bpf: add schedule points in batch ops #33
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner. Fixes: aa2e93b ("bpf: Add generic support for update and delete batch ops") Fixes: cb4d03a ("bpf: Add generic support for lookup batch op") Signed-off-by: Eric Dumazet <[email protected]> Cc: Brian Vazquez <[email protected]> Cc: Stanislav Fomichev <[email protected]> Reported-by: syzbot <[email protected]>
Author
|
Master branch: 45ce4b4 |
Author
|
At least one diff in series https://patchwork.kernel.org/project/netdevbpf/list/?series=615524 irrelevant now. Closing PR. |
kernel-patches-bot
pushed a commit
that referenced
this pull request
Apr 27, 2022
The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Patrick Wang <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Jul 23, 2022
This patch fixes a build error reported in the link. [0]
unix_connect.c: In function ‘unix_connect_test’:
unix_connect.c:115:55: error: expected identifier before ‘(’ token
#define offsetof(type, member) ((size_t)&((type *)0)->(member))
^
unix_connect.c:128:12: note: in expansion of macro ‘offsetof’
addrlen = offsetof(struct sockaddr_un, sun_path) + variant->len;
^~~~~~~~
We can fix this by removing () around member, but checkpatch will complain
about it, and the root cause of the build failure is that I followed the
warning and fixed this in the v2 -> v3 change of the blamed commit. [1]
CHECK: Macro argument 'member' may be better as '(member)' to avoid precedence issues
#33: FILE: tools/testing/selftests/net/af_unix/unix_connect.c:115:
+#define offsetof(type, member) ((size_t)&((type *)0)->member)
To avoid this warning, let's use offsetof() defined in stddef.h instead.
[0]: https://lore.kernel.org/linux-mm/[email protected]/
[1]: https://lore.kernel.org/netdev/[email protected]/
Fixes: e95ab1d ("selftests: net: af_unix: Test connect() with different netns.")
Reported-by: kernel test robot <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
kernel-patches-bot
pushed a commit
that referenced
this pull request
Dec 8, 2022
By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases
multiple times and eventually it will wrap around the maximum number
(i.e., 255).
This patch prevents this by adding a boundary check with
L2CAP_MAX_CONF_RSP
Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64) 0.264594
= Note: Bluetooth subsystem version 2.22 0.264636
@ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00 [hci0] 13.900426
(...)
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106
invalid packet size (12 != 1033)
08 00 01 00 02 01 04 00 01 10 ff ff ............
> ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561
invalid packet size (14 != 1547)
0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@.....
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@.......
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@.......
= bluetoothd: Bluetooth daemon 5.43 14.401828
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753
invalid packet size (12 != 1033)
08 00 01 00 04 01 04 00 40 00 00 00 ........@...
Signed-off-by: Sungwoo Kim <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Sep 22, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in non-sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]> Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Sep 22, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in non-sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]> Signed-off-by: Yafang Shao <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 5, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 5, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 5, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 6, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 6, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 6, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 6, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 7, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 9, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 9, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 9, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 11, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 12, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 13, 2023
When employed within a sleepable program not under RCU protection, the use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log, particularly when CONFIG_PROVE_RCU is enabled. [ 1259.662354] ============================= [ 1259.662357] WARNING: suspicious RCU usage [ 1259.662358] 6.5.0+ #33 Not tainted [ 1259.662360] ----------------------------- [ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage! [ 1259.662364] other info that might help us debug this: [ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1 [ 1259.662368] 1 lock held by trace/72954: [ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0 [ 1259.662383] stack backtrace: [ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33 [ 1259.662391] Call Trace: [ 1259.662393] <TASK> [ 1259.662395] dump_stack_lvl+0x6e/0x90 [ 1259.662401] dump_stack+0x10/0x20 [ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0 [ 1259.662412] task_css_set.part.0+0x23/0x30 [ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0 [ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93 [ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000 [ 1259.662439] bpf_lsm_bpf+0x5/0x20 [ 1259.662443] ? security_bpf+0x32/0x50 [ 1259.662452] __sys_bpf+0xe6/0xdd0 [ 1259.662463] __x64_sys_bpf+0x1a/0x30 [ 1259.662467] do_syscall_64+0x38/0x90 [ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1259.662479] RIP: 0033:0x7f487baf8e29 ... [ 1259.662504] </TASK> This issue can be reproduced by executing a straightforward program, as demonstrated below: SEC("lsm.s/bpf") int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size) { struct cgroup *cgrp = NULL; struct task_struct *task; int ret = 0; if (cmd != BPF_LINK_CREATE) return 0; // The cgroup2 should be mounted first cgrp = bpf_cgroup_from_id(1); if (!cgrp) goto out; task = bpf_get_current_task_btf(); if (bpf_task_under_cgroup(task, cgrp)) ret = -1; bpf_cgroup_release(cgrp); out: return ret; } After running the