21.201979] Hardware name: riscv-virtio,qemu (DT) [ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90 [ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c [ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0 [ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00 [ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8 [ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700 [ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8 [ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal, crash> bt PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh" #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc #6 [ff2000001039be40] vfs_write at ffffffff80152ba6 #7 [ff2000001039be80] ksys_write at ffffffff80152ece #8 [ff2000001039bed0] sys_write at ffffffff80152f46 With the patch, we can get current kernel mode PC, the output as below, [ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 torvalds#42 [ 17.607937] Hardware name: riscv-virtio,qemu (DT) [ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90 [ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68 [ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0 [ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4 [ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700 [ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988 [ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the correct PC, the backtrace showed by crash tool as below, crash> bt PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh" #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2 #7 [ff20000010333e80] ksys_write at ffffffff80152eda #8 [ff20000010333ed0] sys_write at ffffffff80152f52 Fixes: e53d281 ("RISC-V: Add kdump support") Co-developed-by: Guo Ren <[email protected]> Signed-off-by: Xianting Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

Petr Machata says: ==================== mlxsw: Fixes for PTP support This set fixes several issues in mlxsw PTP code. - Patch #1 fixes compilation warnings. - Patch #2 adjusts the order of operation during cleanup, thereby closing the window after PTP state was already cleaned in the ASIC for the given port, but before the port is removed, when the user could still in theory make changes to the configuration. - Patch #3 protects the PTP configuration with a custom mutex, instead of relying on RTNL, which is not held in all access paths. - Patch #4 forbids enablement of PTP only in RX or only in TX. The driver implicitly assumed this would be the case, but neglected to sanitize the configuration. ==================== Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit 866bafa ] There is a potential deadlock if we do report zones in an IO context, detailed in below lockdep report. When one process do a report zones and another process freezes the block device, the report zones side cannot allocate a tag because the freeze is already started. This can thus result in new block group creation to hang forever, blocking the write path. Thankfully, a new block group should be created on empty zones. So, reporting the zones is not necessary and we can set the write pointer = 0 and load the zone capacity from the block layer using bdev_zone_capacity() helper. ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc1 torvalds#252 Not tainted ------------------------------------------------------ modprobe/1110 is trying to acquire lock: ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60 but task is already holding lock: ffff8881205b6f20 (&q->q_usage_counter(queue)torvalds#16){++++}-{0:0}, at: sd_remove+0x85/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&q->q_usage_counter(queue)torvalds#16){++++}-{0:0}: blk_queue_enter+0x3d9/0x500 blk_mq_alloc_request+0x47d/0x8e0 scsi_execute_cmd+0x14f/0xb80 sd_zbc_do_report_zones+0x1c1/0x470 sd_zbc_report_zones+0x362/0xd60 blkdev_report_zones+0x1b1/0x2e0 btrfs_get_dev_zones+0x215/0x7e0 [btrfs] btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs] btrfs_make_block_group+0x36b/0x870 [btrfs] btrfs_create_chunk+0x147d/0x2320 [btrfs] btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs] start_transaction+0xce6/0x1620 [btrfs] btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs] kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&fs_info->dev_replace.rwsem){++++}-{4:4}: down_read+0x9b/0x470 btrfs_map_block+0x2ce/0x2ce0 [btrfs] btrfs_submit_chunk+0x2d4/0x16c0 [btrfs] btrfs_submit_bbio+0x16/0x30 [btrfs] btree_write_cache_pages+0xb5a/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}: __mutex_lock+0x1aa/0x1360 btree_write_cache_pages+0x252/0xf90 [btrfs] do_writepages+0x17f/0x7b0 __writeback_single_inode+0x114/0xb00 writeback_sb_inodes+0x52b/0xe00 wb_writeback+0x1a7/0x800 wb_workfn+0x12a/0xbd0 process_one_work+0x85a/0x1460 worker_thread+0x5e2/0xfc0 kthread+0x39d/0x750 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __lock_acquire+0x2f52/0x5ea0 lock_acquire+0x1b1/0x540 __flush_work+0x3ac/0xb60 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 del_gendisk+0x841/0xa20 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] device_release_driver_internal+0x368/0x520 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)torvalds#16 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)torvalds#16); lock(&fs_info->dev_replace.rwsem); lock(&q->q_usage_counter(queue)torvalds#16); lock((work_completion)(&(&wb->dwork)->work)); *** DEADLOCK *** 5 locks held by modprobe/1110: #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0 #2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520 #3: ffff8881205b6f20 (&q->q_usage_counter(queue)torvalds#16){++++}-{0:0}, at: sd_remove+0x85/0x130 #4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60 stack backtrace: CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 torvalds#252 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_circular_bug.cold+0x1e0/0x274 check_noncircular+0x306/0x3f0 ? __pfx_check_noncircular+0x10/0x10 ? mark_lock+0xf5/0x1650 ? __pfx_check_irq_usage+0x10/0x10 ? lockdep_lock+0xca/0x1c0 ? __pfx_lockdep_lock+0x10/0x10 __lock_acquire+0x2f52/0x5ea0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 lock_acquire+0x1b1/0x540 ? __flush_work+0x38f/0xb60 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? __flush_work+0x38f/0xb60 __flush_work+0x3ac/0xb60 ? __flush_work+0x38f/0xb60 ? __pfx_mark_lock+0x10/0x10 ? __pfx___flush_work+0x10/0x10 ? __pfx_wq_barrier_func+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? mark_held_locks+0x94/0xe0 wb_shutdown+0x15b/0x1f0 bdi_unregister+0x172/0x5b0 ? __pfx_bdi_unregister+0x10/0x10 ? up_write+0x1ba/0x510 del_gendisk+0x841/0xa20 ? __pfx_del_gendisk+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x35/0x60 ? __pm_runtime_resume+0x79/0x110 sd_remove+0x85/0x130 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 __scsi_remove_device+0x272/0x340 scsi_forget_host+0xf7/0x170 scsi_remove_host+0xd2/0x2a0 sdebug_driver_remove+0x52/0x2f0 [scsi_debug] ? kernfs_remove_by_name_ns+0xc0/0xf0 device_release_driver_internal+0x368/0x520 ? kobject_put+0x5d/0x4a0 bus_remove_device+0x1f1/0x3f0 device_del+0x3bd/0x9c0 ? __pfx_device_del+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 device_unregister+0x13/0xa0 sdebug_do_remove_host+0x1fb/0x290 [scsi_debug] scsi_debug_exit+0x17/0x70 [scsi_debug] __do_sys_delete_module.isra.0+0x321/0x520 ? __pfx___do_sys_delete_module.isra.0+0x10/0x10 ? __pfx_slab_free_after_rcu_debug+0x10/0x10 ? kasan_save_stack+0x2c/0x50 ? kasan_record_aux_stack+0xa3/0xb0 ? __call_rcu_common.constprop.0+0xc4/0xfb0 ? kmem_cache_free+0x3a0/0x590 ? __x64_sys_close+0x78/0xd0 do_syscall_64+0x93/0x180 ? lock_is_held_type+0xd5/0x130 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? lockdep_hardirqs_on+0x78/0x100 ? __call_rcu_common.constprop.0+0x3c0/0xfb0 ? __pfx___call_rcu_common.constprop.0+0x10/0x10 ? kmem_cache_free+0x3a0/0x590 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx___x64_sys_openat+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f436712b68b RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Reported-by: Shin'ichiro Kawasaki <[email protected]> CC: <[email protected]> # 6.13+ Tested-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Naohiro Aota <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: <TASK> try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream. Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/all/[email protected]/ Fixes: 84c3fc4 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Gavin Guo <[email protected]> Acked-by: David Hildenbrand <[email protected]> Acked-by: Hugh Dickins <[email protected]> Acked-by: Zi Yan <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Cc: Florent Revest <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Miaohe Lin <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

