Tracking the "next" project

[jessebraham]

This work is inspired largely by the same effort already undergone in esp-idf-hal, which in turn was based on the work done in embassy.

https://github.com/esp-rs/esp-idf-hal
https://github.com/embassy-rs/embassy

Development will be done in the next branch. I have added a single commit which adds some types, traits, and macros which will be required for development.

https://github.com/esp-rs/esp-hal/tree/next

This branch will be periodically rebased on main to keep it in sync as much as possible. As we're able we can merge changes into main, repeating this until the process is complete.

A number of peripherals will need their high-level interfaces re-written, though we can likely take this directly from esp-idf-hal with only minor modification. Hopefully most of the low-level code can be kept and/or adapted.

Tasks

The tasks below do not need to be completed in any particular order.

If you plan to implement the necessary updates for a peripheral please leave a comment below indicating such.

• ADC (Peripheral ref/adc #321)
• ClockControl (PeripheralRef for ClockControl #316)
• DAC (Peripheral ref/adc #321)
• DMA (PeripheralRef: DMA #317)
• GPIO (Peripheral ref/gpio #323)
• I2C (Peripheral ref/i2c #303)
• I2S (PeripheralRef: I2S #313)
• LEDC (PeripheralRef: LEDC #307)
• MCPWM (PeripheralRef: MCPWM #314)
• RMT (PeripheralRef: RMT #310)
• RNG (Peripheral ref/rng #306)
• RTC (PeripheralRef: RTC #319)
• SHA (Peripheral ref/sha #312)
• SPI (PeripheralRef/spi #299)
• SYSTEM (PeripheralRef for SYSTEM/DPORT #305)
• SYSTIMER (Peripheral ref/systimer #302)
• TIMG (PeripheralRef: TIMG #320)
• TWAI (Initial TWAI Driver Implementation #192)
• UART (PeripheralRef init: uart #272)
• USB_OTG (PeripheralRef: USB_OTG #318)
• USB_SERIAL_JTAG (Peripheral ref/usb #304)

[jessebraham]

I have previously done some work on both the UART and GPIO modules, and will get both projects cleaned up and pushed to branches soon.

[jessebraham]

With #272 merged we have all the required building blocks to move forward with this, plus a UART implementation for reference.

[bjoernQ]

For reference: #299 is a good example what needs to be done to convert a peripheral driver to the use the PeripheralRef pattern

[MabezDev]

Working on SYSTIMER

[jessebraham]

Working on I2C

[SergioGasquez]

Working on USB

[jessebraham]

Have RNG finished locally (will PR tomorrow) and then I'll tackle SHA after that.

[bjoernQ]

Working on SYSTEM/DPORT

[JurajSadel]

Working on ADC, RMT, I2S.

[SergioGasquez]

Working on TIMG

[MabezDev]

Working on LEDC ☠️