program, if you subsequently execute another BPF program, you will encounter the warning. It's worth noting that task_under_cgroup_hierarchy() is also utilized by bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup() doesn't exhibit this issue because it cannot be used in sleepable BPF programs. Fixes: b5ad4cd ("bpf: Add bpf_task_under_cgroup() kfunc") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Cc: Feng Zhou <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 1, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 2, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 3, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 3, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 6, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 6, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 6, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 7, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 8, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 9, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 9, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 9, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 12, 2024
This will add eBPF JIT support to the 32-bit ARCv2 processors. The implementation is qualified by running the BPF tests on a Synopsys HSDK board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU. The test_bpf.ko reports 2-10 fold improvements in execution time of its tests. For instance: test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS Deployment and structure ------------------------ The related codes are added to "arch/arc/net": - bpf_jit.h -- The interface that a back-end translator must provide - bpf_jit_core.c -- Knows how to handle the input eBPF byte stream - bpf_jit_arcv2.c -- The back-end code that knows the translation logic The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance to the whole process. Normally, the translation is done in one pass, namely the "normal pass". In case some relocations are not known during this pass, some data (arc_jit_data) is allocated for the next pass to come. This possible next (and last) pass is called the "extra pass". 1. Normal pass # The necessary pass 1a. Dry run # Get the whole JIT length, epilogue offset, etc. 1b. Emit phase # Allocate memory and start emitting instructions 2. Extra pass # Only needed if there are relocations to be fixed 2a. Patch relocations Support status -------------- The JIT compiler supports BPF instructions up to "cpu=v4". However, it does not yet provide support for: - Tail calls - Atomic operations - 64-bit division/remainder - BPF_PROBE_MEM* (exception table) The result of "test_bpf" test suite on an HSDK board is: hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] All the failing test cases are due to the ones that were not JIT'ed. Categorically, they can be represented as: .-----------.------------.-------------. | test type | opcodes | # of cases | |-----------+------------+-------------| | atomic | 0xC3, 0xDB | 149 | | div64 | 0x37, 0x3F | 22 | | mod64 | 0x97, 0x9F | 15 | `-----------^------------+-------------| | (total) 186 | `-------------' Setup: build config ------------------- The following configs must be set to have a working JIT test: CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_TEST_BPF=m The following options are not necessary for the tests module, but are good to have: CONFIG_DEBUG_INFO=y # prerequisite for below CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h CONFIG_FTRACE=y # CONFIG_BPF_SYSCALL=y # all these options lead to CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y CONFIG_PERF_EVENTS=y # Some BPF programs provide data through /sys/kernel/debug: CONFIG_DEBUG_FS=y arc# mount -t debugfs debugfs /sys/kernel/debug Setup: elfutils --------------- The libdw.{so,a} library that is used by pahole for processing the final binary must come from elfutils 0.189 or newer. The support for ARCv2 [1] has been added since that version. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7 Setup: pahole ------------- The line below in linux/scripts/Makefile.btf must be commented out: pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats Or else, the build will fail: $ make V=1 ... BTF .btf.vmlinux.bin.o pahole -J --btf_gen_floats \ -j --lang_exclude=rust \ --skip_encoding_btf_inconsistent_proto \ --btf_gen_optimized .tmp_vmlinux.btf Complex, interval and imaginary float types are not supported Encountered error while encoding BTF. ... BTFIDS vmlinux ./tools/bpf/resolve_btfids/resolve_btfids vmlinux libbpf: failed to find '.BTF' ELF section in vmlinux FAILED: load BTF from vmlinux: No data available This is due to the fact that the ARC toolchains generate "complex float" DIE entries in libgcc and at the moment, pahole can't handle such entries. Running the tests ----------------- host$ scp /bld/linux/lib/test_bpf.ko arc: arc # sysctl net.core.bpf_jit_enable=1 arc # insmod test_bpf.ko test_suite=test_bpf ... test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed] Acknowledgments --------------- - Claudiu Zissulescu for his unwavering support - Yuriy Kolerov for testing and troubleshooting - Vladimir Isaev for the pahole workaround - Sergey Matyukevich for paving the road by adding the interpreter support Signed-off-by: Shahab Vahedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
May 31, 2024
During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. Signed-off-by: Wang Yong <[email protected]> Reviewed-by: Lu Zhongjun <[email protected]> Reviewed-by: Yang Tao <[email protected]> Cc: Xu Xin <[email protected]> Cc: Yang Yang <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Aug 2, 2024
Jakub reported bpf selftest "btf_dump" failure after forwarding to v6.11-rc1 with netdev. Error: #33 btf_dump Error: #33/15 btf_dump/btf_dump: var_data btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 The reason for the failure is due to commit 94ede2a ("profiling: remove stale percpu flip buffer variables") where percpu static variable "cpu_profile_flip" is removed. Let us replace "cpu_profile_flip" with a variable in bpf subsystem so whenever that variable gets deleted or renamed, we can detect the failure immediately. In this case, I picked a static percpu variable "bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c. Reported-by: Jakub Kicinski <[email protected]> Signed-off-by: Yonghong Song <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Aug 2, 2024