A warning on driver removal started occurring after commit 9dd05df ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org). Fixes: 2ac515a ("mt76: mt76x02: use napi polling for tx cleanup") Cc: [email protected] Signed-off-by: Fedor Pchelkin <[email protected]> Tested-by: Ming Yen Hsieh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>

This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampolines for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The idea and most of the implementation is taken from the ARM64's implementation of the same feature. The idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. We use -fpatchable-function-entry to reserve 8 bytes above the function entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer to the associated ftrace_ops for that callsite. Functions are aligned to 8 bytes to make sure that the accesses to this literal are atomic. This approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. We've benchamrked this with the ftrace_ops sample module on Spacemit K1 Jupiter: Without this patch: baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1357958 | 13 | - | | 0 | 1 | 1302375 | 13 | - | | 0 | 2 | 1302375 | 13 | - | | 0 | 10 | 1379084 | 13 | - | | 0 | 100 | 1302458 | 13 | - | | 0 | 200 | 1302333 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13677833 | 136 | 123 | | 1 | 1 | 18500916 | 185 | 172 | | 1 | 2 | 2285645 | 228 | 215 | | 1 | 10 | 58824709 | 588 | 575 | | 1 | 100 | 505141584 | 5051 | 5038 | | 1 | 200 | 1580473126 | 15804 | 15791 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13561000 | 135 | 122 | | 2 | 0 | 19707292 | 197 | 184 | | 10 | 0 | 67774750 | 677 | 664 | | 100 | 0 | 714123125 | 7141 | 7128 | | 200 | 0 | 1918065668 | 19180 | 19167 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. With this patch: v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1459917 | 14 | - | | 0 | 1 | 1408000 | 14 | - | | 0 | 2 | 1383792 | 13 | - | | 0 | 10 | 1430709 | 14 | - | | 0 | 100 | 1383791 | 13 | - | | 0 | 200 | 1383750 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5238041 | 52 | 38 | | 1 | 1 | 5228542 | 52 | 38 | | 1 | 2 | 5325917 | 53 | 40 | | 1 | 10 | 5299667 | 52 | 38 | | 1 | 100 | 5245250 | 52 | 39 | | 1 | 200 | 5238459 | 52 | 39 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5239083 | 52 | 38 | | 2 | 0 | 19449417 | 194 | 181 | | 10 | 0 | 67718584 | 677 | 663 | | 100 | 0 | 709840708 | 7098 | 7085 | | 200 | 0 | 2203580626 | 22035 | 22022 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/3 of the overhead prior to this series (from 122ns to 38ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. Signed-off-by: Puranjay Mohan <[email protected]> [update kconfig, asm, refactor] Signed-off-by: Andy Chiu <[email protected]> Tested-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Ghiti <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>

