Pi 5 support

[adminy]

Awesome project! As you know some things are going out of nixpkgs repo for 24.11, and official support for the pi 5 won't be prioritised. So I'm looking forward to see that support here!

Thanks

[tstat]

Thanks! Raspberry pi 5 support was added in b39b556, just not with uboot, so you need to disable it with raspberry-pi-nix.uboot.enable = false (option documented here).

[adminy]

wifi seems to not be working.

iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

[malteneuss]

As far as i know basic pi 5 support (e.g. booting from SD but not USB,NVMe) was added in uboot version 2024.04, which has already landed in nixpkgs-unstable https://github.com/NixOS/nixpkgs/blob/8f9b659d9fb9af9d39cef689e2c3da5dd661b23a/pkgs/misc/uboot/default.nix#L31

Would that help here to not need to disable uboot?

[tstat]

Oh great, I didn't know a new version of uboot was released. I'll probably give it a test later. If you feel motivated to test it, then you probably just need to update the source and version in these two places.

https://github.com/tstat/raspberry-pi-nix/blob/master/flake.nix#L7
https://github.com/tstat/raspberry-pi-nix/blob/master/overlays/default.nix#L46

[tstat]

@adminy hard to have anything to reply to without more information. Wifi, bluetooth, etc all work fine with my pi 5 and the example project linked in the readme. I've been using it with nixos for months.

[malteneuss]

@tstat I'll wait for the bump to land in your main branch ;) I'm currently working on the documentation for NixOS on Pi 5 at https://wiki.nixos.org/wiki/NixOS_on_ARM/Raspberry_Pi_5 and tinkering with how to use the official Pi 5 Debian OS with Nix as a remote builder to native-build a pre-setup NixOS image using your flake (i couldn't get cross-compile to work, and emulated native-compile is way too slow). The goal is to document the steps and make it easy for people to get NixOS on the Pi until NixOS hardware has better Pi 5 support and cached compiled kernels.

Thinking of which, do you see a way to move this setup to NixOS-hardware for greater visibility? (Some generic kernel was introduced recently with NixOS/nixos-hardware#927) I wasn't able to find your repo until someone mentioned it. And btw, could you explain why we would want uboot when it seems to work without? Other people are pushing for UEFI, because only it would allow the usual systemd-boot bootloader with support for different NixOS generations; as i understood uboot wouldn't support that.

[shnCanos]

Hello, this might be a bit of a noob question, but how is the option raspberry-pi-nix.uboot.enable = false meant to be enabled? With the configuration below (which is the example repo with a modified modules section)

{
  description = "raspberry-pi-nix example";
  nixConfig = {
    extra-substituters = [ "https://raspberry-pi-nix.cachix.org" ];
    extra-trusted-public-keys = [
      "raspberry-pi-nix.cachix.org-1:WmV2rdSangxW0rZjY/tBvBDSaNFQ3DyEQsVw8EvHn9o="
    ];
  };
  inputs = {
    nixpkgs.url = "github:NixOS/nixpkgs/8bf65f17d8070a0a490daf5f1c784b87ee73982c";
    raspberry-pi-nix.url = "github:tstat/raspberry-pi-nix";
  };

  outputs = { self, nixpkgs, raspberry-pi-nix }:
    let
      inherit (nixpkgs.lib) nixosSystem;
      basic-config = { pkgs, lib, ... }: {
        time.timeZone = "America/New_York";
        users.users.root.initialPassword = "root";
        networking = {
          hostName = "basic-example";
          useDHCP = false;
          interfaces = { wlan0.useDHCP = true; };
        };
        environment.systemPackages = with pkgs; [ bluez bluez-tools ];
        hardware = {
          bluetooth.enable = true;
          raspberry-pi = {
            config = {
              all = {
                base-dt-params = {
                  # enable autoprobing of bluetooth driver
                  # https://github.com/raspberrypi/linux/blob/c8c99191e1419062ac8b668956d19e788865912a/arch/arm/boot/dts/overlays/README#L222-L224
                  krnbt = {
                    enable = true;
                    value = "on";
                  };
                };
              };
            };
          };
        };
      };

    in
    {
      nixosConfigurations = {
        rpi-example = nixosSystem {
          system = "aarch64-linux";
          modules = [ raspberry-pi-nix.nixosModules.raspberry-pi basic-config { raspberry-pi-nix.uboot.enable = false; } ]; # <-- Added option here
        };
      };
    };
}

