meta-mbed-raspberrypi

This README file contains information on the contents of the meta-mbed-raspberrypi layer.

The meta-mbed-raspberrypi layer contains mbed_sdcard_image-rpi-class that can be used to build an SD-card image capable of firmware update through Mbed Cloud Client. In practice this means an image with additional partitions and u-boot bootloader.

To use this layer, use the supplied local.conf.sample or add following lines to your local.conf-file:

MACHINE = "mbed-rpi3"
KERNEL_IMAGETYPE="uImage"
#ENABLE_UART is strictly not necessary, but can help with debugging issues.
ENABLE_UART="1"

Dependencies

The Mbed Edge on Raspberry Pi 3 is currently tested on top of the morty-version of the Yocto and with this layer. The following repositories are required to build an image with Raspberry Pi 3 support:

poky

meta-openembedded

meta-raspberrypi

Adding the meta-mbed-raspberrypi layer to your build

In order to use this layer, you need to make the build system aware of it.

Assuming the meta-mbed-raspberrypi layer exists at the top-level of your Yocto build tree, you can add it to the build system by adding the location of the meta-mbed-raspberrypi layer to bblayers.conf, along with any other layers needed. e.g.:

  BBLAYERS ?= " \
    /path/to/yocto/meta \
    /path/to/yocto/meta-poky \
    /path/to/yocto/meta-openembedded \
    /path/to/yocto/meta-raspberrypi
    /path/to/yocto/meta-mbed-raspberrypi \
    "