[ Upstream commit ee684de ] As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Reported-by: lmarch2 <[email protected]> Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Shung-Hsi Yu <[email protected]> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit c98cc97 upstream. Running a modified trace-cmd record --nosplice where it does a mmap of the ring buffer when '--nosplice' is set, caused the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.15.0-rc7-test-00002-gfb7d03d8a82f torvalds#551 Not tainted ------------------------------------------------------ trace-cmd/1113 is trying to acquire lock: ffff888100062888 (&buffer->mutex){+.+.}-{4:4}, at: ring_buffer_map+0x11c/0xe70 but task is already holding lock: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&cpu_buffer->mapping_lock){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 ring_buffer_map+0xcf/0xe70 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 do_mmap+0x9d7/0x1010 vm_mmap_pgoff+0x20b/0x390 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #4 (&mm->mmap_lock){++++}-{4:4}: __might_fault+0xa5/0x110 _copy_to_user+0x22/0x80 _perf_ioctl+0x61b/0x1b70 perf_ioctl+0x62/0x90 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #3 (&cpuctx_mutex){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 perf_event_init_cpu+0x325/0x7c0 perf_event_init+0x52a/0x5b0 start_kernel+0x263/0x3e0 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0x95/0xa0 common_startup_64+0x13e/0x141 -> #2 (pmus_lock){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 perf_event_init_cpu+0xb7/0x7c0 cpuhp_invoke_callback+0x2c0/0x1030 __cpuhp_invoke_callback_range+0xbf/0x1f0 _cpu_up+0x2e7/0x690 cpu_up+0x117/0x170 cpuhp_bringup_mask+0xd5/0x120 bringup_nonboot_cpus+0x13d/0x170 smp_init+0x2b/0xf0 kernel_init_freeable+0x441/0x6d0 kernel_init+0x1e/0x160 ret_from_fork+0x34/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2a/0xd0 ring_buffer_resize+0x610/0x14e0 __tracing_resize_ring_buffer.part.0+0x42/0x120 tracing_set_tracer+0x7bd/0xa80 tracing_set_trace_write+0x132/0x1e0 vfs_write+0x21c/0xe80 ksys_write+0xf9/0x1c0 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&buffer->mutex){+.+.}-{4:4}: __lock_acquire+0x1405/0x2210 lock_acquire+0x174/0x310 __mutex_lock+0x192/0x18c0 ring_buffer_map+0x11c/0xe70 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 do_mmap+0x9d7/0x1010 vm_mmap_pgoff+0x20b/0x390 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &buffer->mutex --> &mm->mmap_lock --> &cpu_buffer->mapping_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cpu_buffer->mapping_lock); lock(&mm->mmap_lock); lock(&cpu_buffer->mapping_lock); lock(&buffer->mutex); *** DEADLOCK *** 2 locks held by trace-cmd/1113: #0: ffff888106b847e0 (&mm->mmap_lock){++++}-{4:4}, at: vm_mmap_pgoff+0x192/0x390 #1: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70 stack backtrace: CPU: 5 UID: 0 PID: 1113 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00002-gfb7d03d8a82f torvalds#551 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_circular_bug.cold+0x178/0x1be check_noncircular+0x146/0x160 __lock_acquire+0x1405/0x2210 lock_acquire+0x174/0x310 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? __mutex_lock+0x169/0x18c0 __mutex_lock+0x192/0x18c0 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? function_trace_call+0x296/0x370 ? __pfx___mutex_lock+0x10/0x10 ? __pfx_function_trace_call+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 ? _raw_spin_unlock+0x2d/0x50 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? __mutex_lock+0x5/0x18c0 ring_buffer_map+0x11c/0xe70 ? do_raw_spin_lock+0x12d/0x270 ? find_held_lock+0x2b/0x80 ? _raw_spin_unlock+0x2d/0x50 ? rcu_is_watching+0x15/0xb0 ? _raw_spin_unlock+0x2d/0x50 ? trace_preempt_on+0xd0/0x110 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 ? ring_buffer_lock_reserve+0x99/0xff0 ? __pfx___mmap_region+0x10/0x10 ? ring_buffer_lock_reserve+0x99/0xff0 ? __pfx_ring_buffer_lock_reserve+0x10/0x10 ? __pfx_ring_buffer_lock_reserve+0x10/0x10 ? bpf_lsm_mmap_addr+0x4/0x10 ? security_mmap_addr+0x46/0xd0 ? lock_is_held_type+0xd9/0x130 do_mmap+0x9d7/0x1010 ? 0xffffffffc0370095 ? __pfx_do_mmap+0x10/0x10 vm_mmap_pgoff+0x20b/0x390 ? __pfx_vm_mmap_pgoff+0x10/0x10 ? 0xffffffffc0370095 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb0963a7de2 Code: 00 00 00 0f 1f 44 00 00 41 f7 c1 ff 0f 00 00 75 27 55 89 cd 53 48 89 fb 48 85 ff 74 3b 41 89 ea 48 89 df b8 09 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 5b 5d c3 0f 1f 00 48 8b 05 e1 9f 0d 00 64 RSP: 002b:00007ffdcc8fb878 EFLAGS: 00000246 ORIG_RAX: 0000000000000009 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb0963a7de2 RDX: 0000000000000001 RSI: 0000000000001000 RDI: 0000000000000000 RBP: 0000000000000001 R08: 0000000000000006 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffdcc8fbe68 R14: 00007fb096628000 R15: 00005633e01a5c90 </TASK> The issue is that cpus_read_lock() is taken within buffer->mutex. The memory mapped pages are taken with the mmap_lock held. The buffer->mutex is taken within the cpu_buffer->mapping_lock. There's quite a chain with all these locks, where the deadlock can be fixed by moving the cpus_read_lock() outside the taking of the buffer->mutex. Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Vincent Donnefort <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: 117c392 ("ring-buffer: Introducing ring-buffer mapping functions") Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit eedf3e3 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 torvalds#10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f torvalds#11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf torvalds#12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 torvalds#13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 torvalds#14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d torvalds#15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e torvalds#16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad torvalds#17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e torvalds#18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 torvalds#19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 torvalds#20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 torvalds#21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 torvalds#22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 torvalds#23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 torvalds#24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 torvalds#25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc torvalds#26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 torvalds#27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 torvalds#28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 torvalds#29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d torvalds#30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 torvalds#31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 torvalds#32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 torvalds#33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d torvalds#34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 torvalds#35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e torvalds#36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 torvalds#37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 torvalds#38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 torvalds#39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 torvalds#40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 torvalds#41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Tamir Duberstein <[email protected]> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1e9ac33 ] Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f3 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <[email protected]> Co-developed-by: Michael Chan <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f3 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <[email protected]> Co-developed-by: Michael Chan <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

… context The current use of a mutex to protect the notifier hashtable accesses can lead to issues in the atomic context. It results in the below kernel warnings: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4 | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | handle_notif_callbacks+0x54/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 To address this, replace the mutex with an rwlock to protect the notifier hashtable accesses. This ensures that read-side locking does not sleep and multiple readers can acquire the lock concurrently, avoiding unnecessary contention and potential deadlocks. Writer access remains exclusive, preserving correctness. This change resolves warnings from lockdep about potential sleep in atomic context. Cc: Jens Wiklander <[email protected]> Reported-by: Jérôme Forissier <[email protected]> Closes: OP-TEE/optee_os#7394 Fixes: e057344 ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <[email protected]> Reviewed-by: Jens Wiklander <[email protected]> Tested-by: Jens Wiklander <[email protected]> Signed-off-by: Sudeep Holla <[email protected]>