Jakub reported bpf selftest "btf_dump" failure after forwarding to v6.11-rc1 with netdev. Error: #33 btf_dump Error: #33/15 btf_dump/btf_dump: var_data btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 The reason for the failure is due to commit 94ede2a ("profiling: remove stale percpu flip buffer variables") where percpu static variable "cpu_profile_flip" is removed. Let us replace "cpu_profile_flip" with a variable in bpf subsystem so whenever that variable gets deleted or renamed, we can detect the failure immediately. In this case, I picked a static percpu variable "bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c. Reported-by: Jakub Kicinski <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Nov 18, 2024
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the following code flow, the RCU read lock is not held, causing the following error when `RCU_PROVE` is not held. The same problem might show up in the IPv6 code path. 6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N ----------------------------- net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!! rcu_scheduler_active = 2, debug_locks = 1 2 locks held by RetransmitAggre/3519: #0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290 #1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90 stack backtrace: lockdep_rcu_suspicious mr_table_dump ipmr_rtm_dumproute rtnl_dump_all rtnl_dumpit netlink_dump __netlink_dump_start rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg This is not a problem per see, since the RTNL lock is held here, so, it is safe to iterate in the list without the RCU read lock, as suggested by Eric. To alleviate the concern, modify the code to use list_for_each_entry_rcu() with the RTNL-held argument. The annotation will raise an error only if RTNL or RCU read lock are missing during iteration, signaling a legitimate problem, otherwise it will avoid this false positive. This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls this function as well. Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Feb 14, 2025
Some of the platforms may connect the INT pin via inversion logic effectively make the triggering to be active-low. Remove explicit trigger flag to respect the settings from firmware. Without this change even idling chip produces spurious interrupts and kernel disables the line in the result: irq 33: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 125 Comm: irq/33-i2c-INT3 Not tainted 6.12.0-00236-g8b874ed11dae #64 Hardware name: Intel Corp. QUARK/Galileo, BIOS 0x01000900 01/01/2014 ... handlers: [<86e86bea>] irq_default_primary_handler threaded [<d153e44a>] cy8c95x0_irq_handler [pinctrl_cy8c95x0] Disabling IRQ #33 Fixes: e6cbbe4 ("pinctrl: Add Cypress cy8c95x0 support") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Aug 2, 2025
Without the change `perf `hangs up on charaster devices. On my system
it's enough to run system-wide sampler for a few seconds to get the
hangup:
$ perf record -a -g --call-graph=dwarf
$ perf report
# hung
`strace` shows that hangup happens on reading on a character device
`/dev/dri/renderD128`
$ strace -y -f -p 2780484
strace: Process 2780484 attached
pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached
It's call trace descends into `elfutils`:
$ gdb -p 2780484
(gdb) bt
#0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0)
at ../sysdeps/unix/sysv/linux/pread64.c:25
#1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1
#2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 ()
from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0)
at util/dso.h:537
#6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114
#7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242
#8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0,
thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127,
best_effort=best_effort@entry=false) at util/thread.h:152
#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0,
sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939
#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540,
max_stack=127, symbols=true) at util/machine.c:2920
#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440,
sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true)
at util/machine.c:2970
#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440,
sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198
#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0,
evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127
#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127,
arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255
#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540,
evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334
#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0,
file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367
#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245
#22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324
#23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224,
file_path=0x105ffbf0 "perf.data") at util/session.c:1419
#24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0,
--Type <RET> for more, q to quit, c to continue without paging--
quit
prog=prog@entry=0x7fff9df81220) at util/session.c:2132
#25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220)
at util/session.c:2181
#26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226
#27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390
#28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076
#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827
#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0)
at perf.c:351
#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404
#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448
#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556
The hangup happens because nothing in` perf` or `elfutils` checks if a
mapped file is easily readable.