I get an error saying that the option raspberry-pi-nix.uboot doesn't exist when I run nix build --extra-experimental-features "nix-command flakes" '.#nixosConfigurations.rpi-example.config.system.build.sdImage' as root.

[malteneuss]

It works on my machine with the function-style NixOS-config for that setting:

modules = [
  raspberry-pi-nix.nixosModules.raspberry-pi
  ({ pkgs, ... }: {
     # uboot not yet supported for pi5
     # https://github.com/tstat/raspberry-pi-nix/issues/13#issuecomment-2090601812 
     raspberry-pi-nix.uboot.enable = false;
    })
   ...
];

That shouldn't make a difference, but I can't see any other difference.

[shnCanos]

Thanks for the quick reply! Nothing changed, however I'll try to investigate it and see if I can figure it out
(Editing so I don't spam this issue)
It was absolutely my bad, sorry. For anyone with the same issue, don't forget to run nix flake update in the example repo. Apparently, the flake.lock file had an outdated version of this repo which didn't have the uboot option...

[amorx1]

I've got the RPi 5 booting using the provided example, but keep getting the following error on every nixos-rebuild switch:

...
updating GRUB 2 menu ...
Failed to get blkid info (returned 512) for / on /dev/root at /nix/store/___________-install-grub.pl line 208.
warning: error(s) occured while switching to the new configuration

with a single generated fileSystem in hardware-configuration.nix:

fileSystems."/" = 
    { device = "/dev/disk/by-uuid/4444444-4444-4444-8888-888888888888";
       fsType = "ext4";
    };

Has anyone else come across this error? It looks like the derivation builds successfully but fails just as the switch is meant to happen.

[tstat]

@amorx1 it looks like you have enabled grub. This repo doesn't support that bootloader -- it only supports uboot or raspberry pi's normal boot process.

Note that this repo disables grub.
https://github.com/tstat/raspberry-pi-nix/blob/bc745f7dc1089b2fae2b54cb69e8f0a35bf5a688/rpi/default.nix#L278

[tstat]

@malteneuss

I'm currently working on the documentation for NixOS on Pi 5 at https://wiki.nixos.org/wiki/NixOS_on_ARM/Raspberry_Pi_5 and tinkering with how to use the official Pi 5 Debian OS with Nix as a remote builder to native-build a pre-setup NixOS image using your flake (i couldn't get cross-compile to work, and emulated native-compile is way too slow). The goal is to document the steps and make it easy for people to get NixOS on the Pi until NixOS hardware has better Pi 5 support and cached compiled kernels.

Oh, very cool. I compile the raspberry pi kernel on nixos-running raspberry pis. Note that I have sd images of releases in the example repo.

Thinking of which, do you see a way to move this setup to NixOS-hardware for greater visibility? (Some generic kernel was introduced recently with NixOS/nixos-hardware#927)

I'm happy to discuss moving this stuff to somewhere more visible.

And btw, could you explain why we would want uboot when it seems to work without? Other people are pushing for UEFI, because only it would allow the usual systemd-boot bootloader with support for different NixOS generations; as i understood uboot wouldn't support that.

uboot supports different NixOS generations -- when you boot up the example config for example it presents a list of previous generations to select from if desired. This is presented over hdmi and uart.

[tstat]

pi 5 works with uboot as well in latest release https://github.com/tstat/raspberry-pi-nix/releases/tag/v0.3.0