… context [ Upstream commit 9ca7a42 ] The current use of a mutex to protect the notifier hashtable accesses can lead to issues in the atomic context. It results in the below kernel warnings: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4 | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | handle_notif_callbacks+0x54/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 To address this, replace the mutex with an rwlock to protect the notifier hashtable accesses. This ensures that read-side locking does not sleep and multiple readers can acquire the lock concurrently, avoiding unnecessary contention and potential deadlocks. Writer access remains exclusive, preserving correctness. This change resolves warnings from lockdep about potential sleep in atomic context. Cc: Jens Wiklander <[email protected]> Reported-by: Jérôme Forissier <[email protected]> Closes: OP-TEE/optee_os#7394 Fixes: e057344 ("firmware: arm_ffa: Add interfaces to request notification callbacks") Message-Id: <[email protected]> Reviewed-by: Jens Wiklander <[email protected]> Tested-by: Jens Wiklander <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.16, take #4 - Gracefully fail initialising pKVM if the interrupt controller isn't GICv3 - Also gracefully fail initialising pKVM if the carveout allocation fails - Fix the computing of the minimum MMIO range required for the host on stage-2 fault - Fix the generation of the GICv3 Maintenance Interrupt in nested mode

pert script tests fails with segmentation fault as below: 92: perf script tests: --- start --- test child forked, pid 103769 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ] /usr/libexec/perf-core/tests/shell/script.sh: line 35: 103780 Segmentation fault (core dumped) perf script -i "${perfdatafile}" -s "${db_test}" --- Cleaning up --- ---- end(-1) ---- 92: perf script tests : FAILED! Backtrace pointed to : #0 0x0000000010247dd0 in maps.machine () #1 0x00000000101d178c in db_export.sample () #2 0x00000000103412c8 in python_process_event () #3 0x000000001004eb28 in process_sample_event () #4 0x000000001024fcd0 in machines.deliver_event () #5 0x000000001025005c in perf_session.deliver_event () #6 0x00000000102568b0 in __ordered_events__flush.part.0 () #7 0x0000000010251618 in perf_session.process_events () #8 0x0000000010053620 in cmd_script () #9 0x00000000100b5a28 in run_builtin () torvalds#10 0x00000000100b5f94 in handle_internal_command () torvalds#11 0x0000000010011114 in main () Further investigation reveals that this occurs in the `perf script tests`, because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`. With `perf_db_export_mode` enabled, if a sample originates from a hypervisor, perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL when `maps__machine(al->maps)` is called from `db_export__sample`. As al->maps can be NULL in case of Hypervisor samples , use thread->maps because even for Hypervisor sample, machine should exist. If we don't have machine for some reason, return -1 to avoid segmentation fault. Reported-by: Disha Goel <[email protected]> Signed-off-by: Aditya Bodkhe <[email protected]> Reviewed-by: Adrian Hunter <[email protected]> Tested-by: Disha Goel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Suggested-by: Adrian Hunter <[email protected]> Signed-off-by: Namhyung Kim <[email protected]>

Without the change `perf `hangs up on charaster devices. On my system it's enough to run system-wide sampler for a few seconds to get the hangup: $ perf record -a -g --call-graph=dwarf $ perf report # hung `strace` shows that hangup happens on reading on a character device `/dev/dri/renderD128` $ strace -y -f -p 2780484 strace: Process 2780484 attached pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached It's call trace descends into `elfutils`: $ gdb -p 2780484 (gdb) bt #0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0) at ../sysdeps/unix/sysv/linux/pread64.c:25 #1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1 #2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0) at util/dso.h:537 #6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114 #7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242 #8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 torvalds#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 torvalds#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 torvalds#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0, thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127, best_effort=best_effort@entry=false) at util/thread.h:152 torvalds#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939 torvalds#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2920 torvalds#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440, sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true) at util/machine.c:2970 torvalds#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440, sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198 torvalds#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0, evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127 torvalds#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127, arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255 torvalds#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540, evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334 torvalds#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0, file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367 torvalds#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245 torvalds#22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324 torvalds#23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224, file_path=0x105ffbf0 "perf.data") at util/session.c:1419 torvalds#24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0, --Type <RET> for more, q to quit, c to continue without paging-- quit prog=prog@entry=0x7fff9df81220) at util/session.c:2132 torvalds#25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220) at util/session.c:2181 torvalds#26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226 torvalds#27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390 torvalds#28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076 torvalds#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827 torvalds#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:351 torvalds#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404 torvalds#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448 torvalds#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556 The hangup happens because nothing in` perf` or `elfutils` checks if a mapped file is easily readable. The change conservatively skips all non-regular files. Signed-off-by: Sergei Trofimovich <[email protected]> Acked-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

Symbolize stack traces by creating a live machine. Add this functionality to dump_stack and switch dump_stack users to use it. Switch TUI to use it. Add stack traces to the child test function which can be useful to diagnose blocked code. Example output: ``` $ perf test -vv PERF_RECORD_ ... 7: PERF_RECORD_* events & perf_sample fields: 7: PERF_RECORD_* events & perf_sample fields : Running (1 active) ^C Signal (2) while running tests. Terminating tests with the same signal Internal test harness failure. Completing any started tests: : 7: PERF_RECORD_* events & perf_sample fields: ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #4 0x7fc12fef1393 in __nanosleep nanosleep.c:26 #5 0x7fc12ff02d68 in __sleep sleep.c:55 #6 0x55788c63196b in test__PERF_RECORD perf-record.c:0 #7 0x55788c620fb0 in run_test_child builtin-test.c:0 #8 0x55788c5bd18d in start_command run-command.c:127 #9 0x55788c621ef3 in __cmd_test builtin-test.c:0 torvalds#10 0x55788c6225bf in cmd_test ??:0 torvalds#11 0x55788c5afbd0 in run_builtin perf.c:0 torvalds#12 0x55788c5afeeb in handle_internal_command perf.c:0 torvalds#13 0x55788c52b383 in main ??:0 torvalds#14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#16 0x55788c52b9d1 in _start ??:0 ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45 #3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26 #4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36 #5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0 #6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #9 0x7fc12fef1393 in __nanosleep nanosleep.c:26 torvalds#10 0x7fc12ff02d68 in __sleep sleep.c:55 torvalds#11 0x55788c63196b in test__PERF_RECORD perf-record.c:0 torvalds#12 0x55788c620fb0 in run_test_child builtin-test.c:0 torvalds#13 0x55788c5bd18d in start_command run-command.c:127 torvalds#14 0x55788c621ef3 in __cmd_test builtin-test.c:0 torvalds#15 0x55788c6225bf in cmd_test ??:0 torvalds#16 0x55788c5afbd0 in run_builtin perf.c:0 torvalds#17 0x55788c5afeeb in handle_internal_command perf.c:0 torvalds#18 0x55788c52b383 in main ??:0 torvalds#19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#21 0x55788c52b9d1 in _start ??:0 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Signed-off-by: Ian Rogers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