The change conservatively skips all non-regular files.
Signed-off-by: Sergei Trofimovich <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
kernel-patches-daemon-bpf-rc bot
pushed a commit
that referenced
this pull request
Oct 1, 2025
The hfsplus_strcasecmp() logic can trigger the issue: [ 117.317703][ T9855] ================================================================== [ 117.318353][ T9855] BUG: KASAN: slab-out-of-bounds in hfsplus_strcasecmp+0x1bc/0x490 [ 117.318991][ T9855] Read of size 2 at addr ffff88802160f40c by task repro/9855 [ 117.319577][ T9855] [ 117.319773][ T9855] CPU: 0 UID: 0 PID: 9855 Comm: repro Not tainted 6.17.0-rc6 #33 PREEMPT(full) [ 117.319780][ T9855] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 117.319783][ T9855] Call Trace: [ 117.319785][ T9855] <TASK> [ 117.319788][ T9855] dump_stack_lvl+0x1c1/0x2a0 [ 117.319795][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319803][ T9855] ? __pfx_dump_stack_lvl+0x10/0x10 [ 117.319808][ T9855] ? rcu_is_watching+0x15/0xb0 [ 117.319816][ T9855] ? lock_release+0x4b/0x3e0 [ 117.319821][ T9855] ? __kasan_check_byte+0x12/0x40 [ 117.319828][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319835][ T9855] ? __virt_addr_valid+0x4a5/0x5c0 [ 117.319842][ T9855] print_report+0x17e/0x7e0 [ 117.319848][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319855][ T9855] ? __virt_addr_valid+0x4a5/0x5c0 [ 117.319862][ T9855] ? __phys_addr+0xd3/0x180 [ 117.319869][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490 [ 117.319876][ T9855] kasan_report+0x147/0x180 [ 117.319882][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490 [ 117.319891][ T9855] hfsplus_strcasecmp+0x1bc/0x490 [ 117.319900][ T9855] ? __pfx_hfsplus_cat_case_cmp_key+0x10/0x10 [ 117.319906][ T9855] hfs_find_rec_by_key+0xa9/0x1e0 [ 117.319913][ T9855] __hfsplus_brec_find+0x18e/0x470 [ 117.319920][ T9855] ? __pfx_hfsplus_bnode_find+0x10/0x10 [ 117.319926][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10 [ 117.319933][ T9855] ? __pfx___hfsplus_brec_find+0x10/0x10 [ 117.319942][ T9855] hfsplus_brec_find+0x28f/0x510 [ 117.319949][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10 [ 117.319956][ T9855] ? __pfx_hfsplus_brec_find+0x10/0x10 [ 117.319963][ T9855] ? __kmalloc_noprof+0x2a9/0x510 [ 117.319969][ T9855] ? hfsplus_find_init+0x8c/0x1d0 [ 117.319976][ T9855] hfsplus_brec_read+0x2b/0x120 [ 117.319983][ T9855] hfsplus_lookup+0x2aa/0x890 [ 117.319990][ T9855] ? __pfx_hfsplus_lookup+0x10/0x10 [ 117.320003][ T9855] ? d_alloc_parallel+0x2f0/0x15e0 [ 117.320008][ T9855] ? __lock_acquire+0xaec/0xd80 [ 117.320013][ T9855] ? __pfx_d_alloc_parallel+0x10/0x10 [ 117.320019][ T9855] ? __raw_spin_lock_init+0x45/0x100 [ 117.320026][ T9855] ? __init_waitqueue_head+0xa9/0x150 [ 117.320034][ T9855] __lookup_slow+0x297/0x3d0 [ 117.320039][ T9855] ? __pfx___lookup_slow+0x10/0x10 [ 117.320045][ T9855] ? down_read+0x1ad/0x2e0 [ 117.320055][ T9855] lookup_slow+0x53/0x70 [ 117.320065][ T9855] walk_component+0x2f0/0x430 [ 117.320073][ T9855] path_lookupat+0x169/0x440 [ 117.320081][ T9855] filename_lookup+0x212/0x590 [ 117.320089][ T9855] ? __pfx_filename_lookup+0x10/0x10 [ 117.320098][ T9855] ? strncpy_from_user+0x150/0x290 [ 117.320105][ T9855] ? getname_flags+0x1e5/0x540 [ 117.320112][ T9855] user_path_at+0x3a/0x60 [ 117.320117][ T9855] __x64_sys_umount+0xee/0x160 [ 117.320123][ T9855] ? __pfx___x64_sys_umount+0x10/0x10 [ 117.320129][ T9855] ? do_syscall_64+0xb7/0x3a0 [ 117.320135][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320141][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320145][ T9855] do_syscall_64+0xf3/0x3a0 [ 117.320150][ T9855] ? exc_page_fault+0x9f/0xf0 [ 117.320154][ T9855] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320158][ T9855] RIP: 0033:0x7f7dd7908b07 [ 117.320163][ T9855] Code: 23 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 08 [ 117.320167][ T9855] RSP: 002b:00007ffd5ebd9698 EFLAGS: 00000202 ORIG_RAX: 00000000000000a6 [ 117.320172][ T9855] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7dd7908b07 [ 117.320176][ T9855] RDX: 0000000000000009 RSI: 0000000000000009 RDI: 00007ffd5ebd9740 [ 117.320179][ T9855] RBP: 00007ffd5ebda780 R08: 0000000000000005 R09: 00007ffd5ebd9530 [ 117.320181][ T9855] R10: 00007f7dd799bfc0 R11: 0000000000000202 R12: 000055e2008b32d0 [ 117.320184][ T9855] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 117.320189][ T9855] </TASK> [ 117.320190][ T9855] [ 117.351311][ T9855] Allocated by task 9855: [ 117.351683][ T9855] kasan_save_track+0x3e/0x80 [ 117.352093][ T9855] __kasan_kmalloc+0x8d/0xa0 [ 117.352490][ T9855] __kmalloc_noprof+0x288/0x510 [ 117.352914][ T9855] hfsplus_find_init+0x8c/0x1d0 [ 117.353342][ T9855] hfsplus_lookup+0x19c/0x890 [ 117.353747][ T9855] __lookup_slow+0x297/0x3d0 [ 117.354148][ T9855] lookup_slow+0x53/0x70 [ 117.354514][ T9855] walk_component+0x2f0/0x430 [ 117.354921][ T9855] path_lookupat+0x169/0x440 [ 117.355325][ T9855] filename_lookup+0x212/0x590 [ 117.355740][ T9855] user_path_at+0x3a/0x60 [ 117.356115][ T9855] __x64_sys_umount+0xee/0x160 [ 117.356529][ T9855] do_syscall_64+0xf3/0x3a0 [ 117.356920][ T9855] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.357429][ T9855] [ 117.357636][ T9855] The buggy address belongs to the object at ffff88802160f000 [ 117.357636][ T9855] which belongs to the cache kmalloc-2k of size 2048 [ 117.358827][ T9855] The buggy address is located 0 bytes to the right of [ 117.358827][ T9855] allocated 1036-byte region [ffff88802160f000, ffff88802160f40c) [ 117.360061][ T9855] [ 117.360266][ T9855] The buggy address belongs to the physical page: [ 117.360813][ T9855] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x21608 [ 117.361562][ T9855] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 117.362285][ T9855] flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) [ 117.362929][ T9855] page_type: f5(slab) [ 117.363282][ T9855] raw: 00fff00000000040 ffff88801a842f00 ffffea0000932000 dead000000000002 [ 117.364015][ T9855] raw: 0000000000000000 0000000080080008 00000000f5000000 0000000000000000 [ 117.364750][ T9855] head: 00fff00000000040 ffff88801a842f00 ffffea0000932000 dead000000000002 [ 117.365491][ T9855] head: 0000000000000000 0000000080080008 00000000f5000000 0000000000000000 [ 117.366232][ T9855] head: 00fff00000000003 ffffea0000858201 00000000ffffffff 00000000ffffffff [ 117.366968][ T9855] head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 [ 117.367711][ T9855] page dumped because: kasan: bad access detected [ 117.368259][ T9855] page_owner tracks the page as allocated [ 117.368745][ T9855] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN1 [ 117.370541][ T9855] post_alloc_hook+0x240/0x2a0 [ 117.370954][ T9855] get_page_from_freelist+0x2101/0x21e0 [ 117.371435][ T9855] __alloc_frozen_pages_noprof+0x274/0x380 [ 117.371935][ T9855] alloc_pages_mpol+0x241/0x4b0 [ 117.372360][ T9855] allocate_slab+0x8d/0x380 [ 117.372752][ T9855] ___slab_alloc+0xbe3/0x1400 [ 117.373159][ T9855] __kmalloc_cache_noprof+0x296/0x3d0 [ 117.373621][ T9855] nexthop_net_init+0x75/0x100 [ 117.374038][ T9855] ops_init+0x35c/0x5c0 [ 117.374400][ T9855] setup_net+0x10c/0x320 [ 117.374768][ T9855] copy_net_ns+0x31b/0x4d0 [ 117.375156][ T9855] create_new_namespaces+0x3f3/0x720 [ 117.375613][ T9855] unshare_nsproxy_namespaces+0x11c/0x170 [ 117.376094][ T9855] ksys_unshare+0x4ca/0x8d0 [ 117.376477][ T9855] __x64_sys_unshare+0x38/0x50 [ 117.376879][ T9855] do_syscall_64+0xf3/0x3a0 [ 117.377265][ T9855] page last free pid 9110 tgid 9110 stack trace: [ 117.377795][ T9855] __free_frozen_pages+0xbeb/0xd50 [ 117.378229][ T9855] __put_partials+0x152/0x1a0 [ 117.378625][ T9855] put_cpu_partial+0x17c/0x250 [ 117.379026][ T9855] __slab_free+0x2d4/0x3c0 [ 117.379404][ T9855] qlist_free_all+0x97/0x140 [ 117.379790][ T9855] kasan_quarantine_reduce+0x148/0x160 [ 117.380250][ T9855] __kasan_slab_alloc+0x22/0x80 [ 117.380662][ T9855] __kmalloc_noprof+0x232/0x510 [ 117.381074][ T9855] tomoyo_supervisor+0xc0a/0x1360 [ 117.381498][ T9855] tomoyo_env_perm+0x149/0x1e0 [ 117.381903][ T9855] tomoyo_find_next_domain+0x15ad/0x1b90 [ 117.382378][ T9855] tomoyo_bprm_check_security+0x11c/0x180 [ 117.382859][ T9855] security_bprm_check+0x89/0x280 [ 117.383289][ T9855] bprm_execve+0x8f1/0x14a0 [ 117.383673][ T9855] do_execveat_common+0x528/0x6b0 [ 117.384103][ T9855] __x64_sys_execve+0x94/0xb0 [ 117.384500][ T9855] [ 117.384706][ T9855] Memory state around the buggy address: [ 117.385179][ T9855] ffff88802160f300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 117.385854][ T9855] ffff88802160f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 117.386534][ T9855] >ffff88802160f400: 00 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 117.387204][ T9855] ^ [ 117.387566][ T9855] ffff88802160f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 117.388243][ T9855] ffff88802160f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 117.388918][ T9855] ================================================================== The issue takes place if the length field of struct hfsplus_unistr is bigger than HFSPLUS_MAX_STRLEN. The patch simply checks the length of comparing strings. And if the strings' length is bigger than HFSPLUS_MAX_STRLEN, then it is corrected to this value. v2 The string length correction has been added for hfsplus_strcmp(). Reported-by: Jiaming Zhang <[email protected]> Signed-off-by: Viacheslav Dubeyko <[email protected]> cc: John Paul Adrian Glaubitz <[email protected]> cc: Yangtao Li <[email protected]> cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Viacheslav Dubeyko <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Pull request for series with
subject: bpf: add schedule points in batch ops
version: 1
url: https://patchwork.kernel.org/project/netdevbpf/list/?series=615524