sht_7x for arduino

Repository for Sensirion humidity and temperature sensor support on Arduino

Supported sensors:

• SHT71
• SHT75

Installation

Download arduino-sht either via git or from the releases page and place it in your Arduino/libraries directory. After restarting the Arduino IDE, you will see the new SHTSensor menu items under libraries and examples.

Integrating it into your sketch

Assuming you installed the library as described above, the following steps are necessary:

1. Import the arduino-sht library: From the menu bar, select Sketch >Import Library > sht_7x_for_arduino
2. Create an instance of the SHT_7x class and pass SCK and DATA pins numbrs as augument to consructor (SHT_7x sht(A3,A4);)
3. In setup(), make sure to init the library with sht.init()
4. If you want to use the serial console, remember to initialize the Serial library with Serial.begin(9600)
5. Call sht.readSample() in the loop() function, which reads a temperature and humidity sample from the sensor
6. Use sht.getHumidity() and sht.getTemperature() to read the values the sensor

Sample code

#include <sht_7x.h>

//create an instace of sensor for read from PB7 and PB7 in stm32 micoconroller

SHT_7x sht(PB6,PB7);
void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  sht.init();

}

void loop() {
  // put your main code here, to run repeatedly:

  Serial.print("Temperature: ");
  Serial.println(sht.getTemperature());
  Serial.print("Humidity: ");
  Serial.println(sht.getHumidity());


}