Calling perf top with branch filters enabled on Intel CPU's with branch counters logging (A.K.A LBR event logging [1]) support results in a segfault. $ perf top -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter ... Thread 27 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffafff76c0 (LWP 949003)] perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 653 *width = env->cpu_pmu_caps ? env->br_cntr_width : (gdb) bt #0 perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 #1 0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345 #2 0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389 #3 0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422 #4 0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850 #5 0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737 #6 0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359 #7 0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845 #8 0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211 #9 0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245 torvalds#10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324 torvalds#11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342 torvalds#12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120 torvalds#13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448 torvalds#14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78 The cause is that perf_env__find_br_cntr_info tries to access a null pointer pmu_caps in the perf_env struct. A similar issue exists for homogeneous core systems which use the cpu_pmu_caps structure. Fix this by populating cpu_pmu_caps and pmu_caps structures with values from sysfs when calling perf top with branch stack sampling enabled. [1], LBR event logging introduced here: https://lore.kernel.org/all/[email protected]/ Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: Thomas Falcon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

commit f7fa852 upstream. Add the SM6115 MDSS compatible to clients compatible list, as it also needs that workaround. Without this workaround, for example, QRB4210 RB2 which is based on SM4250/SM6115 generates a lot of smmu unhandled context faults during boot: arm_smmu_context_fault: 116854 callbacks suppressed arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1] arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 and also failed initialisation of lontium lt9611uxc, gpu and dpu is observed: (binding MDSS components triggered by lt9611uxc have failed) ------------[ cut here ]------------ !aspace WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm] Modules linked in: ... (long list of modules) CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_vma_init+0x150/0x18c [msm] lr : msm_gem_vma_init+0x150/0x18c [msm] sp : ffff80008144b280 ... Call trace: msm_gem_vma_init+0x150/0x18c [msm] (P) get_vma_locked+0xc0/0x194 [msm] msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm] msm_gem_kernel_new+0x48/0x160 [msm] msm_gpu_init+0x34c/0x53c [msm] adreno_gpu_init+0x1b0/0x2d8 [msm] a6xx_gpu_init+0x1e8/0x9e0 [msm] adreno_bind+0x2b8/0x348 [msm] component_bind_all+0x100/0x230 msm_drm_bind+0x13c/0x3d0 [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x174 component_add+0x14/0x20 dsi_dev_attach+0x20/0x34 [msm] dsi_host_attach+0x58/0x98 [msm] devm_mipi_dsi_attach+0x34/0x90 lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc] lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc] i2c_device_probe+0x148/0x2a8 really_probe+0xbc/0x2c0 __driver_probe_device+0x78/0x120 driver_probe_device+0x3c/0x154 __driver_attach+0x90/0x1a0 bus_for_each_dev+0x68/0xb8 driver_attach+0x24/0x30 bus_add_driver+0xe4/0x208 driver_register+0x68/0x124 i2c_register_driver+0x48/0xcc lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc] do_one_initcall+0x60/0x1d4 do_init_module+0x54/0x1fc load_module+0x1748/0x1c8c init_module_from_file+0x74/0xa0 __arm64_sys_finit_module+0x130/0x2f8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x2c/0x80 el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22 msm_dpu 5e01000.display-controller: failed to load adreno gpu platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22 msm_dpu 5e01000.display-controller: adev bind failed: -22 lt9611uxc 0-002b: failed to attach dsi to host lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22 Suggested-by: Bjorn Andersson <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Fixes: 3581b70 ("drm/msm/disp/dpu1: add support for display on SM6115") Cc: [email protected] Signed-off-by: Alexey Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] <TASK > [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] </TASK > [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590 The direct cause of this issue is that after smc_listen_out_connected(), newclcsock->sk may be NULL since it will releases the smcsk. Therefore, if the application closes the socket immediately after accept, newclcsock->sk can be NULL. A possible execution order could be as follows: smc_listen_work | userspace ----------------------------------------------------------------- lock_sock(sk) | smc_listen_out_connected() | | \- smc_listen_out | | | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL; /* newclcsock->sk is NULL now */ SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk)) Since smc_listen_out_connected() will not fail, simply swapping the order of the code can easily fix this issue. Fixes: 3b2dec2 ("net/smc: restructure client and server code in af_smc") Signed-off-by: D. Wythe <[email protected]> Reviewed-by: Guangguan Wang <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Reviewed-by: Dust Li <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

[ Upstream commit d9cef55 ] BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] <TASK > [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] </TASK > [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590 The direct cause of this issue is that after smc_listen_out_connected(), newclcsock->sk may be NULL since it will releases the smcsk. Therefore, if the application closes the socket immediately after accept, newclcsock->sk can be NULL. A possible execution order could be as follows: smc_listen_work | userspace ----------------------------------------------------------------- lock_sock(sk) | smc_listen_out_connected() | | \- smc_listen_out | | | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL; /* newclcsock->sk is NULL now */ SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk)) Since smc_listen_out_connected() will not fail, simply swapping the order of the code can easily fix this issue. Fixes: 3b2dec2 ("net/smc: restructure client and server code in af_smc") Signed-off-by: D. Wythe <[email protected]> Reviewed-by: Guangguan Wang <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Reviewed-by: Dust Li <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <[email protected]> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <[email protected]>

The test starts a workload and then opens events. If the events fail to open, for example because of perf_event_paranoid, the gopipe of the workload is leaked and the file descriptor leak check fails when the test exits. To avoid this cancel the workload when opening the events fails. Before: ``` $ perf test -vv 7 7: PERF_RECORD_* events & perf_sample fields: --- start --- test child forked, pid 1189568 Using CPUID GenuineIntel-6-B7-1 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 Attempt to add: software/cpu-clock/ ..after resolving event: software/config=0/ cpu-clock -> software/cpu-clock/ ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0x9 (PERF_COUNT_SW_DUMMY) sample_type IP|TID|TIME|CPU read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 perf_evlist__open: Permission denied ---- end(-2) ---- Leak of file descriptor 6 that opened: 'pipe:[14200347]' ---- unexpected signal (6) ---- iFailed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311 #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0 #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44 #3 0x7f29ce849cc2 in raise raise.c:27 #4 0x7f29ce8324ac in abort abort.c:81 #5 0x565358f662d4 in check_leaks builtin-test.c:226 #6 0x565358f6682e in run_test_child builtin-test.c:344 #7 0x565358ef7121 in start_command run-command.c:128 #8 0x565358f67273 in start_test builtin-test.c:545 #9 0x565358f6771d in __cmd_test builtin-test.c:647 torvalds#10 0x565358f682bd in cmd_test builtin-test.c:849 torvalds#11 0x565358ee5ded in run_builtin perf.c:349 torvalds#12 0x565358ee6085 in handle_internal_command perf.c:401 torvalds#13 0x565358ee61de in run_argv perf.c:448 torvalds#14 0x565358ee6527 in main perf.c:555 torvalds#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#17 0x565358e391c1 in _start perf[851c1] 7: PERF_RECORD_* events & perf_sample fields : FAILED! ``` After: ``` $ perf test 7 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object") Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chun-Tse Shao <[email protected]> Cc: Howard Chu <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Before disabling SR-IOV via config space accesses to the parent PF, sriov_disable() first removes the PCI devices representing the VFs. Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()") such removal operations are serialized against concurrent remove and rescan using the pci_rescan_remove_lock. No such locking was ever added in sriov_disable() however. In particular when commit 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device removal into sriov_del_vfs() there was still no locking around the pci_iov_remove_virtfn() calls. On s390 the lack of serialization in sriov_disable() may cause double remove and list corruption with the below (amended) trace being observed: PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56) GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001 00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480 0000000000000001 0000000000000000 0000000000000000 0000000180692828 00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8 #0 [3800313fb20] device_del at c9158ad5c #1 [3800313fb88] pci_remove_bus_device at c915105ba #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198 #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0 #4 [3800313fc60] zpci_bus_remove_device at c90fb6104 #5 [3800313fca0] __zpci_event_availability at c90fb3dca #6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2 #7 [3800313fd60] crw_collect_info at c91905822 #8 [3800313fe10] kthread at c90feb390 #9 [3800313fe68] __ret_from_fork at c90f6aa64 torvalds#10 [3800313fe98] ret_from_fork at c9194f3f2. This is because in addition to sriov_disable() removing the VFs, the platform also generates hot-unplug events for the VFs. This being the reverse operation to the hotplug events generated by sriov_enable() and handled via pdev->no_vf_scan. And while the event processing takes pci_rescan_remove_lock and checks whether the struct pci_dev still exists, the lack of synchronization makes this checking racy. Other races may also be possible of course though given that this lack of locking persisted so long observable races seem very rare. Even on s390 the list corruption was only observed with certain devices since the platform events are only triggered by config accesses after the removal, so as long as the removal finished synchronously they would not race. Either way the locking is missing so fix this by adding it to the sriov_del_vfs() helper. Just like PCI rescan-remove, locking is also missing in sriov_add_vfs() including for the error case where pci_stop_and_remove_bus_device() is called without the PCI rescan-remove lock being held. Even in the non-error case, adding new PCI devices and buses should be serialized via the PCI rescan-remove lock. Add the necessary locking. Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Reviewed-by: Farhan Ali <[email protected]> Reviewed-by: Julian Ruess <[email protected]> Cc: [email protected] Link: https://patch.msgid.link/[email protected]

Since blamed commit, unregister_netdevice_many_notify() takes the netdev mutex if the device needs it. If the device list is too long, this will lock more device mutexes than lockdep can handle: unshare -n \ bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done' BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by kworker/u16:1/69: #0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work #1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work #2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net #3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch #4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify [..] Add a helper to close and then unlock a list of net_devices. Devices that are not up have to be skipped - netif_close_many always removes them from the list without any other actions taken, so they'd remain in locked state. Close devices whenever we've used up half of the tracking slots or we processed entire list without hitting the limit. Fixes: 7e4d784 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

[ Upstream commit 48918ca ] The test starts a workload and then opens events. If the events fail to open, for example because of perf_event_paranoid, the gopipe of the workload is leaked and the file descriptor leak check fails when the test exits. To avoid this cancel the workload when opening the events fails. Before: ``` $ perf test -vv 7 7: PERF_RECORD_* events & perf_sample fields: --- start --- test child forked, pid 1189568 Using CPUID GenuineIntel-6-B7-1 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/) disabled 1 exclude_kernel 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3 Attempt to add: software/cpu-clock/ ..after resolving event: software/config=0/ cpu-clock -> software/cpu-clock/ ------------------------------------------------------------ perf_event_attr: type 1 (PERF_TYPE_SOFTWARE) size 136 config 0x9 (PERF_COUNT_SW_DUMMY) sample_type IP|TID|TIME|CPU read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 enable_on_exec 1 task 1 sample_id_all 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 perf_evlist__open: Permission denied ---- end(-2) ---- Leak of file descriptor 6 that opened: 'pipe:[14200347]' ---- unexpected signal (6) ---- iFailed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon Failed to read build ID for //anon #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311 #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0 #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44 #3 0x7f29ce849cc2 in raise raise.c:27 #4 0x7f29ce8324ac in abort abort.c:81 #5 0x565358f662d4 in check_leaks builtin-test.c:226 #6 0x565358f6682e in run_test_child builtin-test.c:344 #7 0x565358ef7121 in start_command run-command.c:128 #8 0x565358f67273 in start_test builtin-test.c:545 #9 0x565358f6771d in __cmd_test builtin-test.c:647 torvalds#10 0x565358f682bd in cmd_test builtin-test.c:849 torvalds#11 0x565358ee5ded in run_builtin perf.c:349 torvalds#12 0x565358ee6085 in handle_internal_command perf.c:401 torvalds#13 0x565358ee61de in run_argv perf.c:448 torvalds#14 0x565358ee6527 in main perf.c:555 torvalds#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#17 0x565358e391c1 in _start perf[851c1] 7: PERF_RECORD_* events & perf_sample fields : FAILED! ``` After: ``` $ perf test 7 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object") Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chun-Tse Shao <[email protected]> Cc: Howard Chu <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0570327 upstream. Before disabling SR-IOV via config space accesses to the parent PF, sriov_disable() first removes the PCI devices representing the VFs. Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()") such removal operations are serialized against concurrent remove and rescan using the pci_rescan_remove_lock. No such locking was ever added in sriov_disable() however. In particular when commit 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device removal into sriov_del_vfs() there was still no locking around the pci_iov_remove_virtfn() calls. On s390 the lack of serialization in sriov_disable() may cause double remove and list corruption with the below (amended) trace being observed: PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56) GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001 00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480 0000000000000001 0000000000000000 0000000000000000 0000000180692828 00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8 #0 [3800313fb20] device_del at c9158ad5c #1 [3800313fb88] pci_remove_bus_device at c915105ba #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198 #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0 #4 [3800313fc60] zpci_bus_remove_device at c90fb6104 #5 [3800313fca0] __zpci_event_availability at c90fb3dca #6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2 #7 [3800313fd60] crw_collect_info at c91905822 #8 [3800313fe10] kthread at c90feb390 #9 [3800313fe68] __ret_from_fork at c90f6aa64 torvalds#10 [3800313fe98] ret_from_fork at c9194f3f2. This is because in addition to sriov_disable() removing the VFs, the platform also generates hot-unplug events for the VFs. This being the reverse operation to the hotplug events generated by sriov_enable() and handled via pdev->no_vf_scan. And while the event processing takes pci_rescan_remove_lock and checks whether the struct pci_dev still exists, the lack of synchronization makes this checking racy. Other races may also be possible of course though given that this lack of locking persisted so long observable races seem very rare. Even on s390 the list corruption was only observed with certain devices since the platform events are only triggered by config accesses after the removal, so as long as the removal finished synchronously they would not race. Either way the locking is missing so fix this by adding it to the sriov_del_vfs() helper. Just like PCI rescan-remove, locking is also missing in sriov_add_vfs() including for the error case where pci_stop_and_remove_bus_device() is called without the PCI rescan-remove lock being held. Even in the non-error case, adding new PCI devices and buses should be serialized via the PCI rescan-remove lock. Add the necessary locking. Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()") Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Reviewed-by: Farhan Ali <[email protected]> Reviewed-by: Julian Ruess <[email protected]> Cc: [email protected] Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ked_roots() If fs_info->super_copy or fs_info->super_for_commit allocated failed in btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info(). Otherwise btrfs_check_leaked_roots() would access NULL pointer because fs_info->allocated_roots had not been initialised. syzkaller reported the following information: ------------[ cut here ]------------ BUG: unable to handle page fault for address: fffffffffffffbb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...) RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline] RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline] RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline] RIP: 0010:refcount_read include/linux/refcount.h:170 [inline] RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230 [...] Call Trace: <TASK> btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280 btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029 btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097 vfs_get_tree+0x98/0x320 fs/super.c:1759 do_new_mount+0x357/0x660 fs/namespace.c:3899 path_mount+0x716/0x19c0 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount fs/namespace.c:4427 [inline] __x64_sys_mount+0x28c/0x310 fs/namespace.c:4427 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f032eaffa8d [...] Fixes: 3bb17a2 ("btrfs: add get_tree callback for new mount API") CC: [email protected] # 6.12+ Reviewed-by: Daniel Vacek <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Dewei Meng <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

[ Upstream commit 7f0fddd ] Since blamed commit, unregister_netdevice_many_notify() takes the netdev mutex if the device needs it. If the device list is too long, this will lock more device mutexes than lockdep can handle: unshare -n \ bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done' BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by kworker/u16:1/69: #0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work #1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work #2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net #3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch #4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify [..] Add a helper to close and then unlock a list of net_devices. Devices that are not up have to be skipped - netif_close_many always removes them from the list without any other actions taken, so they'd remain in locked state. Close devices whenever we've used up half of the tracking slots or we processed entire list without hitting the limit. Fixes: 7e4d784 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

The original code causes a circular locking dependency found by lockdep. ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U ------------------------------------------------------ xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660 but task is already holding lock: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devcd->mutex){+.+.}-{3:3}: mutex_lock_nested+0x4e/0xc0 devcd_data_write+0x27/0x90 sysfs_kf_bin_write+0x80/0xf0 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (kn->active#236){++++}-{0:0}: kernfs_drain+0x1e2/0x200 __kernfs_remove+0xae/0x400 kernfs_remove_by_name_ns+0x5d/0xc0 remove_files+0x54/0x70 sysfs_remove_group+0x3d/0xa0 sysfs_remove_groups+0x2e/0x60 device_remove_attrs+0xc7/0x100 device_del+0x15d/0x3b0 devcd_del+0x19/0x30 process_one_work+0x22b/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11c/0x250 ret_from_fork+0x26c/0x2e0 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}: __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 __flush_work+0x27a/0x660 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devcd->mutex); lock(kn->active#236); lock(&devcd->mutex); lock((work_completion)(&(&devcd->del_wk)->work)); *** DEADLOCK *** 5 locks held by xe_fault_inject/5091: #0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 #1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220 #2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280 #3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 #4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660 stack backtrace: CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)} Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021 Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 dump_stack+0x10/0x20 print_circular_bug+0x285/0x360 check_noncircular+0x135/0x150 ? register_lock_class+0x48/0x4a0 __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 ? __flush_work+0x25d/0x660 ? mark_held_locks+0x46/0x90 ? __flush_work+0x25d/0x660 __flush_work+0x27a/0x660 ? __flush_work+0x25d/0x660 ? trace_hardirqs_on+0x1e/0xd0 ? __pfx_wq_barrier_func+0x10/0x10 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 ? bus_find_device+0xa8/0xe0 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 ? __f_unlock_pos+0x15/0x20 ? __x64_sys_getdents64+0x9b/0x130 ? __pfx_filldir64+0x10/0x10 ? do_syscall_64+0x1a2/0xb60 ? clear_bhb_loop+0x30/0x80 ? clear_bhb_loop+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x76e292edd574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574 RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063 R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000 </TASK> xe 0000:03:00.0: [drm] Xe device coredump has been deleted. Fixes: 01daccf ("devcoredump : Serialize devcd_del work") Cc: Mukesh Ojha <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Cc: [email protected] # v6.1+ Signed-off-by: Maarten Lankhorst <[email protected]> Cc: Matthew Brost <[email protected]> Acked-by: Mukesh Ojha <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ked_roots() commit 17679ac upstream. If fs_info->super_copy or fs_info->super_for_commit allocated failed in btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info(). Otherwise btrfs_check_leaked_roots() would access NULL pointer because fs_info->allocated_roots had not been initialised. syzkaller reported the following information: ------------[ cut here ]------------ BUG: unable to handle page fault for address: fffffffffffffbb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...) RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline] RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline] RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline] RIP: 0010:refcount_read include/linux/refcount.h:170 [inline] RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230 [...] Call Trace: <TASK> btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280 btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029 btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097 vfs_get_tree+0x98/0x320 fs/super.c:1759 do_new_mount+0x357/0x660 fs/namespace.c:3899 path_mount+0x716/0x19c0 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount fs/namespace.c:4427 [inline] __x64_sys_mount+0x28c/0x310 fs/namespace.c:4427 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f032eaffa8d [...] Fixes: 3bb17a2 ("btrfs: add get_tree callback for new mount API") CC: [email protected] # 6.12+ Reviewed-by: Daniel Vacek <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Dewei Meng <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a91c809 upstream. The original code causes a circular locking dependency found by lockdep. ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U ------------------------------------------------------ xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660 but task is already holding lock: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devcd->mutex){+.+.}-{3:3}: mutex_lock_nested+0x4e/0xc0 devcd_data_write+0x27/0x90 sysfs_kf_bin_write+0x80/0xf0 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (kn->active#236){++++}-{0:0}: kernfs_drain+0x1e2/0x200 __kernfs_remove+0xae/0x400 kernfs_remove_by_name_ns+0x5d/0xc0 remove_files+0x54/0x70 sysfs_remove_group+0x3d/0xa0 sysfs_remove_groups+0x2e/0x60 device_remove_attrs+0xc7/0x100 device_del+0x15d/0x3b0 devcd_del+0x19/0x30 process_one_work+0x22b/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11c/0x250 ret_from_fork+0x26c/0x2e0 ret_from_fork_asm+0x1a/0x30 -> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}: __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 __flush_work+0x27a/0x660 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devcd->mutex); lock(kn->active#236); lock(&devcd->mutex); lock((work_completion)(&(&devcd->del_wk)->work)); *** DEADLOCK *** 5 locks held by xe_fault_inject/5091: #0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 #1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220 #2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280 #3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0 #4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660 stack backtrace: CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)} Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021 Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 dump_stack+0x10/0x20 print_circular_bug+0x285/0x360 check_noncircular+0x135/0x150 ? register_lock_class+0x48/0x4a0 __lock_acquire+0x1661/0x2860 lock_acquire+0xc4/0x2f0 ? __flush_work+0x25d/0x660 ? mark_held_locks+0x46/0x90 ? __flush_work+0x25d/0x660 __flush_work+0x27a/0x660 ? __flush_work+0x25d/0x660 ? trace_hardirqs_on+0x1e/0xd0 ? __pfx_wq_barrier_func+0x10/0x10 flush_delayed_work+0x5d/0xa0 dev_coredump_put+0x63/0xa0 xe_driver_devcoredump_fini+0x12/0x20 [xe] devm_action_release+0x12/0x30 release_nodes+0x3a/0x120 devres_release_all+0x8a/0xd0 device_unbind_cleanup+0x12/0x80 device_release_driver_internal+0x23a/0x280 ? bus_find_device+0xa8/0xe0 device_driver_detach+0x14/0x20 unbind_store+0xaf/0xc0 drv_attr_store+0x21/0x50 sysfs_kf_write+0x4a/0x80 kernfs_fop_write_iter+0x169/0x220 vfs_write+0x293/0x560 ksys_write+0x72/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x2bf/0x2660 do_syscall_64+0x93/0xb60 ? __f_unlock_pos+0x15/0x20 ? __x64_sys_getdents64+0x9b/0x130 ? __pfx_filldir64+0x10/0x10 ? do_syscall_64+0x1a2/0xb60 ? clear_bhb_loop+0x30/0x80 ? clear_bhb_loop+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x76e292edd574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574 RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063 R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000 </TASK> xe 0000:03:00.0: [drm] Xe device coredump has been deleted. Fixes: 01daccf ("devcoredump : Serialize devcd_del work") Cc: Mukesh Ojha <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Cc: [email protected] # v6.1+ Signed-off-by: Maarten Lankhorst <[email protected]> Cc: Matthew Brost <[email protected]> Acked-by: Mukesh Ojha <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Update README

d467e65

klausenbusk closed this Jan 4, 2022

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Update README #4

Update README #4

Uh oh!

IdanKoblik commented Dec 26, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Update README #4

Update README #4

Uh oh!

Conversation

IdanKoblik commented Dec 26, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants